View Full Version : I Give 200 Usd To Who Gives Me Nokia6260 Flash File
I GIVE 200 USD TO WHO GIVES ME NOKIA6260 FLASH FILE,,I NEED VERY URGENTLY...
CONTACT ME ON ICQ OR BY E-MAIL or sms
164343559
info@planettelephone.it
+393355495400
regards
Xavien
Hi Xavien
Still looking for the Nokia 6260 flash file, its large @ 90.66 Mb , do you have a FTP address ? and i will dump it there for you.
B.R
M@RTY
MicrostarGSM®
10-12-2004, 14:44
contact me.
microstar@maxis.net.my
also chinese avaliable
MicrostarGSM®
10-12-2004, 17:54
RM-25 Phone Data Package v.3.0436.0 Installation
================================================== ======
Note: You MUST use Phoenix release 2004.31.1.108 or newer.
See Technical bulletin for more detailed information on user settings
handling with Phoenix v. 2004.31.1.108 !!!
Note: If some earlier version of RM-25 Phone Data Package is already installed,
it must be uninstalled first. (This includes other R&D/PE or EUAF/CH versions)
Close Phoenix before starting uninstallation or installation of Data Package.
Go to Add/Remove Programs in Control Panel, then uninstall RM-25 Phone Data Package.
REQUIREMENTS:
- Phoenix Release 2004.31.1.108 or newer
- Save Settings feature must be DISABLED in FPS-8Flash (parameters menu) before flashing
This installation package includes:
- MCU software release 3.0436.0
- Variant packages (PPM) for MCU software 3.0436.0 English for following variants:
* Alps
* APAC2
* APAC3
* Arabic
* Benelux1
* Brazil Nokia
* Bulgaria
* CIS
* Croatia&Slovenia
* Czech&Slovakia
* Estonia
* EuroA
* France
* Ger_Tur
* Greece
* Hebrew
* Hungary
* Iceland
* Italy
* Latvia
* Lithuania
* LTA Default
* Poland
* Portugal
* Romania
* Russia&Ukraina
* Scandinavia1
* Scandinavia2
* Serbia
* Spain
* Switzerland
* Turkey
* Polkomtel
- RM_25.ini file, that includes
- options used in flashing
- list of settings that can be saved from customer's phone when
updating software
- <product code>.ini files, that define
- names of flash files
- variant packages (language packages and EPOC settings) that belong to each product
- default settings for each product
- SW setting files (Product profiles)
- User interface configuration file for Product Profile tool (RM25_29.ppu )
- Label printing files (600dpi only)
- RM-25.val includes product type specific module information for Faultlogger
- autotune_RM-25.ini allows user to align product's RF part automatically
- RM_25_tunings.ini that specifies some TX Power Level tuning targets for RM-25
- readme_CustomerInfo.txt (this file)
Date: 2004-September-04
Copyright © Nokia Corporation. All rights reserved.
MicrostarGSM®
10-12-2004, 17:55
RM-25 Phone Data Package v.3.0436.0 Installation
================================================== ======
Note: You MUST use Phoenix release 2004.31.1.108 or newer.
See Technical bulletin for more detailed information on user settings
handling with Phoenix v. 2004.31.1.108 !!!
Note: If some earlier version of RM-25 Phone Data Package is already installed,
it must be uninstalled first. (This includes other R&D/PE or EUAF/CH versions)
Close Phoenix before starting uninstallation or installation of Data Package.
Go to Add/Remove Programs in Control Panel, then uninstall RM-25 Phone Data Package.
REQUIREMENTS:
- Phoenix Release 2004.31.1.108 or newer
- Save Settings feature must be DISABLED in FPS-8Flash (parameters menu) before flashing
This installation package includes:
- MCU software release 3.0436.0 Chinese
- Variant packages (PPM) for MCU software 3.0436.0 for following variants:
* APAC2-Chinese
* APAC3-Chinese
* China
* Hong Kong
* Taiwan
- RM_25.ini file, that includes
- options used in flashing
- list of settings that can be saved from customer's phone when
updating software
- <product code>.ini files, that define
- names of flash files
- variant packages (language packages and EPOC settings) that belong to each product
- default settings for each product
- SW setting files (Product profiles)
- User interface configuration file for Product Profile tool (RM25_29.ppu )
- Label printing files (600dpi only)
- RM-25.val includes product type specific module information for Faultlogger
- autotune_RM-25.ini allows user to align product's RF part automatically
- RM_25_tunings.ini that specifies some TX Power Level tuning targets for RM-25
- readme_CustomerInfo.txt (this file)
Date: 2004-September-04
Copyright © Nokia Corporation. All rights reserved.
romanrov
10-15-2004, 11:21
hi! my friend ,if u still looking for the flash file for nokia6260
i must to say ,the only person here!!!!!!!!
contact me :alexkeatingfree@hotmail.com
also MSN
I have a couple of nokia partners accounts up for grabs which gives you direct access to all nokia flash files ext ext.
take care
filipas :)
Xavien has been sorted out with the Flash by me :-)
It is true,,,he give me for free :) :) :D
Thanks Spike...
If someone need the correct pinout only have to ask me,,i give for free.
6260 well done N-BOX dctx13d flash time 1,45 min.
Regards
Xavien
FuriouS TeaM
10-16-2004, 03:26
xavien, please bring me 1 6260 for me. you know where i am :D
BR.
Steve.
Please, upload 6260 firmware on your site
WBR
GsmService.Ru
10-16-2004, 19:42
You can download Nokia 6260 flash file from:
http://gsmforum.ru/showthread.php?s=&postid=2651#post2651
Mayby your have pinout also?
