help in sl45i black list patch

[lazioroma]

how to use black list patch

[misko903]

in S45i blacklist:

in adressbook you have a item named "Post Code". to this field write D - to drop user with this post code, B to make your phone busy (only this user ;) A - autoanswer him and S - to silent - doesnt ring and vibra.

have a fun ;)

Antoine [KNet]

[naransula]

for sl45 version 50 options D, B, A and S is not available :( i have used the entry point provided by Lalo for autoanswer but i did not work.

[lalo.lerry]

I found that EP by fw similarities between S45i and SL45, but I couldn't test it, it could be wrong (but I think it is 99.99% correct).
BTW, it is for SL45i v56 only!

[Tr0nAd0r]

pls post the full SL45i patch in here

[naransula]

@Lalo: sorry i meant sl45 version 56 :)

here is the patch that i employed (i only replace the entry point for reject call with Lalo's accept call A2DE24);

; *** blacklist v0.1 ***
;Firmware : sl45v56
;Author : ntcn
;Created : Aug 30, 2004

;I haven't SL45i for test it, but it must work correctly


0x27E930: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC4DD4EC040088E046FE45003D0CD740
0x27E940: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 0C00F2F16C3247F261002D0347F24100
0x27E950: FFFFFFFFFFFFFFFFFFFF 3D02DAA2DE2498E0DB00

0x030E9A: DC4DD4EC0400 CC00DAC730E9

;in the post code you should have "A" for auto answer

[lalo.lerry]

The patch is right, but you should still use "x" or "X" as code for autoanswer.
I'm going to implement this patch for you, now.
Bye

Lalo

[lalo.lerry]

;BLACKLIST for SL45v56:
;implemented by Lalo

;A or a as post-code for autoanswer
;B or b as post-code for busy
;R or r as post-code for reject (or blacklist)
;S or s as post-code for silent (or Mute)

0x030E9A: DC4DD4EC0400 CC00DAC700E9

0x27E900: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC4DD4EC040088E046FE45003D28D740
0x27E910: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 0C00F2F16C3247F241002D1647F26100
0x27E920: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 2D1347F242002D1347F262002D1047F2
0x27E930: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 52002D1047F272002D0D47F253002D0D
0x27E940: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 47F273002D0A0D0BDAA2DE240D08DAA2
0x27E950: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF A4DE0D05DAA248DE0D02DAA25CDF98E0
0x27E960: FFFF DB00



;please test it and tell me if I have to relocate it (and where)
;then I'll pubblish it in the patches thread
;Bye

Lalo

[naransula]

@Lalo: thanks for the patch :) auto-answer does not work but other options are working very good. in silent mode phone shuts down? is it normal? in auto-answer mode phone locks and then shuts down.

it would be better if you place your patch between the following addresses;

0x27DD90 - 0x27DDFF

Naransula

[lalo.lerry]

No, it's not normal.
Probably wrong EPs (or better, missing same register settings).
I'll correct and post new version in the afternoon
Bye

[Tr0nAd0r]

Good work Lalo, im searching help to make the patch for automake a call when change the profile

[lalo.lerry]

;BLACKLIST for SL45v56:
;implemented by Lalo

;A or a as post-code for autoanswer
;B or b as post-code for busy
;R or r as post-code for reject (or blacklist)
;S or s as post-code for silent (or Mute)

0x030E9A: DC4DD4EC0400 CC00DAC700E9

0x27E900: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC4DD4EC040088E046FE45003D28D740
0x27E910: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 0C00F2F16C3247F241002D1647F26100
0x27E920: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 2D1347F242002D1347F262002D1047F2
0x27E930: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 52002D1047F272002D0D47F253002D0D
0x27E940: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 47F273002D0A0D0BDAA224DE0D08DAA2
0x27E950: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF A4DE0D05DAA248DE0D02DAA25CDF98E0
0x27E960: FFFF DB00


;autoanswer bug should be corrected, now working on silence one

[lalo.lerry]

mmmh... silence call seems not bugged.
But if it is, try to apply this correction patch:
27E95C: 5C 60

Waitng for reports...

