A65 dead after interupt SWUP Flash

[kiril101]

I change LP with siemens SWUP but phone is dead after interupt on 2%
Did somebody know how to flash with frea.I read another A65 firmware like C60 and write to dead phone and unlock too, but the phone is not power on.
Any solution?

[ziko]

Try again with SWUP, but check SKIP on Pre-Check


Ziko

[kiril101]

I already try but "bootcore not detected"

[gecata]

Try to cut TestPoint as C60 or MC60 and write fubu. Then unlock with freia15 as c60.

[Tifon]

Please where can i get the picture, cause i see the mobo a little different.

[ball3]

THIS (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=7481) is the picture i used for cutting testpoint on my A65 with infineon chip.Works like a charm.You might also wanna do a search and read previous posts on this topic.

[kiril101]

I have one who work and I read flash with frea like C60 from 0x200000 and write to dead phone and unlock(phone already cut) everything without any errors but the phone not power up

[pepos]

I I have so that same problem ,there has been anyhow solution. :confused:

[pepos]

Please about assistance in solution problem to deaden A65 :confused:

FREIA - Engine build 15, Frontend build 11
COMM_LoadBoots : selected phone family is 13
TTY_OpenCOMPort : opening Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.02
COMM_LoadBoots : EEPROM IMEI is 35449200146727
COMM_LoadBoots : original IMEI is 35449200146727 (locked)
COMM_LoadBoots : found SIEMENS C60 lgX vff (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - FFFF :confused:
COMM_LoadBoots : phone ids are 9AC67CBE [00000000] :confused:
COMM_UpdateIMEIBlocks : original IMEI is locked
O.K.

[zab4o]

If you have working phone , try to read full flash from it , choose M55 and read flash - about 14mb, then choose M55 boot and read flash too- about 2mb. Connect your dead phone to the cabel and choose M55 boot in frea and write flash, then choose M55 and write flash , and then ..... unlock it.
This solution works for me.
Hopes to help you.
BR Zab4o

[pepos]

Thanks for tip I will try and give know :)

[pepos]

:) Big thanks.Your solution to have been 100% functional. ;)

[codec_romania]

i have a problem

i have a dead a65

i have flashed it like you said with files read as m55 and m55 boot from a good a65 and after i flashed it, phone powers up for a second and then buzzzzz

now i tried to unlock it and says eeprom imei is corrupt

what can i do please

SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI
COMM_LoadBoots : EEPROM IMEI (17) is corrupt
COMM_LoadBoots : original IMEI is 35449200120466 (locked)
COMM_LoadBoots : found SIEMENS A65 lg95 v5 (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201
COMM_LoadBoots : phone ids are 368776CD [368776CD]
COMM_UpdateIMEIBlocks : update is not accepted
TTY_CloseCOMPort : Closing UFS2

ps i did not write eeprom as well ... i wrote only files from an a65 ( as m55 and m55boot ) like somebody wrote here.

many thanks in advance

mihai
mihai@codectelecom.com

[santaeufemia]

I have the same problem :(

[zab4o]

Try to unlock it as C60.

[aaaaaaaa]

hi friends
i kill one a65 with cracked sst v5.31
i cut test point and flashing this phone with full flash
now fone is dead
hellp me please

[codec_romania]

If you have working phone , try to read full flash from it , choose M55 and read flash - about 14mb, then choose M55 boot and read flash too- about 2mb. Connect your dead phone to the cabel and choose M55 boot in frea and write flash, then choose M55 and write flash , and then ..... unlock it.

thanks to Zab4o - this is his solution but i used it and works

also if you need files just mail me and i ll send them to you

regards

mihai

[aaaaaaaa]

thanks codec romania and Zab4o

[dexter2]

@ codec romania
pls send me flashes for A65, cos i dont have a working one and i really need to do this phone'
regards dexter:

[fadhel]

for "codecromania" try to unlock it without use "use origim imei" .
1-direct unlock without saving map .
2-ok

and all will be ok