Samsung V200 "pause by temperature repair"

[sunnytek]

Hello, please i would like to know how to repair a samsung V200 that automatically stops charging in few seconds, whenever it is placed on charge, and a write-up is displaced - "pause by temperature".

[UnlockingExperts]

i got the same problem with one of the V200 !!!! any solution ?

[florinfr80]

Hello, please i would like to know how to repair a samsung V200 that automatically stops charging in few seconds, whenever it is placed on charge, and a write-up is displaced - "pause by temperature".

I had the same problem. I reflew U101 (near Sim holder) with flux, and I solved the problem. If it didn't work, replace LTRG or P20D.

[sunnytek]

I had the same problem. I reflew U101 (near Sim holder) with flux, and I solved the problem. If it didn't work, replace LTRG or P20D.


Hi,

I do not understand what you meant by :

> Reflew U101 ( near sim holder) with flux, and
> Replace LTRG or P20D.

Please, can you simplify it a bit.

[florinfr80]

Hi,

I do not understand what you meant by :

> Reflew U101 ( near sim holder) with flux, and
> Replace LTRG or P20D.

Please, can you simplify it a bit.
Reflow U101 a circuit near by the sim holder with flux (it is something to make better jonction)
Replace LTRG it is a component with 6 legs near by sim holder... You must know litle bit electronic... Expensive phone.. try on something cheaper

[das100]

rob flux on ic ,press down and heat leg with soldering iron,u may damage if u use workstation ****er

[sunnytek]

Yeah thanks Pal, i've got it!

[cellularry]

U100 and Not U101.
just resolder it and your phone will work 100 %

[segun]

i have solved a ot of pause by temperature all u just have to do is look for the u100 i.c or u101 and apply some plus or solderibg paste on it and u gat ur problems solved
SO FEEL COOL

[abbeydguru]

@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

[abbeydguru]

@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

[gbada]

please how many leg is this u100 ic please tell me

[cellularry]

please how many leg is this u100 ic please tell me
U100 is the IC next to Sim Card. legs are all around. too many

[gbada]

please how do i repair the u 1oo do i use rework station or just soldering iron to reflow it

[cellularry]

please how do i repair the u 1oo do i use rework station or just soldering iron to reflow it
Use soldering iron only. follow all the legs all around the U100

[nofear197979]

reheat the power near simreader

[shawgsm]

can somebody post the schematic diagram for v200. i'm trying to repair v200 post by temparature. all the post here didn't work for me
thanks
sherwin

[mohammad2004]

write the eprom and flash

remove the e61-e62-ltrg-p200

replace the power ic

[cellularry]

i solved too many V200 with the same problem by resoldering U100. i don't know if you are doing it well.

[=CostyGSM=]

rehot U100 and read old posts!!!!!!!!

[shawgsm]

solve my problem already thanks to you guys

[chmatlob]

i solved too many V200 with the same problem by resoldering U100. i don't know if you are doing it well.

I have a C100 showing same pause by temperature problem.Any one have idea how to solve that problem.Thank you........

[alrbee]

try imei rebuild ,,

good luck

[roso]

Guys , i have the same problem with 2 pieces of A800 and one C110. On A800 changing P20D and LTRG not help, but on C110 I put a diode from +charg to main+.

[adomshima]

hi,
guy is good to be more elleborate,and i think i help .
1.the u100 is on the (above) the sim seating ,on the left side of the pcb also the back-up battery is closser to it and its sequare-like with about 21 legs on each side.
2.all u needed to is to place,that is put soldering flux (paste) arround the u100 (legs)
3.with a soldering iron,press this legs (all)to the pcb, this will give good re-soldering.
4.make sure youi are doing this with smoe steady hands, so that you do not solder multiple legs.good luck.

[alrbee]

before doing that try to make imei rebuild ,

regards

[travolta]

Use soldering iron only. follow all the legs all around the U100

i will rather advice he uses a rework station,cos he may brigde the ic if he uses soldering iron.

[BMobile]

x640 help me repair "pause by temperature repair" ?????????????????????

[BMobile]

:confused: x640 help me repair "pause by temperature repair" ????????????????????? :confused: