FlashProgrammer 2.83 (build 169) modifiaction

[jmrokita]

A little bit modification for this program.
2.83 do not allows to downgrade, but this "cracked" version can update older flash version.

If you don't want change all folder/files flash names (to *000*), or use older version of FlashProgrammer, You might use this version.

If you want do patch yourself You must do this modification (in only 2.83):
Offset: 4A189 (hex)
replace: [0F 84] to [90 E9]
In other version (ex. 2.78) it's probably in other place (0x000443B4), but i don't dissasemble this version, and I don't know this in 100%

(Just unpack, copy this file to your orginal program directory, and run!!! This is only executable file of 2.83)

[hecham0]

i though downgrading gets rejected by the mobile phone not the flasher.... i am gonna give this a shot as soon as i get home... i will let you know how it goes. i have a CF62 with v85 firmware that is being really stubborn

anyone else know other ways to downgrade?

[jmrokita]

i though downgrading gets rejected by the mobile phone not the flasher.... i am gonna give this a shot as soon as i get home... i will let you know how it goes. i have a CF62 with v85 firmware that is being really stubborn

anyone else know other ways to downgrade?

The FlashProgrammer support only C62 Siemens, Xelibri X1 and X8 , not CF62!!!
The C62 is based on Ericsson chipset.

[e2nak]

@ imrokita

when i run program it says that "There are no software releases available in
C:\Program Files\microcell\flash programmer\HD0503-083-M\flash please help
how to configure all files are in flash programmer folder and downloaded at
landys page.

any consideration given to this request will greatly be appreciated.

thanks

e2nak

[jmrokita]

when i run program it says that "There are no software releases available in
C:\Program Files\microcell\flash programmer\HD0503-083-M\flash please help
how to configure all files are in flash programmer folder and downloaded at
landys page.

The HD0503-083-M is V.20 not v83 :)

C:\Program Files\microcell\flash programmer\HD0503-083-M\flash is incorect path.
You must pass only root folder for ex. C:\Program Files\microcell\flash programmer
The FlashProgramm automaticaly detect all of you firmwares in this folder.

Best regards

jmrokita

[drnele]

Hi @jmrokita
I just like Our Forum :)
Tonight I mess with C62 w28 and f*** him.
With ur patch he is alive again.
BIG THANKS .
W.B.R.

[usernome]

* Flash Programmer
* Version 2.83 (Build 169)
* Copyright (C) 2000-2003 Microcell Ltd

Initializing...
Uploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Flashing failed. Starting flashing failed (algorithm header not valid). Please try recovery flash.

What's wrong ?

Thanx !

[FredAmexis]

* Flash Programmer
* Version 2.83 (Build 169)
* Copyright (C) 2000-2003 Microcell Ltd
Initializing...
Uploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Flashing failed. Starting flashing failed (algorithm header not valid). Please try recovery flash.
What's wrong ?
Thanx !


you need to flash it with the menu option "Recovery Flash".. as easy as it gets..

[satcomhedi]

when i run program it says that "There are no software releases available in
C:\Program Files\microcell\flash programmer
please help
how to configure all files are in flash programmer folder and downloaded at
landys page. i'am tired and i will forget this if you d'ont help me to flah this phone

[drnele]

when i run program it says that "There are no software releases available in
C:\Program Files\microcell\flash programmer
please help
how to configure all files are in flash programmer folder and downloaded at
landys page. i'am tired and i will forget this if you d'ont help me to flah this phone
Try this:
In C:\Program Files\microcell\flash programmer > microcell must be used with
large fonts like this: C:\Program Files\MICROCELL\flash programmer .
In folder> flash programmer files must be named like this HD0503-092-M
W.B.R.

[waleed2]

thanks for best help

[Daeron]

Hi
I try to flash with your soft to revive a dead phone...
but i still obtain same error
Flashing software failed. Block verification failed for block 1, error code: 6.

anyone knows how to repair... I try various gdfs repaired but same error always
:S

Thnks and BR

[nctrung_vn]

I'm have prolem.

* Flash Programmer
* Version 2.83 (Build 169)
* Copyright (C) 2000-2003 Microcell Ltd

Initializing...
Uploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Reading information from phone...
Loading software file...
Software file 'HD0503-092-001-M.ssw' loaded.
Loading language file...
Language file 'HD0503-LNG-092-M-91.SSW' loaded.
Loading customization file...
Customization file 'HD0503-FFS-092-M-101.SSW' loaded.
Flashing software...
Flashing software failed. Block verification failed for block 1, error code: 6.


What is prolem with me

[electrosoft]

Hi
you have to do a configuration in HD0503.ini
Flash write mode = 4
im not sure make serch in old post
BR!

[Daeron]

I'm have prolem.

* Flash Programmer
* Version 2.83 (Build 169)
* Copyright (C) 2000-2003 Microcell Ltd

Initializing...
Uploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Reading information from phone...
Loading software file...
Software file 'HD0503-092-001-M.ssw' loaded.
Loading language file...
Language file 'HD0503-LNG-092-M-91.SSW' loaded.
Loading customization file...
Customization file 'HD0503-FFS-092-M-101.SSW' loaded.
Flashing software...
Flashing software failed. Block verification failed for block 1, error code: 6.


What is prolem with me

I have same problem like you.... and i solved it with configuration of HD0503.ini
Search in old post... It's there the solution and fully explained :)
BR

[cora]

guys how about this ive sucessfully flashed using flash programer but when i turned the phone on it just blink and blink........ive tried other flashfiles also...what could be the solution for this,.....pls help

[mirkomit]

Hello Folks! Sorry for my bad englich! I need flash programer for Siemens c62 ("Flash Programmer 2.83" ?). If somebody want post to me, my email is: mirkomit@gmail.com