Error.....

[psxboxmod]

Hi,
the problem is istallation vygis-box, I have download and istalled the driver, bat when I execute the program LG_1_24 I have an error message "registration file REGxxxx.DAT not found".
how I can resolve?
Thanks.

[mohammadmouazen]

hi

must put file regxxxx.dat near program to open program
if not have it contact your resseller


br

[psxboxmod]

Where other I can find it?

[Gobi]

Hi

Your reseller MUST give you this reg file.


best regards,
gobi

[psxboxmod]

My reseller has given a cd-rom to me, bat this cd-rom is breakdown.
My reseller is unlockcellular, bat he does not answer me.
Help me!

[Gobi]

My reseller has given a cd-rom to me, bat this cd-rom is breakdown.
My reseller is unlockcellular, bat he does not answer me.
Help me!

Use the dongle-id reader software in support area to read your dongle id.
If you need any help for this, read here: http://forum.gsmhosting.com/vbb/showthread.php?t=169259

Please send me the Dongle ID ON MY E-mail: gobi@rdsbv.ro

regards,
gobi

[psxboxmod]

Gobi, you have mail!!!
thanks

[UnlockCellular]

Hi, We emailed you already regarding the registration and download the latest file from our site www.unlockcellular.com/forum .

[psxboxmod]

Thanks to Gobi & unlockcellular I make to know you!

[psxboxmod]

Now The software start (thanks to you!!!), bat for unlock LG 8120 the box mast be set on M-BUS or F-BUS?

[SicilianBoy]

and the thing must go to on or off?

[psxboxmod]

LG_1_24 start, press connect button, the phone type is selected, bat UNLOCK button is not available.Why??? :-(

[SicilianBoy]

psxbox ma sei quello del forum italiano?

[psxboxmod]

Help me please!!!!
Thanks :-)

[psxboxmod]

The soft LG_1_24 start,connect phone, press connect button, the phone type is selected, bat UNLOCK button is not available.Why??? :-(

[Gobi]

FIRST: Please read the manual there - it will really help you !!!


- Box settings: SWITCHES ON Fbus and VCC OFF

- Start software, select Port to USB-Vygis and speed 406250 if you have LG U81x0 cable for Vygis box, or select Com1 and speed 115200 if you have serial (com) cable

- Select correct type of phone ( LG-U8120 )
- Connect phone powered OFF
- Press "Connect" BUTTON, then press power on button on the phone, and the software will connect to thew phone.
- Press ''Unlock'' button

That's it !!

regards,
Gobi

[psxboxmod]

I have the unibox usb gold aluminum whit LPT dongle and Lg cable, this cable is connect whit plug connector to unibox.
The box is SWITCHES ON Fbus and VCC OFF
Start software, select Port to USB-Vygis and speed 406250 and I have error message"open usb device by device description - device not present" if select Com1 and speed 115200 the phone switches on automatically

[psxboxmod]

Hi, We emailed you already regarding the registration and download the latest file from our site www.unlockcellular.com/forum .
I do not find the vygistoolbox section :confused:

[UnlockCellular]

Hi, the manual is there http://www.unlockcellular.com/forum/viewtopic.php?t=15 , just need to register. Did you also register at the official site? they also have manual.

[psxboxmod]

Yes I have manual, but I do not find solution :-(

perhaps it is necessary ServicePack1 for WindowsXP?

[psxboxmod]

I do not know what to make...
Help me please.......

[UnlockCellular]

Hi, looks like your installation is not complete or incorrect. Uninstall everything again. This time make sure you INSTALL DRIVER first before connecting the box.

Other than that, I have no idea what is goin on... ??

[Gobi]

Your drivers for the USB-Vygis box are not installed/or not correct installed.

- You find this drivers as rar file in support area. Extract this file on your PC.
Then connect the box, and when it asks for driver, then point it to the location where you have extract the rar file.

This way your driver should be installed now.

- If you still have the problem, then go to ''device manager'' and check the settings/driver for the USB-Vygis box.

regards,
gobi

[psxboxmod]

I have read the manual and section istallation:
- I have istalled the sentinel driver
- I have connected the box on USB port and the system have found the new peripheral "UniUsb Box by Unlockers.net" then I have point it to the location where I have extract the rar file (Vygisoft VSD2XX New Drivers), bat the system does not recognize this driver.
HELP me please!

[Gobi]

You have mail..

regards,
gobi

[psxboxmod]

I have istalled the driver found in www.unlockers.net, the system has accepted this driver, bat when start LG_1_24 and start the button "connect" I have a new error message " access violation at address 005F1A5A in module LG_1_24.exe read of adress 0000003C


:-(((

[psxboxmod]

One problem is resolved, my box is universal box, now I have programmed it in Vygis-Cable. I have istalled the driver, bat when Connect phone powered OFF, automatically it is powered ON, now where is the problem?

[Gobi]

hello,

Do this:

Select correct phone type, press connect, and THEN only connect powered off phone to cable.
(Also check switches on box must be at Fbus and VCC OFF)

regards,
gobi

[psxboxmod]

I have read your instruction, bat the phone power on automatically when I connect it to the box and the software is not connected it. it could be broken?

[psxboxmod]

I have understend where is the problem, I used LG7050 cable instead LG8110 cable, because my reseller has not sended it, I hope he sends me it in the next few days.
Very thanks to Gobi & Unlockcellular (my reseller)

[psxboxmod]

My history with this box does not have aim, my reseller has sended cable to me LG8110, but now when the software tries to connect itself to the telephone arrives to 14% and has the error message "phone not reponde" where is the problem?Thanks

[Gobi]

Check all this;

- Switch to FBus
- Switch to VCC OFF

- select in software right cable settings:
VYgis cable and 406250 FOR Cable connected to Vygis USBbox,
or COM1 and 115200 for Serial Com cable - depends what cable you have..

- Press connect
- connect Powerted OFF phone to cable and press Power on button

Now the software must connect to phone
Press Unlock button and in 1 sec the phone is unlocked

regards,
gobi