View Full Version : Solution for ST60 -blocked
Hi @ll
On new version of ST60 bug 11x**00012*00000000# not working.
After that when u tipe correct code phone not accept code .Some ppl flash phone and solve problem but that`s hard way.
Solution is easy:
Just clean user area with Milano Backup Tool 4.11 and then tipe correct codes.[if u have it]
This is my solution and work 100% , tested by me.
W.B.R.
Where I can find this software? Milano tool?
http://eh.student.utwente.nl/~landy/ (mobile; elibom)
W.B.R.
thank you,
I reset my ST60, but the code dont work, and I canot flash this phone.
Maybe new version. From Norway
Hi
This solution also remove phone code on ST60 and ST55
W.B.R.
Thanks, gotta test this method later today or tomorrow when i get the phone from my friend.
BadBoyZa
12-15-2004, 15:45
any instruction or equipment needed for this solution?
I have d/l backup tool
what i need to do next?
i need to get cable?
I also d/l flasher ...
my phone is blocked ... with that code (**00012*00000000#)
please instruct me to do
ihsanali
12-15-2004, 17:46
my fone is also blocked and code does not work
any instruction or equipment needed for this solution?
I have d/l backup tool
what i need to do next?
i need to get cable?
I also d/l flasher ...
my phone is blocked ... with that code (**00012*00000000#)
please instruct me to do
1.Install Milano Backup Tool 4.11
2.Use data cable [RS232 for ST55/ST60] and clean user area
3.Tipe correct codes **00012*xxxxxxxx#
4. :cool:
W.B.R.
Hi @ll
On new version of ST60 bug 11x**00012*00000000# not working.
After that when u tipe correct code phone not accept code .Some ppl flash phone and solve problem but that`s hard way.
Solution is easy:
Just clean user area with Milano Backup Tool 4.11 and then tipe correct codes.[if u have it]
This is my solution and work 100% , tested by me.
W.B.R.
And the correct code. Do I get it in this forum?
McHenggah
12-20-2004, 21:16
What program calculates correct codes to siemens st60?
the_frightener
12-20-2004, 21:23
Hi
This solution also remove phone code on ST60 and ST55
W.B.R.
Hi m8 !
kindly tell me how can i unlock ST60 with this solution :confused: plz explain it step by step ...
Big thx in adv
This is solution when u tipe 11x**00012*00000000# and n o t u n l o c k phone [in that case ur phone is blocked and not accept correct code]
W.B.R.
Hi m8 !
kindly tell me how can i unlock ST60 with this solution plz explain it step by step ...
Big thx in adv
-----------------------------------------
its easy reflash phone with lover version and try that code (**00012*00000000#)11 times phone unlocked
hello
just FULL FLASH WITH UNBRANDED FLASH FILE FROM LANDY PAGE.
IT WORKS.
regards
kaiser
www.kaiserelectronics.net
the_frightener
12-21-2004, 07:53
hello
just FULL FLASH WITH UNBRANDED FLASH FILE FROM LANDY PAGE.
IT WORKS.
regards
kaiser
www.kaiserelectronics.net
Hi Bro, thx for the reply but kindly tell me the link from where i can get the full flash for ST60 & also plz guide me step by step how i'm gona flash it ?
Thx in adv
Rahuman28
12-22-2004, 11:39
I used Milano Downloader v4.11 ,read the flash file and saved 3mb but during time of uploading errornously I have selected the "system file" and the phone end up with a blank white screen.
Could someone give me only the System Filew read from Milano or some clue to reactivate the phone please.
Is theres any possibility to full flash the phone to bring it back to the original position as the re writing of the 3mb do not switch on the phone. I hope that the full flash should be more than 3mb one. Further how could the *.mbf flash could be written???
WBR
Siemens man
12-27-2004, 07:01
hi guys
i have same problem with new st60 from norway. how to unlock this phone??????????
thanks
when i run the flasher .. it says.. "list out of bonds(0)"
what prob is this..
br
Siemens man
12-27-2004, 18:13
hi man
i have same problem
when i run the flasher .. it says.. "list out of bonds(0)"
what prob is this..
br
is it a computer prob or s.w. is not perfactly installed... though its not in the installable format....but just the files extarcted in a directory
br
DeDo Gsm1911
12-27-2004, 19:06
no work with me ....
use win98
use full backup!!!!
work 100%
BadBoyZa
12-29-2004, 06:23
i've got usb cable with driver and milano software
how to flash?? help!!!
i have flash the phone with flash file on the landy page.. but the pone is still locked...
i did flash it 2 time with the same results...
phone is still locked...
br
gsmbase.de
12-29-2004, 14:27
Tested today by me with ST55 and F-bus cable with extenal power (5volt) or old unibox work too!
100%work for me ;)
BR Piotrek
undergrass
12-30-2004, 00:33
Where can I find this site the Milano backup tools 4.41?
Where can I find this site the Milano backup tools 4.41?
You must read topic careful and u`ll find URL for site.
W.B.R.
hi man
i have same problem
When start the program be conected to the internet and will works 100%, tested by me.
:)
SKAS_2002
12-30-2004, 20:03
Confirming: I use milano SWITCH tool 4.11 to unlock s55/st60 /any kind of locks/. St60 afterwards I have to reflash with blank firmware. All of this has been on Landys site for a year or so :D.
Btw these softs for some reason do not work with my usb cables.
Reg
Oleg
BadBoyZa
01-29-2005, 09:57
I had bought a USB cable for st55-st60 and I use that milano program
but it seem that the software could not found it's connection
so .... is the cable is good or ..... what?
Try with COM cable RS232 .
B.R.
BadBoyZa
03-02-2005, 09:21
so it is not working with my USB cable?
now i need to buy cable RS232 ?
and it will be working, right?
i am not a technician ... i have been to many mobile repair shop in bangkok
but nobody can fix my st60 ... :(
br
Hanukkah
06-06-2005, 17:34
so it is not working with my USB cable?
now i need to buy cable RS232 ?
and it will be working, right?
i am not a technician ... i have been to many mobile repair shop in bangkok
but nobody can fix my st60 ... :(
br
Why? What happened to your ST60?
descovery
06-06-2005, 17:55
link not work
i can't download sw
br
descovery