T616 restarting over and over

[turon]

i think its a hardware problem after i flashed gdfs, avr, arm... problem still the same, tried also gdfs in avr format, no change.

anyone experienced this? what could be possible hardware solution for this...help is needed

b/r turon

[Gsmhq]

try to use same avr and arm version then restore old gdfs or flash new one after that master reset it if not working use twister to init locks or secblk then master reset it thru meny that worked for me.

/Gsmhq

[turon]

if there is a simcard inserted, the screen only displays blue then restarts over and over. if there is no simcard, it will show "insert sim" for a few secs and will restart over and over, same also if u charge it, it will turn on and restart after a few secs...

@ Gsmhq

i think i've done all possible software solutions in orig div usb 5.0, but again tanx for the reply

b/r turon

[hightechsquare]

this is a problem of the version no more

[turon]

yes i flashed this unit many times still i got the same result...other remedy for this?

b/r turon

[Bohosh]

Rehot the flash ics and then flash the phone again with AVR,ARM and GDFS.

[turon]

Rehot the flash ics and then flash the phone again with AVR,ARM and GDFS.

can u share a service manual of T610? im quite a newbie in SE harware...wer is the flash ic's located...pls illustrate or a picture will do

b/r turon

[kokos]

I have exactly the same problem. The only think i flashing with UFS-2 and cannot make the phone work properly.

[simpa]

Exactly the same problem with T610
restartint/blue screen

after trying to flash it with DIV

Bypass boot authority
Initialize Boot
ERROR:3005

[doctorvatson]

1 try with new battary
2 change flash ic

[simpa]

I tried already with new battery, i guess i have to change Flash IC :(

[kokos]

i always flash the phones with external power supply....I think it takes less time for the flash!
Now i have one t610 which gows on and off all the time, and onw which when the poer botton is pressed only the keyboard leds light up.Water damaged both of them, the second one looks heavily damaged as it was probably thrown in the sea, and all the contacts are hevily corroded, after some pcb repearing on the connectors i still cant get in touch with the phones parameters from UFS-2.I think this one doesn't worth a try. any ideas to make it work? :)

[simpa]

Before i change the Flash IC, can this Error 3005 ocused, because i try to flash it w/o connected LCD Display ?

[pali]

well , think its not flash ic problem .
what about power ic ?
but dont know where to find it .
in T300 it is glued..

Pali

[Beyond Matrix]

Hello I have 1 t616,configuration readed imei 123456-999999-0-02.

But with div. readed imei:FFFFFFFFFFFFFFF

Is this hardware problems?Ive done all the flashing n unlocking n reset otp still the same,I thinks it the flash ic spoil.

Please give your comments.

cheersss

[benguetcowboy1]

use div 8.4 and rebuild OTP IMEI

[Joselord]

Any solution for this yet??? Have same problem, flash it (same arv, amr, gdfs + rebuild otp imei) and still blue screen. I have Usf3 and terminator.
Thanks

[mobx montenegro]

repair shema or any kind of pictures with some explantation is very usefuly for evrybody so please