Budu ochen blagodaren :eek:
WBR,
vicra.
OMBOSSMAN
10-17-2004, 20:14
You can download Nokia 6260 flash file from:
http://gsmforum.ru/showthread.php?s=&postid=2651#post2651
thanks for share it but how to upload my phone i use twister and griffin box any solution for upload phone ???
andrew2304
10-17-2004, 21:22
RM-25 Phone Data Package v.3.0436.0 Installation
================================================== ======
Note: You MUST use Phoenix release 2004.31.1.108 or newer.
See Technical bulletin for more detailed information on user settings
handling with Phoenix v. 2004.31.1.108 !!!
Note: If some earlier version of RM-25 Phone Data Package is already installed,
it must be uninstalled first. (This includes other R&D/PE or EUAF/CH versions)
Close Phoenix before starting uninstallation or installation of Data Package.
Go to Add/Remove Programs in Control Panel, then uninstall RM-25 Phone Data Package.
REQUIREMENTS:
- Phoenix Release 2004.31.1.108 or newer
- Save Settings feature must be DISABLED in FPS-8Flash (parameters menu) before flashing
This installation package includes:
- MCU software release 3.0436.0
- Variant packages (PPM) for MCU software 3.0436.0 English for following variants:
* Alps
* APAC2
* APAC3
* Arabic
* Benelux1
* Brazil Nokia
* Bulgaria
* CIS
* Croatia&Slovenia
* Czech&Slovakia
* Estonia
* EuroA
* France
* Ger_Tur
* Greece
* Hebrew
* Hungary
* Iceland
* Italy
* Latvia
* Lithuania
* LTA Default
* Poland
* Portugal
* Romania
* Russia&Ukraina
* Scandinavia1
* Scandinavia2
* Serbia
* Spain
* Switzerland
* Turkey
* Polkomtel
- RM_25.ini file, that includes
- options used in flashing
- list of settings that can be saved from customer's phone when
updating software
- <product code>.ini files, that define
- names of flash files
- variant packages (language packages and EPOC settings) that belong to each product
- default settings for each product
- SW setting files (Product profiles)
- User interface configuration file for Product Profile tool (RM25_29.ppu )
- Label printing files (600dpi only)
- RM-25.val includes product type specific module information for Faultlogger
- autotune_RM-25.ini allows user to align product's RF part automatically
- RM_25_tunings.ini that specifies some TX Power Level tuning targets for RM-25
- readme_CustomerInfo.txt (this file)
Date: 2004-September-04
Copyright © Nokia Corporation. All rights reserved.
Friend, where can i download new Phoenix software?
I no found it in support section (Twister,Griffin).
Br
OMBOSSMAN
10-17-2004, 21:23
ok problem solve upload my twister suite include rm25 ;)
Tapsi Jr
10-18-2004, 11:00
hallo
Can you flash the 6260 via twister without any problem?
Please tell me the pinout.
Thanx in advance
WBR,
Tapsi Jr.
GsmService.Ru
10-18-2004, 11:31
Also, you can dind pinout in this threard :
http://gsmforum.ru/showthread.php?s...d=2651#post2651
Tapsi Jr
10-18-2004, 11:42
Sorry I cant speak russian.
Can you post/insert the pinout picture to here?
WBR,
Tapsi Jr.
OMBOSSMAN
10-18-2004, 11:50
Sorry I cant speak russian.
Can you post/insert the pinout picture to here?
WBR,
Tapsi Jr.
here special thanks to denis
OMBOSSMAN
10-18-2004, 11:55
another pin out here
OMBOSSMAN
10-18-2004, 11:56
phone diagram here................. ;) ;)
Tapsi Jr
10-18-2004, 12:31
Great!
Thanx!
Tapsi Jr.
crash action
10-18-2004, 12:32
You can download Nokia 6260 flash file from:
http://gsmforum.ru/showthread.php?s=&postid=2651#post2651
Sorry, can't read your language on your site, anyway to register to download the package? Thanks :)
OMBOSSMAN
10-18-2004, 12:40
Great!
Thanx!
Tapsi Jr.
n p .................................................. ;)
Tapsi Jr
10-19-2004, 00:01
I make cable but phone not power on with dummy battery.
I use original battery pins to connect BSI, +, - not pinouts.
What do I wrong?
What is the trick?
WBR,
Tapsi Jr.
OMBOSSMAN
10-19-2004, 12:39
I make cable but phone not power on with dummy battery.
I use original battery pins to connect BSI, +, - not pinouts.
What do I wrong?
What is the trick?
WBR,
Tapsi Jr.
here full details not any problem me please post result
note dont forget rename file ;)
Tested&Passed
Thanks, bro.
WBR,
vicra.
OMBOSSMAN
10-20-2004, 21:58
Tested&Passed
Thanks, bro.
WBR,
vicra.
this is easy problem :) :) ;)
Tapsi Jr
10-21-2004, 08:23
here full details not any problem me please post result
note dont forget rename file ;)
Works fine ;)
Thanx friend
WBR,
Tapsi Jr.
RahulGSM
10-21-2004, 22:15
hi
i can give u free
W.B.R.
RAHUL GSM
davidkaj
03-13-2005, 20:46
Hi Andrew I Have A 6260 Was Liquid Damage Icleaned And Reflowed Now Has White Screen Switching Off Can U Please Help
Hello,
I have problem with 6260 , no power on
I can't open file File Type: txt 6260.zip.txt
This is zip or txt file?
Regards
Andrews
@Andrews.
Maaannn you first time Download files from this forum ;-)
Ofcause it is zip, rename it only.
Regards
*AnToS*