PDA

View Full Version : MW3026 simlocked without simcard

ataman
12-12-2004, 13:51
Please help me to repair this.

this is data from phone :
0 : 083A05973825646764
191 : 6D4EDC2A
5250 : 6D061055175DA4E9336088FDC0E334F474C5DD246D9E4B5892 37432D
5251 : 5F3905B86F5C32D53A17
5252 : 673945B80E4C4CF37B6A
5253 : B2B595BF6A1DBF36DCA8202A370A04726240F13FFABE49F7C4 9C7852D051EE2D284DF3B7D255316C
5254 : 92C610A3D3995A359C7E92386561
5255 : 6F609638D2D2A29048
5256 : 92C610A3D3995A359C7E92386561
5257 : 6EBDE4C216084448FF8A74
5258 : 6D39DC2A17DE9EC29B87
5259 : 79BBD28C4BC456A800
5260 : EB3DE6BEE5EFCF429D33




PHONE ID : F1C07AD76FC8



Thanks in advance!
ardagul
12-13-2004, 08:25
these values no enought to solve this problem put your backup with sagem doctor option 2
ataman
12-13-2004, 10:32
this is eeprom readed with SagDoctor
ardagul
12-13-2004, 11:59
16141 wrong put this value in 16141 : FFFFF7FC7EFF
185 also wrong correct value 185 : FFFFF7FC7EFF
268 wrong correct value 268: 0000
5709 wrong 5709: 9EE37D09
ataman
12-13-2004, 18:37
a lot of thanks!!!
now my phone working!
GSM_MARSHALS
12-17-2004, 17:39
i have ma rc 820 i tried many actions to unlock it ,but just says "sim protect" this is the eeprom , please help
ardagul
12-18-2004, 14:09
use sagem doctor and correct checksum ,read old post for this; very good information can find this.
GSM_MARSHALS
12-20-2004, 16:26
ok ardagul , i have tried to correct checksums with sag doc 1.4c+(9xx series)
i choose to use default lock values , but phone still tell (protect sim)
i think i need good unlocked eeprom for this r 810 ra29c , not ? :)
ardagul
12-20-2004, 16:40
ok ardagul , i have tried to correct checksums with sag doc 1.4c+(9xx series)
i choose to use default lock values , but phone still tell (protect sim)
i think i need good unlocked eeprom for this r 810 ra29c , not ? :)

no you must select manual lock and put for level 00

You must search in forum but I put it


1. Use Sagem Doktor
2. Set baudrate 4800
3. Press '5' - edit eeprom field
field 191, 251, 252, 253 - fill 00, 00, 00 ....

4. Press '9' - verify checksumm

5.1 For field 191 - press 2 (standart value)
5.2 For field 251 - press 3 (enter 00)
5.3 For field 252 - press 2 (standart value)
5.3 For field 253 - Most interesting !!!
perss 3, enter values from field 211 + "01 00 " - total 8 bytes


1. Use Sagem Doktor
2. Set baudrate 4800
3. Press '5' - edit eeprom field
field 191, 251, 252, 253 - fill 00, 00, 00 ....

4. Press '9' - verify checksumm

5.1 For field 191 - press 2 (standart value)
5.2 For field 251 - press 3 (enter 00)
5.3 For field 252 - press 2 (standart value)
5.3 For field 253 - Most interesting !!!
perss 3, enter values from field 211 + "01 00 " - total 8 bytes


regards