MAD USB Cable DCA-540 + CX65 : everything is impossible...

[PYCON]

Hi all... I've great problems with my CX65 & Usb original cable 540...

1) often when I plug the cable into the phone and I type *#06# I can see at the end of second page "plugged in DCA-540". :cool: Other tymes instead, when I plug the cable, on the top of display the cell shows "TTY" and in *#06# it only show "plugged in". :confused: The first case, I've on my Windows ME 2 devices, one USB device and a Siemens Usb Modem ( virtual COM4 ). :) In the second case, I've only a USB device but I cannot find a correct driver fot this... :mad: When the cell shows TTY, there isn't a virtual COM, so no program can work...

2) I downloaded CX65_250100_xbz_tool.exe from my-siemens.com, when my phone says "plugged in DCA-540" the exe give me an error of "type 505". When phone says only "plugged in", the tool says "no COM4". :eek:

3) Fortunately I've been able to patch the bootcore with the Chaos midlet... ok. :cool: But now, when I try to use V_Klay or X65Flasher and I try to clock on "connect" of the program... my computer freezeeeeee!!! :confused: if the phone says "plugged in DCA-540" and it's on. When the phone is off or it says only "plugged in" with TTY, the programs cannot find the virtual COM... :(

[PYCON]

Up
:(

[anuroj_007]

@ PYCON

Change cable to DCA-510,it works fine

Edit

and you may find this comment from Siemens official :)

http://www.siemens-mobile.com/com.aperto/MySiemens/Files/Specials/hq/cx65_upgrade/howto_cx65_update.html

[PYCON]

So my cable is s_h_i_t ... :(

[PYCON]

up
:(

[microera]

Hi!
I need ORIGINAL USB CABLE DRIVER for Siemens phone!
is this OK:
http://drivers.softpedia.com/progDownload/BenqSiemens-Data-Cable-USB-DCA-Download-16761.html


my cable (like this):
http://3gnewsroom.mobiles.co.uk/accessory-DCA510.html

Please for 100% good cable driver!!

p.s.
Original Siemens sites are dead! :(

[microera]

I have note on Siemens USB cable:
S30880-S5601-A810
Which cable driver?!?

[dagos]

I have note on Siemens USB cable:
S30880-S5601-A810
Which cable driver?!?

Hi,
it is possible to have Prolific chipset PL-2303 inside.
Try with the Prolific drivers:

http://www.prolific.com.tw/eng/downloads.asp?ID=31

or download from:
http://www.munich-handy.de/usb-kabel_treiber.zip

Br,
dagos

[dagos]

I have note on Siemens USB cable:
S30880-S5601-A810
Which cable driver?!?

Hi (again),
to identify your chipset adapter, go to http://www.handy-faq.de/forum/showthread.php?t=10 and read instruction (in the german language).

Br,
dagos

[microera]

Hi @dagos THANKS for usefull info!
But I install today at morning (before reading your poste):
Prolific chipset PL-2303 inside
and M65 is recognized .... and after starting SWUP updating ... M65 is switched offf but flashing with SWUP don't start!!
similar message " ... ? not received from phone...." occure!
?

I will test tommorow again on another computer if I have time .... propably at night! :) I will poste results here!!

[phone U like]

i need chemin cable usb siemens help my pleeeeeeeeeeeease

[dagos]

i need chemin cable usb siemens help my pleeeeeeeeeeeease

...sorry, I understood!
chemin (french) = route;way (english).
What you need, USB cable schematic?
confused
Br,
dagos