Flashing C62

[micka22]

Does anyine can help me to flash C62,
I'm using flash programmer V2.83 cracked, each time i try to flash, after powering on, it displays, flashing failed, the phone doesn't respond;
I tried on many C62, same thing, i tried also to change the voltage of the power supply.... same thing
I have a lot of C62 which needs to be flashed...
My cable is working because i use it to unlock with Zuela's log decrypter...

does any one have any idea ... what thing else should i do to succeed the flashing process... :confused: :confused: :confused:

[bcnboy]

Use the Recovery flash option to flash the phone then flash the firmware you want to flash you have to select it from the root directory and all the options of language and flash will be highlighted in the flasher. if it gives fail flashing, always use the Recovery flash and then flash with your desired firmware but be sure that it should be equal or higher firmware as downgrading is not working good.

regards

bcnboy

[micka22]

Thanks,

I found the solution, i had to chand some settings on the HD0503.ini file

In flash writte mode, instead of 4, i put 3.

Now i can flash correctly

BR

[vish_thakkar786]

sir do you have flash file for c62 if yes can you send it to mobileworld123@rediffmail.com

[Aishur]

sir do you have flash file for c62 if yes can you send it to mobileworld123@rediffmail.com

Hi mates,

A big amount of flashes here http://eh.student.utwente.nl/~landy/C62/

login:mobile
pass:elibom

and don't forget to thank Landy ;)
Best regards,
Aishur

[ldicdican]

thank you very much LANDY! :)

[micka22]

Hi mates,

A big amount of flashes here http://eh.student.utwente.nl/~landy/C62/

login:mobile
pass:elibom

and don't forget to thank Landy ;)
Best regards,
Aishur


Yes... many helpfull flash files... thanks to Landy

[hduc74]

Hi Mates
i have c62, version 16, language 2. i flash it with version 26 ,it said "flashing software fail,block verification failed for block 1, error code 6" and phone die.
plzzzzzzzzzz help me
thanks and best regard

[micka22]

On HD0503.ini; change the flash writte mode setting; change the 4 to 3; sometimes you have to change it to 1 also... working for me

BR

[Aishur]

On HD0503.ini; change the flash writte mode setting; change the 4 to 3; sometimes you have to change it to 1 also... working for me

BR

Hi mates,
I have the same problem as hduc74 one.
I tried also to change HD0503.ini flash write mode setting from 4 to 3,2,1 without any sucess.
Now phone is dead then please how to repair it.

Best regards,
Aishur

[Aishur]

Hi Mates
i have c62, version 16, language 2. i flash it with version 26 ,it said "flashing software fail,block verification failed for block 1, error code 6" and phone die.
plzzzzzzzzzz help me
thanks and best regard


Hi mates,

I experienced same problems as yours.

The problem is due to the external power supply ( thanks fly to bestcool).
For information visit c62 gdfs (http://forum.gsmhosting.com/vbb/showthread.php?goto=newpost&t=164723)

Best regards,
Aishur

[aleshek]

I hope there's no need gdfs area repair.
My experience > only external power supply (9-12v) will solve this problem.

BR
aleshek