View Full Version : plizz help me E700 start and freezz
I have a E700 that start and freezz in the startup screen I have flashed it with UFS 3 many times and the problem is the same i have trayed with dumper i have download it with dump 16 Mb and flashed it .it's the same :confused:
i dont know what to do excuse me in startup he freezz for 20 second after that it's OFF plizzz help me i don't know it's hard problem or soft problem :(
kelvinlim
12-05-2004, 08:43
Cpu either cold solder or damage
Cpu either cold solder or damage
but it accepte flash bin and tfs flash and enter in tat mod with tornado flasher
e700 problem :( help me all member
This problem has been concidered many times here, friend...
Have You tried to erase whole flash with dumper, before full flashing?
Or to remove backup battery from the PCB for a minute, shorting it on PCB?
Read old posts before opening new threads, please.
BR
This problem has been concidered many times here, friend...
Have You tried to erase whole flash with dumper, before full flashing?
Or to remove backup battery from the PCB for a minute, shorting it on PCB?
Read old posts before opening new threads, please.
BR
but whene I use the damper it give me bout ..erreur ram........ I don't know way and it steelll press power on plizzz tell me the dumper is more efficasse than UFS 3 and the dumper from this http://forum.gsmhosting.com/vbb/showthread.php?t=137100&page=3&pp=15
it's for XP i have readed this thred but it dont work in win XP and inwin 98
I think it's CPU problem sorry i have shorted it on PCB but it stell freez
hamid-max30
12-06-2004, 00:01
hi my ferend
if u conect do it , you must remove the pf ic
if u working in menu ,you must 1)flash orginal 2)flexi memori 3)cheng the ic flash
if this is no up note ,you must cheng cpu and flash egane
hi my ferend
if u conect do it , you must remove the pf ic
if u working in menu ,you must 1)flash orginal 2)flexi memori 3)cheng the ic flash
if this is no up note ,you must cheng cpu and flash egane
think for help you are a good man