PIC 16F628

[pavel_novy]

I am trying to build dejan box with PIC 16F628<br />I have hex from MTL<br />when I use 8 mhz crystal - bad box<br />4mhz - flashing work, but mbus commands don't work - calculation after flash, read log,...<br />I try also change oscillator XT to HS<br />Configuration bits I have set correctly like MTL write in readme.<br />I don't where is problem.

Can you help me ?

tnx

Pavel

[GSMWIZARD]

[quote]Originally posted by pavel_novy:<br /><strong>I am trying to build dejan box with PIC 16F628<br />I have hex from MTL<br />when I use 8 mhz crystal - bad box<br />4mhz - flashing work, but mbus commands don't work - calculation after flash, read log,...<br />I try also change oscillator XT to HS<br />Configuration bits I have set correctly like MTL write in readme.<br />I don't where is problem.

Can you help me ?

hi <br />what programmer are you using ?

tnx

Pavel</strong><hr></blockquote>

[pavel_novy]

I bought programmer for all eeprom + all pic with their own software from <a href="http://www.asix.cz," target="_blank">www.asix.cz,</a> it should work ok

[sergioems]

can any one tell me if the pic 16f628 is also necessary to program data memory and if this is made like in pic 16ce625? many thnaks.good work for all!!!!!

[ZzX]

i have same problem its pic16f628 busted. Trust me<br />i tested other pic now good working. <br />How i can busted to pic ? ( : ) lol i try get 25.5 volt to mclr )<br />yes its working only 4mhz pic you what time add up to mhz pic auto down because pic busted <img src="wink.gif" border="0">

[GsmSolution]

Hi,<br />I have test the pic -04(4mhz) and 20ip(20mhz) all work well without any problem.I use 8 mhz crystal.<br />Thanks. <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

[ 21 February 2002: Message edited by: GsmSolution ]</p>