Sharp gx20

[filipas]

hi the clip is not unlocking sharp gx20 any ideas

[simplesolutions]

hi the clip is not unlocking sharp gx20 any ideas

hi m8

Gx10,Gx20

Instructions:
1. power on the clip
2. power on the phone
3. connect the phone to clip
4. press unlock button one time, wait until leds are solid and press second time.
5. when the leds are solid second time, remove and put back the phone battery
6.power on the phone- you can see XXXX on scren
7. press 1 ->99->top right button under screen
8. enter 3 for unlock or 1 for security code
9. press top right button again and wait until you can see the message
,,FINISHED-PLEASE ANY KEY,, for gx20 or similar for gx10..
10. press few times top right buton to power off the phone.

best regards

simple solutions

[flyingdoctor]

hi the clip is not unlocking sharp gx20 any ideas
Have you follwed the setting of cable proceedure. Had problems simlar to above in getting it to work, but found following http://forums.fonedoctor.co.uk/showthread.php?t=312 and set cable as in proceedure pointed out. The cable has to be set befor it can unlock. 1. Go into the uni-clip update software 2. press cable settings. 3. A box then comes up select cable type you are ging to use. 4. Press set cable. The lights will then blink quickly. 5. Unplug uni-clip from update cable while lights are still flashing. 6. Then plug in cable you want to use and press the ulock button. The cable is now set.