[naransula]

@Lalo: for auto-answer mode there is no problem with 24DE :) but silence mode still does not work :( i think i solved the problem partially :) the first part of problem is associated with "S" and "s" which is also used by assign rign tone to different numbers. when i use "S" and "s", phone shuts down. instead i used "M" and "m" respectively and this time phone did not shut down but there were no changes in ringing of the phone. what is the expectation from the silence mode?

thanks,


Naransula

[lalo.lerry]

Ahhhhh... probably the silence call is good, but conflict with some previously applied patches, first of all AAA one.
So, probably the work is good if no other AAAlike patch is applied.
Can you post me these AAAlike patches, so I solve the conflict?
Thanks


Silence mode= stop ringing and vibrating without ending incoming call

[naransula]

i have the ones available on the forum but i think the problem stems from the entry point. let me clarify the aaa patches that i have put into my phone :) my full-flash is fully customized :confused:

[lalo.lerry]

Checked Silent call: 100% right.
Problem was due to the use of letter S, which is used also by AAA patch.
This is the final (I hope) version, relocated:

;A or a as post-code for Autoanswer
;B or b as post-code for Busy
;M or m as post-code for don't ringing and vibrating (or Mute)
;R or r as post-code for Reject (or blacklist)



0x030E9A: DC4DD4EC0400 CC00DAC790DD

0x27DD90: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC4DD4EC040088E046FE45003D28D740
0x27DDA0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 0C00F2F16C3247F241002D1647F26100
0x27DDB0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 2D1347F242002D1347F262002D1047F2
0x27DDC0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 4D002D1047F26D002D0D47F252002D0D
0x27DDD0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 47F272002D0A0D0BDAA224DE0D08DAA2
0x27DDE0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF A4DE0D05DAA25CDF0D02DAA248DE98E0
0x27DDF0: FFFF DB00


Please post reports
Bye

Lalo

[Red_Fox_]

M is not still working(((
And these patch conflict with these one...
;*** IAC. Increase addressbook Capacity from 500 to 800 V1 ***

;Firmware : SL45v56
;Author : coollang
;Release : July 30, 2004

;this patch would increase addressbook capacity from 500 to 800.
;It work fine at phone and others by AT Command
;please backup your addressbook before apply this
;I has test 1000, it is faild, i think reason is no more heap memory.

;about addressbook manager
0x013DD0: FE01 2A03 ;32Ah = 810d, = count+10
0x016C42: FE01 2A03

0x017770: F401 2003 ;320h = 800d
0x017832: F401 2003
0x01783A: F401 2003

0x020ABE: F401 2003
0x020E6A: F401 2003

0x021FDA: F401 2003
0x021FE0: F401 2003
0x022010: F401 2003

0x022120: F401 2003
0x022126: F401 2003
0x022156: F401 2003

;-----------------
;about AT command
0x097816: F401 2003


;about heap memory
0x1294E:D507 850C ;C85h = 3205d about 7F02.adr =count*4+5
0x13118:D507 850C
0x1340E:D507 850C
0x1A11A:D507 850C
0x1A5E6:D507 850C
0x200F6:D507 850C

0x12A34:8E17 9E25 ;259Eh = 9630d about 9F02.adr =count*12+30
0x13492:8E17 9E25
0x16974:8E17 9E25
0x200EA:8E17 9E25

[lalo.lerry]

About Silent EP:
Sorry, I really cannot debug it without checking with phone, hope another patcher could menage it.
I can only cancel that option, if nobody solve it.
Can anybody check with Debugger the effect of call:
A2DF5C: SilentCall
when phone is ringing?

About patch conflict:
really really strange.
Routines seem not related in any way.
Was the not relocated version in conflict, also?
Did anybody else experience it?

[Red_Fox_]

With addressbook Capacity 800 patch is working.... only once...
And then MMC error...

[vizionar]

Great patch! Thanks!
But silence (mute) mode still doesn't work, ar least in my phone. I've got some patches installed but there was no conflict while installing this one, and I've uninstalled Loadable ringtones patch.
What is AAA patch? Is there any other patch this may be incompatible with? Shouldn't there be an error message when applying patch if there is some conflict in addresses?

[lazioroma]

good job thank you lalo.lerry

[charlielao]

@lalo
Thank you for the great patch. The Mute doesnt work. Also, when postcode is set to BUSY, the caller still can hear ONE ring and then a busy tone just like in the REJETED postcode. I hope you can fix this so that the caller will not hear a RINGTONE before the BUSY tone, because the caller will think that you have rejected the incoming call :)

[lalo.lerry]

@all:
thanks for compliment, but I've only improuved a ntcn patch, nothing more.
About MUTE problem:
It is not easy to correct and sorry, I'm not able to fix it without phone, so I'll not be the man who fix it.
About BUSY problem:
I'm afraid that the first heared ring is not deletable.
This is due to the time CPU spend to associate the incoming call number to phonebook entries and to check the patch routine.
I'll make some experiments on S45i...