PDA

View Full Version : how to solve gx20 unlocking problem


superpippa
09-13-2004, 05:27
hi to all!!!!

after 4 hours i mean 4 long hours.....i have a couple of solutions for you!!!!

1 to unlock it i uset a usb cable...the name is ma-8110p

in fact this cable is viewed by the computer as a com port (number 11) in this case you must change the port from 11 to 1 or 2 from the control panel!!

now you have a flash cable!!!!!!

2-i used the sharp unlocker 3.1 but i had broblems in connetcting....solved leaving the fone without simcard and turned on....

-3click un liberar gx20 and than connctar you will see the i mei address on left

4-pay attention here....click on aplicar seleccion

now it will work for a while and than it will say to turn the fon on by pressing the red until you see -xxxx-

to turn it on unclip the fone from the cable!!!!!!!!!!

don't touch any button on v-i-l-a-n-i unlocker

when you turned on the fone you will see xxxx but nothing happen...

now connect again the fone (turned on with the xxxx on the display) to tha cable and press again aplicar selecion....wait until says ok.....

now you have your gx 20 free!!!!!

arash111
09-13-2004, 05:35
hehehehehehehhheh :D

GSM MIND
09-13-2004, 09:21
hi to all!!!!

after 4 hours i mean 4 long hours.....i have a couple of solutions for you!!!!

1 to unlock it i uset a usb cable...the name is ma-8110p

in fact this cable is viewed by the computer as a com port (number 11) in this case you must change the port from 11 to 1 or 2 from the control panel!!

now you have a flash cable!!!!!!

2-i used the sharp unlocker 3.1 but i had broblems in connetcting....solved leaving the fone without simcard and turned on....

-3click un liberar gx20 and than connctar you will see the i mei address on left

4-pay attention here....click on aplicar seleccion

now it will work for a while and than it will say to turn the fon on by pressing the red until you see -xxxx-

to turn it on unclip the fone from the cable!!!!!!!!!!

don't touch any button on v-i-l-a-n-i unlocker

when you turned on the fone you will see xxxx but nothing happen...

now connect again the fone (turned on with the xxxx on the display) to tha cable and press again aplicar selecion....wait until says ok.....

now you have your gx 20 free!!!!!

nice man but i think this solution is too old and every body know about it but hope that u got some thing new and post here to help our forum members:)