8110 and 8120

[Florin]

Hello to all
Here is link for 8110 and 8120 cable, this is for all guy who could and want to build that before will be out from factory.

http://moca.gate8.ro/soft/lg/8110_cable.rar

Regards
Moca
support@blazer-team.com

[toukour]

Hello to all
Here is link for 8110 and 8120 cable, this is for all guy who could and want to build that before will be out from factory.

http://moca.gate8.ro/soft/lg/8110_cable.rar

Regards
Moca
support@blazer-team.com

Thank you, Florin It is really nice.
Best regards.

[evan_silbert]

Thank you, Florin and Thank you, Blazer team! :)

[hakima]

Hello to all
Here is link for 8110 and 8120 cable, this is for all guy who could and want to build that before will be out from factory.

http://moca.gate8.ro/soft/lg/8110_cable.rar

Regards
Moca
support@blazer-team.com

Thanks for ur information,mate!!!:)
I hope Blazer new version will be released when I finish build these cables :D
WBR

[LEENO]

What are pin from 1 to 8?

[hakima]

What are pin from 1 to 8?
What do U want to talk about?
Maybe U mean U want to know about pin 1 and pin 8 of E2PROM?
If yes, that mean short 1,2,3,8!!!
That's all!!!
WBR

[LEENO]

I talk about connector on the left, what is?
BR

[evan_silbert]

The RJ45?????????????????????????????

[LEENO]

Yes, where connect rj45?

[evan_silbert]

Yes, where connect rj45?
If you have a new box then it goes right in. Otherwise, you will need an RJ45>Serial adaptor like the one included with the Blazer B@g cables kit. I suppose at that point if you are making your own cable you could build it for serial instead though :)

[xgabe]

About Blazer with DB9 connector...
This is the Blazer correct pinout with DB9 connector:

Pin1. NC.
Pin2. Txd (Blazer -> Phone)
Pin3. Rxd (Blazer <- Phone)
Pin4. Phone_Power
Pin5. GND
Pin6. E2P_SDA (Pin5 E2P)
Pin7. E2P_SCLK (Pin6 E2P)
Pin8. E2P_WP (Pin7 E2P)
Pin9. E2P_VCC (Pin8 E2P)

With this pinout I rebuilt the cable for LG8110.
Tested and works just fine.

B.R. XGabe

[buggy127]

can someone tell me if ver.5.2 can unlock lg u8110

[evan_silbert]

Why not use new version 5.6????

[halongmobile]

where i can find KF33 ? thanks

[xgabe]

@ halongmobile....

You can replace KF33 with National Semiconductors LP2981. It's a 100mA ultra lowdrop regulator in a M5-SMD package. You can find this chip in Ericsson A1018 or GA628/GF688 ... It's marked "L35A"or "L35B" ...

For LP2981 follow this link...
http://www.national.com/pf/LP/LP2981.html

For KF33...
http://www.st.com/stonline/books/ascii/docs/4337.htm

I hope that you can figureout how to modify the cable ...
L35A or L35B is a 3.2V ultra lowdrop regulator... same as KF33 (made by SGS-Thomson)...

B.R. XGabe...

[Raklm]

Who unlocked 8120 vers 102 released date 9 oct 2004 with blazer?


BR
Rak|m

[halongmobile]

@ halongmobile....

You can replace KF33 with National Semiconductors LP2981. It's a 100mA ultra lowdrop regulator in a M5-SMD package. You can find this chip in Ericsson A1018 or GA628/GF688 ... It's marked "L35A"or "L35B" ...

For LP2981 follow this link...
http://www.national.com/pf/LP/LP2981.html

For KF33...
http://www.st.com/stonline/books/ascii/docs/4337.htm

I hope that you can figureout how to modify the cable ...
L35A or L35B is a 3.2V ultra lowdrop regulator... same as KF33 (made by SGS-Thomson)...

B.R. XGabe...
thanks but i can't find epprom 24LC256 where i can find it?

[xgabe]

@ halongmobile...

No need to use 24LC256. The cable works just fine with 24LC128, which you can find it in Sagem 922/912. It's a small chip with 14pin(TSSOP14), marked with L128.It's smaller then the classic 8pin SMD...
The pinout for this kind of chip is like the old one with 8pin, but cut the middle 6pin part of the chip...

8pin...............14pin
1. ------------ 1. A0
2. ------------ 2. A1
3. ------------ 6. A2
4. ------------ 7. GND
5. ------------ 8. SDA
6. ------------ 9. SCLK
7. ------------ 13. WP
8. ------------ 14. VCC


Hope you can figureout the pinout for this kind of chip.
Open the binfile in Ponyprog as 24LC256, then change it to 24LC128 and write it AS 24LC128...

My cable for U81x0 has a L35A from an ERICSSON A1018 and a 24LC128 from a Sagem 922 and works w/o any problem...

B.R. XGabe...

[Raklm]

I will build this cable only if blazer can unlock 8120 new v102

BR
Rak|m

[xgabe]

@ Raklm....

I've done a few U81x0, but I did not found yet one which Blazer couldn't unlock it... Last one I unlocked it monday...

B.R. XGabe...

[jean']

Hello to all
Here is link for 8110 and 8120 cable, this is for all guy who could and want to build that before will be out from factory.

http://moca.gate8.ro/soft/lg/8110_cable.rar

Regards
Moca
support@blazer-team.com

THANK YOU FLORIN ! YOU ARE ALLWAYS A NICE MEN. :)

[pyroz]

RAKLM - blazer cannt unlock 8120 v102 !!!

RASKAL - when you du update ?

br,
pyroz
reseller for Slovakia

[Raklm]

:(

what's new in v102?
changed security? :)

BR
Rak|m

[Raklm]

It can v5.9b with this cable modified with L35A instead KF33

http://forum.gsmhosting.com/vbb/showthread.php?t=171488

BR
Rak|m

[xgabe]

Yeap, it's working just fine. Tested on 3 phones ver.1.02.
B.R. XGabe.