View Full Version : Dejan Box
Hi<br />I have programmed Pic 16ce625-04/p<br />The program Dejan 1.4 writes now in the bottom corner Box ID V01,02-5001
The programming means has passed without mistakes?
Yes you are ok 100%<br />Regards<br />Robby
You now PIC 16ce625 is OTP...<br />Why we should have reprogram it twice? (readme.txt : 1) Program blank chip with the new HEX file (Dex1.HEX) <br /> <br />2) Put the chip in place where it'll be working for at least 1 second. <br /> If you use the same board please ensure that the power supply goes to the chip for at <br /> least 1 second. Ideally - put the chip into standard 5V power supply working condition for <br /> PIC (4 - Reset, 5 - GND, 14 - VCC, 16 - 4MHz external clock or crystal between 15&16), <br /> switch power supply ON, Reset PIC, wait 1 second, switch OFF.<br /> At this point the Data memory is programmed.<br />3) Insert chip again into programmer and program it with the Dex0.HEX file. <br /> The programmer will tell you about ERROR for last memory locations - no problem, it's OK. )
I don't understand the readme.txt file in dk.zip.<br />First you program the chip with the HEX file (Dex1.HEX). That I understand<br />But in pkt.2 it says: Put the chip in place where it'll be working for at least 1 second. (Is that the dejan box?).If you use the same board please ensure that the power supply goes to the chip for at <br />least 1 second. Ideally - put the chip into standard 5V power supply working condition for <br />PIC (4 - Reset, 5 - GND, 14 - VCC, 16 - 4MHz external clock or crystal between 15&16), <br />switch power supply ON, Reset PIC, wait 1 second, switch OFF.<br />At this point the Data memory is programmed.
This text i don't understad. (does it mean the programmer?)
Hi<br />At me a problem with BOX<br />I considered complete Flsh from telephone 3210 V6.00 Dejan 1.0 and has renamed it(him) of Flash.bin<br />Has started the program Dejan 1.4 I press F3 and has received the message about<br />to mistake Bad MCU Flash Chksum<br />Too most has made with telephone 3310 V4.45 and there is no message on a mistake<br />I have found Ful Flash 3210 V6,00 on pages of a network started Dejan 1.4 <br />pressing F3 has not informed about a mistake<br />I have made updating and now my telephone is not included any more
In what a problem in clone Box or Dejan 1.4
Where I can find complete and worker Dejan 1.4?
I am sorry for my bad English