a800 lcd problem

[piedone]

hy guys...i change the flat cable at a800 and big lcd doesn't work ,the small lcd works good ....where is the mistake.....i copied piece by piece....this is not the first flat cable whitch i change, i think i change 5-6 and all that goes wrong....!!!!so can anybody could help me???

thks in advance....

[tolowo]

Guy,do not waist your time in changing the connector,just replace phone with new lcd,and their will be joy.

[piedone]

thks tolowo but this is cheeper i would like to be so easy....but......i'll waiting new replys
brg :)

[vali.rusu]

There are a lot of flatcables wrong manufactured , or made "on the boat" , so if you have those flatcables from the same provider , it's possible to work for a long time and have no result , i Have had same problem too , and i decided to buy flatcables , a little expensive but good quality. Till you will find one that works , you will spend so much money to buy flatcables , till you realize that is cheeper and easyer to replace the entire LCD.
Best regards

[piedone]

yes man u have right....i tried cheeper and expensive flat cable ...but i have the same problem....the big lcd doesn't work.....any ideea?
;)

[mohammad2004]

full eprom and flash by ust

replace 90% flat cable -10% lcd

check the connector board and flat

[ASAFYRY]

almost of flat cable from china and not work good sure that is aflllllllllllllllllllat

[gsm-london]

buy a genuine lcd complete with ribbon - you will not go wrong!

[Mohtech]

Hi

Check this out ...It might help

[pali]

@piedone

did u fixed your problem ?
i have same problem ..
i changed flex but BIG LCD is not working..

Pali

[alireza13165]

i have a sgh-a800 that after water damage no display
i change display and flash it but nit ok
please help me