View Full Version : R6C005 Fastest Unlock Metod
ViperGSM
09-17-2004, 01:59
I had a huge problem last night,lot of t610 on unlock and no way to unlock it without flashing...With fighter 4.00 removed rsa,unlocked,then tryed to flash avr with r6c005.sbn(this file was from divlpt folder) and with checked flash rsa area only,this tooked me 10 minutes per phone.then i switched to griffin crusader,read the manual and do exactly like wroten,but phone turns on it wont boot.tryed with several cables...I also have tornado,twister,original divusb,terminator.Is there anyone who can describe me exactly fastest metod of unlocking with any of these boxes mentioned above?
Thx in advance,WBR from Zemun:)
arash111
09-17-2004, 02:32
How to unlock RSA-protected phones with Fighter 4.00 or 4.10:
Attach the phone. Fighter/Interceptor (F/I) will display "RSA protection feature ACTIVE" message.
Go to the Locks page and press the UnlockRSA button.
F/I will remove the RSA-lock from the flash and start booting the phone in an "ordinary" way. The AVR firmware will be damaged as a side-effect of removing the RSA-lock. Therefore it has to be reflashed afterwards (in the following step).
If F/I will display the firmware languagepack and version stored in the phone and you have the signed flashfile containing the same firmware, go to the Write Flash page and tick Flash RSA area only and press the Flash AVR button and select the respective firmware. The flash process should take only few seconds (less than 10). Alternatively you may flash any other AVR-firmware without ticking Flash RSA-area only, but this will take much longer to finish.
http://forum.gsmhosting.com/vbb/showthread.php?t=159373&highlight=fighter+4.00
When using Fighter, you must have the signed flash file (PM me if you need it), otherwise the Reflash RSA Only option will not work. Once you are using the signed file, flashing the RSA area takes about 3 seconds.
Muppet is 100% right.
Btw, we are preparing even faster (and more comfortable) method of RSA unlocking.
ViperGSM
09-17-2004, 11:54
I didn't have the signed flashfile,so figther must of been flashed whole avr...Does lang.pack must be the same,or i can use any r6c005 avr?If anyone had signed firmware r6c005 please send on kovacn2@yahoo.com
thx:)
@ SmileGSM
Come to my service, I have sollution for DIV, no need to flash AVR after kill RSA. But You must buy 4-5 beers.
ViperGSM
09-18-2004, 11:07
Thats too expensive for me...can you be satiesfaid with ,,GAJBA,,:):)?I'll call you
Thats too expensive for me...can you be satiesfaid with ,,GAJBA,,:):)?I'll call you
Download signed flashes for free from http://gsm-solution.com.vn/gsm-solution-download.php?path=./download/Equipment%20support/Fighter/Flash%20Files/
and use Reflash RSA area only option.
Thanks to Hakima. :)
ViperGSM
09-18-2004, 17:06
Thx Lead,i'll try it now...does the lang pack needs too be the same like the one on the phone?
Thx Lead,i'll try it now...does the lang pack needs too be the same like the one on the phone?
Yes, it has to be the same langpack and version.
We will release even faster method soon.
ViperGSM
09-18-2004, 17:36
I'm downloading it right now.I had a bad resseler,that's why i didn't managed to download signed flash files,didn't gaved me pass to support area,but thanks to hakima it's free now.Great box you've maid:)
I'm downloading it right now.I had a bad resseler,that's why i didn't managed to download signed flash files,didn't gaved me pass to support area,but thanks to hakima it's free now.Great box you've maid:)
It was not a fault of your reseller,
signed flash files can not be hosted here easily due to some legal restrictions.
I'm downloading it right now.I had a bad resseler,that's why i didn't managed to download signed flash files,didn't gaved me pass to support area,but thanks to hakima it's free now.Great box you've maid:)
If you bought you fighter from someone who's in Narry's network, you should contact me. There is chance you bought set sold by me.
We also have mirror server with new flash files.
Access is free for all fighter owners. ;) (thanks to me ;) )
ViperGSM
09-20-2004, 23:28
I downloaded signed files and sucsessfully removed RSA on many t610 today,much faster...but i didn't managed to unlock phones with fighter,direct unlock don't work,read codes also...What am i doing wrong?Remove rsa,tryed to unlock than flashed avr rsa area only,phone switch on ok but four locks...say ''rebuild security area''???Then i unlocked them all with divlpt,rebuild SP area using otp imei
gsmcaptain
09-21-2004, 00:16
shows that DIV still the best. ;)
no need to stress your brain.
1.remove RSA.
2.flash avr and modem.
3.read codes.
simple as 123.
regards.
ViperGSM
09-21-2004, 00:39
shows that DIV still the best. ;)
no need to stress your brain.
1.remove RSA.
2.flash avr and modem.
3.read codes.
simple as 123.
regards.
But still slow...I hope laser will realease his ''rsa area flash only solution'' soon
for me the fastest method is:
1. Remove RSA with DIV
2. Rebuild using OTP IMEI with DIV
3. flash signed AVR (with "relock RSA" and "flash RSA Area only" activated) with Fighter
shows that DIV still the best. ;)
no need to stress your brain.
1.remove RSA.
2.flash avr and modem.
3.read codes.
simple as 123.
regards.
Div can read code, but it doesn't mean the best. Read codes is fast, but remember that you have to enter the code to your phone :)
Div can read code, but it doesn't mean the best. Read codes is fast, but remember that you have to enter the code to your phone :)
not 100% correct... div writes the codes to the phone (always the same codes), displayes the known codes, and unlockes the phone... so entering the codes is not needed
I'm not aware of this feature, thanks for correcting...
marici24
09-23-2004, 09:55
how do zou know which are signed avr files for each phone. sorrz for being so stupid.
BR jani