View Full Version : Furious customer & Sharp GXxx Problem
I have the same problem
I have been surfing for more than three weeks, trying every thing to unlock one Sharp ,but no luck ,regarding that all other programs comes with this dongle working 100%,
With small problems from O2x2,
Any one else has the same problem, and is there any solution?
P.S. I have 4 PCs and 2 dongles .
Furious customer
KATOUE
ali-g-string
09-18-2004, 13:18
same here m8
most progs work,
o2 x2 not all verisons work
Sharp none work, i use cable which I use with griffin but not work with furious
With which sharp did you had problem ?
Jeremy
With which sharp did you had problem ?
Jeremy
Ok, I will explain it to you, Sharp GXxx = GX15 & GX30 and let me add to this problem MT100.
Done several sharp gx30 no problem using powered cable with 9 volts
Done several sharp gx30 no problem using powered cable with 9 volts
I am using original cable, the one comes with this dongle, I do not have to try another one , if you know what I mean . :o
ROBISH_GSM
09-18-2004, 17:08
using usb cable for nec to unlock sharp
as it get power to phone
this cable for nec and sharp
B.R
ROBISH
higherzman
09-18-2004, 17:19
for gx30 and tm100 i've use a modified cable ''modified by myself'' i've taked a nec 341i usb cable i've cutted it and join it with rj45 ''uspu'' powered 9V unlocked many piéces with 1000000000% work and for gx15 i used the originale usb cable 341i that comme with furious and unlocked 1 piéce of gx15 with it
Br
using usb cable for nec to unlock sharp
as it get power to phone
this cable for nec and sharp
B.R
ROBISH
Please correct me if I am wrong, do you mean that you can use NEC (USB) data cable to unlock Sharp phones (COM), without ant modification ? :confused:
Sharp program only set phone in test mode then say to enter "2" & top right key to DIAG_FORMAT.
I did one Tm-100 today, tried 20 times, and one time it detected, and said "Phone is in test mode now, press ...."
that`s all...
i think phone can go to test mode just by 0, 3, top right key and Red key together and then DIAG_format by pressing 99 & 2
any one can try this?
Please correct me if I am wrong, do you mean that you can use NEC (USB) data cable to unlock Sharp phones (COM), without ant modification ? :confused:
Yep exactly what I said before, for GX15 use N8 cable without modification of course ;)
BR
Jeremy
@all
furious is great product i unlocked 2 tm100 1 gx30 5 gx15
for tm100/gx30
i have unibox i put the furious nec cable in uni box adjust in fbus and 5v put the mobile on and press unlock phone comes in test mode and i applied the given info and successfully unlock tm100
for gx15
install the driver
i have nec 525 usb cable connect to phone phone must be power on it wll detect the driver auto the press unlock phone in test mode and unlock 100%
i got many problem to install furious but after install its preety good device
thanks steve
keep it up
Yep exactly what I said before, for GX15 use N8 cable without modification of course ;)
BR
Jeremy
Yes , I have tried that but no luck , and I have been informed that , it is a bug in furious dongle , and steve know that , or what do you think steve, is it a bug in your dongle YES or NO , I hope we get reply from you this year :D
.:hack3r2k:.
09-21-2004, 15:19
Yes , I have tried that but no luck , and I have been informed that , it is a bug in furious dongle , and steve know that , or what do you think steve, is it a bug in your dongle YES or NO , I hope we get reply from you this year :DFOR GX30. NEC341i usb cable. First u install the drivers provided after u restart the oc. After this usually the com u need to use is com3.
FOR GX15 you need non-usb cable with small modifications.
best regards,
FuriouS Team
For me, with GX15 I used N8 (usb)cable and it worked perfectly and i'm not drunked I precise ;) and I think it's com5 not com 3 after installing drivers no offense !
BR
Jeremy
.:hack3r2k:.
09-23-2004, 23:23
For me, with GX15 I used N8 (usb)cable and it worked perfectly and i'm not drunked I precise ;) and I think it's com5 not com 3 after installing drivers no offense !
BR
Jeremy
I just gaved an example .. It could be com6 if u have other USB ports in use. I gaved an example for the case u have only 1 usb in use.
best regards,
FuriouS Team
yep man, i know I was just breaking your balls :p
BR
Jeremy
FOR GX30. NEC341i usb cable. First u install the drivers provided after u restart the oc. After this usually the com u need to use is com3.
FOR GX15 you need non-usb cable with small modifications.
best regards,
FuriouS Team
Thanks .:hack3r2k:. for the explanation, I fallowed your instructions, and I’ve used NEC n8 USB data cable with GX15, it is working 100%,
Thanks to all for your reply.
1 4 ALL & ALL 4 1
Thanks .:hack3r2k:. for the explanation, I fallowed your instructions, and I’ve used NEC n8 USB data cable with GX15, it is working 100%,
Thanks to all for your reply.
1 4 ALL & ALL 4 1
He he, man reread his instructions, you followed mine :p :p :p
But I don't care of the flowers, we play in the same team :D
BR
Jeremy
.::Zafar Communication::.
09-24-2004, 15:36
@all
furious is great product i unlocked 2 tm100 1 gx30 5 gx15
for tm100/gx30
i have unibox i put the furious nec cable in uni box adjust in fbus and 5v put the mobile on and press unlock phone comes in test mode and i applied the given info and successfully unlock tm100
for gx15
install the driver
i have nec 525 usb cable connect to phone phone must be power on it wll detect the driver auto the press unlock phone in test mode and unlock 100%
i got many problem to install furious but after install its preety good device
thanks steve
keep it up
hi
mossani can u send me system specification becasue i have not run success fully run the furious i dont know what is wrong even i change the operating system but not success ver 2 is working but latest 3 and 4 after regitring give different error
some time illegal operation
please i am using branded PIII 500mhz 128 Rom
thanks & regards
.:hack3r2k:.
09-24-2004, 15:39
He he, man reread his instructions, you followed mine :p :p :p
But I don't care of the flowers, we play in the same team :D
BR
Jeremy
Indeed i made a mistake and gaved instructions for GX15 to GX30 and vice versa. I was in a rush so excuse my small error.
best regards,
FuriouS Team
.:hack3r2k:.
09-24-2004, 15:41
hi
mossani can u send me system specification becasue i have not run success fully run the furious i dont know what is wrong even i change the operating system but not success ver 2 is working but latest 3 and 4 after regitring give different error
some time illegal operation
please i am using branded PIII 500mhz 128 Rom
thanks & regards
Can u put here a screenshot with the error and what program generated it ? We recommned to use Windows XP for our product but in u'r case i doubt it will be a good choice.
best regards,
FuriouS Team
@ hack3r2k : I know you made a small mistake ;) I love breaking balls, I do the same with steve :p
But for this problem, I have a customer which has the same mistake but only for Sharp and Sagem, it runs on a new install of XP with SP1 and without SP2, it gives the following error : A problem occured while runing <name of the soft> the programm will shut down, sorry for inconvenience, but in my case, it's not an error from registry !!!
So if someone have an idea, i'm open (not physically ;) )
BR
Jeremy
tell me modification RJ-45 cable for Sharp GX-30 i got 5 dongle and all rj-45 cable not work