View Full Version : Communucation error
I have a problem with Blazer when i want to unlock a c1200.
The box worked fine but now i have always communucation error.
I tryed al versions and use XP and Win 98sec but always the communucation error.
When i power up phone with the soft phone is on for 2 sec than off.
I opened the cable and connector to check the wires but seems ok.
What else can i do to check what the problem is?
I have a problem with Blazer when i want to unlock a c1200.
The box worked fine but now i have always communucation error.
I tryed al versions and use XP and Win 98sec but always the communucation error.
When i power up phone with the soft phone is on for 2 sec than off.
I opened the cable and connector to check the wires but seems ok.
What else can i do to check what the problem is?
Maybe your cable is damaged some how, as you said box work okay before. to make sure it is a cable problem, it is the best to try make another phone and to check it.
I test with cable c and now the box works with a phone.
I check my cable,the box is working.
I post result here.
The problem is in the rj45 connector in the box.
I change the connector and now all is working fine.
The problem is in the rj45 connector in the box.
I change the connector and now all is working fine.
Remco, we talked few days ago about the file wich u uploaded, this file is corrupt, please read again flash 1 and 2 and upload again.
Thanks and best regards,
Raskal
I upload again and wait for your answer.
I Ordered U8110 cable, the box can identify it as cable F U8110 series,
but when i connect it to phone, i always get Communication Error!.
I tried connection without battery, same problem.
I also checked the schematic of cable connector, all is ok!
any help?
Raskal i tried now ver 5.6 and soft still ask for update for a LG-510W.
Is this a special version or is my cable and box not good.
Please advise me what to do.
I Ordered U8110 cable, the box can identify it as cable F U8110 series,
but when i connect it to phone, i always get Communication Error!.
I tried connection without battery, same problem.
I also checked the schematic of cable connector, all is ok!
any help?
I have same problem :(
I even made a new cable by shematic on blazer site, changed connector and again "communication error". :confused:
Any solution, please?