t610 freeze and reboot [Archive]

prasse

10-22-2004, 11:00

t610 ver R6C005 freeze and reboot

I make flash AVR and ARM some version and different versions with DIVlpt5 and SE Fighter, original GDFS area, full GDFS in avr format, T610_TOTAL_GDFS_REBUILD.mdc, rebuild SP area, recalc CRC's, change IMEI, rehot AVR, ARM and flash chips and more and more... but still some - reboot and reboot :(

How to solve this problem?

Thank's!!!

to_deal_with

10-24-2004, 00:49

Read old posts bro
There are many posts with this problem I think

arash111

10-24-2004, 02:31

Reflash AVR and ARM and add new GDFS values (new excisting gdfs files) and problem is solved or otherwise its hardware fault,

GSM MIND

10-24-2004, 04:12

Reflash AVR and ARM and add new GDFS values (new excisting gdfs files) and problem is solved or otherwise its hardware fault,
YES IT IS THE SAME METHOD COS ME FLASH A FEW PHONES BUT ALL HAVE SAME PROBLEM SO DO U KNOW THE PLACE OF HARDWARE FROM WHERE THIS FAULT CAN BE SOLVE:)

REGARDS

GSM MIND
STAND ALONE

prasse

10-24-2004, 19:02

Read old posts bro
There are many posts with this problem I think

I read all old posts with this problem before ask for this and make all solutions, BUT NO SUCCESS!!!!!!!!!!!!

prasse

11-02-2004, 15:24

i tried all... i use setool and full erase gdfs and write backup from good phone, write gdfs full area with t610 uncust. file from laser/merwin... change many avr+arm versions via fighter, div, ufs, crusader, setool, change many gdfs files, make imei rebuilds, crc checks, and many more bull****s...no, no and no!!!

Icaros

11-03-2004, 10:12

i tried all... i use setool and full erase gdfs and write backup from good phone, write gdfs full area with t610 uncust. file from laser/merwin... change many avr+arm versions via fighter, div, ufs, crusader, setool, change many gdfs files, make imei rebuilds, crc checks, and many more bull****s...no, no and no!!!

Try to clean the motherboard from oxidations.Use ultrasonic cleaner and isopropylalcohol.I think you have HW problem not SW!

prasse

11-03-2004, 23:06

Try to clean the motherboard from oxidations.Use ultrasonic cleaner and isopropylalcohol.I think you have HW problem not SW!

i think tooooooooo :(

mohammad2004

11-06-2004, 01:34

you must the full flash avr-arm-gdfs org

full unlock and reset gdfs

clean good board

service the full board hot