X600 freezing

[DMD]

Hi

I have 2 X600 that are driving me mad
Have tried to flash them etc I have erased full flash written full 16mb bin changed IMEI written tfs etc

They both start up then the lcd goes off and the i button lights up blue??

Any Idea's would be great

Thanks D.

[Blartiartfast]

Shot in the dark, only had probs with one of these, and i had been flashed with x608 flash instaed of x600. EEproms are different.
Worth a try, if anything

[DMD]

@ Blartiartfast

Thanks 4 ur input have tried writing full 16mb flash from working X600 so I don't think thats the issue thanks for your input

Regards D.

[VCDVCD]

i have x600 , does ur phone freeze when using it, is it like it just crashes.

ive had this problem i was on 02 network
and it freezed all the time

but i chaanged fone to tmobile and its never done this ,, so its down to the sim card



...by the way do u know how to change imei number

[Imran_Khatri]

Try with X608 OR X600A FLASH.....
100% working.

WBR
Imran Khatri

[chubby]

Try with X608 OR X600A FLASH.....
100% working.

WBR
Imran Khatri
I am having similar problem with X600. No button works except the on/off button. Tried full flashing but still does not work.
Thanks
Chubby

[Moosani]

@chubby

dear its hw fault change mic works 100%

thanks and regards

[DMD]

@ VCDVCD Yes I know how to change IMEI and the phone never starts up so Its not the simcard thanks for ur input

@ imran khatri will try your idea do u have full dump 4 X608??

@ Chubby sometimes the fault is the mic sometimes just bath the board in ultrasonic sometimes its the varsistors on the board thats faulty

Regards D.

[Imran_Khatri]

@DMD If uor KEYPAD Hang then it is 100% Hardware Fault...but as u say Blue Screen then 100% u have flashed with x600 Firmware, Flash with X600a or X608..

WBR
Imran Khatri

[MichieMax]

Hi imran were can i download the following flashs x600,x600a,x608 pliz if u have good working link pliz send me by icq 348686003
BR
Shadow27

[ahmedksal]

Hi,
I Did One X600 Yesterday That Had A Similar Problem Like Yours. I Am Using Ust-pro. Just Erase Flex Memory And Then Write Flex Memory And Everything Will Be Ok. Have A Nice Day.