View Full Version : x 600 camera preview error
dear all
i have 4 x600 having same problem camera preview error
is there any one who can help me
i have tested them to update flash but no positive response at all
looking for a good discusion :eek:
samanthe
09-30-2004, 16:49
Dear friend ..
.it is noy a software problem...replaced flat cable with new original..be carefull for lcd...I done like this foult ...lot with E700...
good luck :p :D :D :D :D
dear i was talking about x600 and i didnot think that a flat cable can be changed in this model because there are no way to sold or connect the cable with camera except to change the camera and this camera strip or cable dont have the connection with the lcd
any other sugesion dear br :mad: :mad: :mad: :mad:
DrMobile
10-01-2004, 13:13
Change camera is the only solution to repair X600 Camera Preview..
Br.
sony_cky
10-01-2004, 14:29
dear all
i have 4 x600 having same problem camera preview error
is there any one who can help me
i have tested them to update flash but no positive response at all
looking for a good discusion :eek:its not the problem of software.change the connector its 100% working
samanthe
10-02-2004, 12:10
Dear friend if it is not cable,check the connector through mocroscope and re shoulder it or try to changed it..most probably it is ok...
resolder conector......if nothing happens you must to change camera :)
intersoft
10-25-2004, 08:14
resolder connector 100% ok work
hy, i change the flex cable, nothing happend, just preview error, or mi cam see like in infrared, maibe RGB is fault
i change all flex and lcd's into another phone and make the same problem?? camera is fault, i resold all contacts and verify with microscope but all ok. the phone has ben drop from 2 meters. if you have new ideeas is welcome.
best regards :confused:
mohammad2004
11-05-2004, 01:44
1-you sure full eprom and flash by ust pro
2-the replace or change flat cable camera
3-change the camera phone compld
4-test and chech connector board camera
saeed-gsm
11-13-2004, 20:40
this problem is hardware not soft ware--------------------->mohammad2004
GSM SNIPER
11-13-2004, 21:57
You must change a camera !! there is any other way !
I have done this about 10 times and It was well and that is the only solution for this problem !
maxowysz33
11-24-2004, 13:00
How much can the X-600 camera cost?
just change the camera thats the ony way otherwise you are waisting your time
Daanish
i have one camera problem thats the does not save the captured image it shows capature error. i change camara,and do flash no use then i hot the camera ic then its o.k but it will work for only few hours.its not easy to change the camera ic coz its glued.so if any one know the solution for this pls reply
thanks
riadhset
10-23-2005, 23:58
change the camera no more
sheikhje
11-01-2005, 06:41
its camera fault.must change camera.no more salotion