SST 5.31 - Which phone and version tested?

[fingusio]

Hi

Please post here only which phone with witch version you unlock?
I today tested on C65 v12 work perfect!!

best regards from Poland
fingusio

[flechazo]

i have new version for SST cracked work for m55 mc60 c60 a60 c65 tested by me

ReGards ..SuDDa

[japunlock]

can you upload that soft plz

[fingusio]

I upload soft on www.fingusio.neostrada.pl/SST.rar . I stay it about 2days.

There is SST 5.31, Winhex 11.6 + keygen. Work perfect this version!!

br.
fingusio

[andrew2304]

CX65 ver 25 unlock 100% with ver.5.3.2
Br ;)

[mg70brz]

I upload soft on www.fingusio.neostrada.pl/SST.rar . I stay it about 2days.

There is SST 5.31, Winhex 11.6 + keygen. Work perfect this version!!

br.
fingusio


file is corrupted ! upload again !

[moni108]

can someone be kind enough to explain how you enter the security key, tried many times :(

[fingusio]

@mg70brz

file work perfect! Im and my friend download and extract works 100%

br.
fingusio

[gjurobrod]

Q:

can someone be kind enough to explain how you enter the security key, tried many times :(

A:

Run installed sst
write your Hardware fingerprint
Run sst again
leave it on first dilog box
open winhex
open ram and find sst (second)
chose entire memory
let supose that you HWP is 7CFA-A28B
reverse it will be 8BA2FA7C
push ctrl+alt+h insert yor key (ex my key 8BA2FA7C) insert 6C65B750
replace all
close winhex
insert this
Nume: flavius
key: NYZH0Y-F5P6RQ-NGMUQ1-JV6V8B-QCQTT8-288HN3-D8F735-9BDZ54

and...

If it isn´t working for you,try to install 5.20 (uninstall 5.32 first) and use this procedure to register it.

After that just install 5.32,worked for me..

Wbr gjurobrod


So,hope it´s clear now...

Wbr gjurobrod

[moni108]

Q:



A:



and...




So,hope it´s clear now...

Wbr gjurobrod

i thank you for your time, took me a few goes but all is well, merci. :)

[beli_the_king]

i can only download 65 kb and nothing more

[GsmHgvnl]

Ctrl + Alt + H

doesn't work :S:S

[yui]

work perfect with not killed phone!!!

[syciu]

I tested on C65 V25. I killed it with Eeprom Tools V 3.15 (save all option) and repair with SST 5.32 by write eeprom and unlock! Everything works fine for me!

[OCTOPUS d.o.o.]

C60 v27????????????

B.R.

[yui]

if you cannot access in servise mode,do not repair tested!!!!

[ImpactPL]

C60 v27????????????

B.R.

Hi, I tested, work 100%

[japunlock]

how can i unlock c60 v27 i couldnt even with this tool

[wgozd_poland]

HI. Where i find sst v532 cracked????

THX for any HELP!

BEST R. wgozd_poland

[ImpactPL]

how can i unlock c60 v27 i couldnt even with this tool

Make testpoint like old C60

[KRIZA]

cv65v12 ok but v16 cant bot.

[Siemens man]

hi man
not working. i'm cut old test point and use sst soft. tell me
full solution
thanks
Make testpoint like old C60

[Mobile Master Pk]

good works man thanks for all

[ImpactPL]

hi man
not working. i'm cut old test point and use sst soft. tell me
full solution
thanks

Believe me! Its working.
I have been cuted testpoint like old C60 and make unlock in SST.
Try to change "Boot mode" to Normal or Testpoint.

BR
Impact

[kranegsm]

Working!

Thanks goes to fingusio ;)

Marry Christmas everybody,
KraneGSM.

[ProfiTel]

http://eh.student.utwente.nl/~landy/Tools(unlock,flashers,etc)/SST_5.31_unprotect.zip

br
Deki ProfiTel

[balal_boss]

iam tested work c65 v15 good unlock

[Siemens man]

hi guys
nice working.ulocked c60v27 cracked soft sst v5.31 (uprotected) download from: unlockeasy.com
thanks

[Lider_1]

Yes, unlock all version is very good!
But I read FF C60 v.16 (AMD)(work), then load this FF in C60 v.14 (AMD)(work too)!
After loading the information, serviceable phone appeared dead!
Not clear, to what addresses of have been loaded FF and why volume 16 Mb?

