View Full Version : C-100 blue screen
hi,
I've once c100 with blue screen.
Phone wasn't water damaged. I tryed flash and repair SW with UST but problem not resolved.
It's not only lcd problem because it's not possible to emergency call.
br
Deepx
Try use UST Pro 6 Cracked:
C10x
Repair SW Faults
=CostyGSM=
09-20-2004, 21:28
try to reset eprom,for me work,i use tornado box
hi i have the same problem flash phone, change display, reset phone....nothing ..... only blue screen, and display is working on another c100 big S*H*I*T*......where to download latest UST?
10x
Fallen_Angel
09-24-2004, 17:09
hi i have the same problem flash phone, change display, reset phone....nothing ..... only blue screen, and display is working on another c100 big S*H*I*T*......where to download latest UST?
10x
search in forum
B.R
Fallen_Angel
09-24-2004, 17:15
hi i have the same problem flash phone, change display, reset phone....nothing ..... only blue screen, and display is working on another c100 big S*H*I*T*......where to download latest UST?
10x
Try here
http://www.spunlock.com/samsung/ust_6_cracked_fixed_aug_2004_fixed_again.zip
B.R
i find UST6 .....and make the same with it - fulflash of this c100, factory reset phone.....nothing.....i try to make calibration settings from another phone with the same software version and update to my bluescreen phone..still nothing......i am not sure but somewhere i see solution with removing some components from c100 but i can't find this
does anyone have this /better with pic?/
10x again
your phone need a software application to correct your blue colour on lcd .
you need to upgrade .
bestman.
where to get some new updates for samsung with bulgarian language?
please give me a link
10x
Fallen_Angel
09-27-2004, 19:37
where to get some new updates for samsung with bulgarian language?
please give me a link
10x
I need to ...
10x advanced
Fallen Angel
I have the same problem and I flashed phone 50 times with all flashes and full flashed it and make reset with tornado and ust and I have done all software trials. I changed lcd also but no way and it's first lcd works well on another c100
no way until know but I think it is not software it is hardware problem but I don't know the solution until know
I have the same problem and I flashed phone 50 times with all flashes and full flashed it and make reset with tornado and ust and I have done all software trials. I changed lcd also but no way and it's first lcd works well on another c100
no way until know but I think it is not software it is hardware problem but I don't know the solution until know
Some blue screen are software problem and flashing or reset SW are enough to resolved.
Some blue screen are hardware problem and I still looking solution too.
br
Deepx
..i'm sure i was see somthing about two varistors near the LCD byt i'm not sure where is it.......
mohammad2004
11-05-2004, 03:36
1- Repair SW Faults by ust 4.20 crack or 6.0 crack by under link
2- repalce the driver lcd
3- change the lcd
100% ok
mohammad2004
11-05-2004, 03:39
by cable x100 or e700 beacuase multi color display phone for program
http://www.spunlock.com/samsung/ust_6_cracked_fixed_aug_2004_fixed_again.zip
hodafone
12-26-2004, 02:53
hihiihihih
good wooooooork
hodafone .............
I have the same problem
i put the phone in test mode with a300/400 unlock clip then i connect to cerebros v1.5 soft.
i change the imei (the same)and it repair it and then i inlock and phone work ,perfectly
try and post results
MAJESTIC PIRATE
12-27-2004, 23:14
try and check the lcd connectors . reset eprom . then replace lcd .....
ADV-MOBILELAB
12-27-2004, 23:41
test mode with a300 data cable rebuild imei
ok
hello
ihave t100 it charget otmatekly wheth thaout chaeger.
how to whork.
thanks husam badwi sudan
em_ hsko129@hotmail.c :) om :)
shachash
12-29-2004, 19:57
just try to write new IMEI and all o.k.
its work'd for me 100%
buschell
12-29-2004, 20:33
there are two solution to this problem,first use crackv6,do sw fault and that is all.
second,write eeprom and do unlock.
if these solution does not work it means your phone as a hardware fault.
hiiiiiii
1- conect fone in the twister box
2- prees conect & brand c100 skyworks
3 - press reset eprom ( reset mmi ) . dont remove battre
4 - tray and removed
power on fone ...... smil :)
hodafone ................
pls what is the solution for pls wait on samsung c100
buschell
01-01-2005, 02:16
just remove c310,c311.that is all
HAPPY NEW YEAR
just remove c310,c311.that is all
HAPPY NEW YEAR
hiiiiiii
this remove error dont **** screen
its remove has bin " key bad error "
dont remov and reset mmi
thanks
hodafone .......................
mohammad2004
01-29-2005, 16:24
to real way for .....:
1-repair sw faults by ust by c100 org cable (go to phone multi color display phone ok)
2-reset mmi by ufs3 box and cable a300 100000000% ok
use the tornado twsiter to flash repair the phone, click on the MMI reset
pls i have a300 charging itself what can i do urgent pls.