[menintest]

Hi.

C65 V16 OK
C65v V15 Versión 27/08/2004 O.K, V15 7/09/2004 dont work :eek:


Bro.

[beli_the_king]

i have DEAD c65 v12, killed with eeprom tool
how can i repair it with SST
pls hlp

THX

[beli_the_king]

OK i have fiexed it
REPAIR DEAD C65 V12 (only UNLOCK button executed) work 100%

[esp256]

hi

tested : SST 5.31

C6V V15 27/08/2004 O.K
C6V V15 19/09/2004 not work
C6V V15 24-10-2004 not work

73.

_GSM_

[dickwredniak]

if CTRL+ALT+H (Repalce Hex Values) not work U select Options > Edit mode and click Default Edit Mode or In-Place Mode...
I tested SST 5.31 on many C65 v12, C60 v20/v23 (with TP)...

[Crumarix1]

only one question: for new models..x65, did i need patch botcore with midlet or prog did it itself ?

[dickwredniak]

today i unlock CF62T v85 (with TP) from T-Mobile... After unlock phone says "Insert sim" (three others simcard from Era, Idea, T-Mobile)... When i write backup eeprom phone says "Insert sim"...How to repair?

[gecata]

You cut too deep. Search in formu have solution for repairing phone from this state.

[dickwredniak]

that's right... i cut too deep Where is the solution? I don' see... Is it: http://people.itu.int/~emartine/Tes...simCardJump.GIF ? Thanx!

OK, this solution is good :)

[beli_the_king]

i had today two siemens one is c65 v16 and other is s65 v08
ill tred first legias x65 tool at first i turn on the phone and when plug in cable it turns of it self
and tried sst ,when sst shows "power on" i push the button but nothing hapens

[GORAN_CRO]

i had today two siemens one is c65 v16 and other is s65 v08
ill tred first legias x65 tool at first i turn on the phone and when plug in cable it turns of it self
and tried sst ,when sst shows "power on" i push the button but nothing hapens


i have same prob ... and i solve this !!!

1. power ON phone
2. pres "unlock"
3. plug in cable
4 - if phone turns OFF keep pressing power buton on phone.
- if phone not turns OFF, you must power OFF and keep presing power buton on phone - that's it !!!

[OMBOSSMAN]

sx1 v10 repair and full flash upload cx65 unlock work perfect

[beli_the_king]

i have now tried on C65v12 works 100%
after that i get one cv65 (c6v) v15 when turned on plug on cable it turns off by itself
WHY ???
have somebudy an idea

[tccat1]

i have now tried on C65v12 works 100%
after that i get one cv65 (c6v) v15 when turned on plug on cable it turns off by itself
WHY ???
have somebudy an idea
just back up your phone the make a map file from imei num and phone id then upload your map file 4 blocks this will do the trick

[beli_the_king]

i tried this
does not work
i have unlocked 12 phones with legias soft since monday
and 8 phones with SST v5,31 since jesterday
but with 3 phones no luck
i cant connect it with any soft
:(

[beli_the_king]

i have now tried with SIMSIM emulator on usb cable and i can read phone when sim is emulated
but when need to go in service mode
not posible

[beli_the_king]

can the soft be secured or somethin else

[beli_the_king]

after patching boot core with midlet and readeing full flash i had over 400 faults

[fingusio]

C65 v12 from O2 dosent work with Legija and SST 5.31.
When plug cable phone turns off.
In Legija have message "Reading data failed" , in SST when connect press unlock and red button in phone dosent happend.

br.
fingusio

[beli_the_king]

@ fingusio
i had the same problem
only solution is upload java midlet > execute
read full flash edit in HEX
upload
read FSN
make LOG file
create MAP from LOG
upload MAP with EEPROM tool
finito the phone ulocked

ONLY WAY (i have tried all solutions)
you can alos try only to run the midlet
after thah legijas soft nac read the phone
and calculate AC
but when you need to start the phone in SERVICE MODE
that is imposible

[fingusio]

@beli_the_king
Very thnx for solution but i recieve phone. And I wait for free solution or buy after Christmas GSMKEY:))

ps. Merry Christmas :)

br.
fingusio

[ednacell]

@beli_the_king
Very thnx for solution but i recieve phone. And I wait for free solution or buy after Christmas GSMKEY:))

ps. Merry Christmas :)

br.
fingusio
Here is a solution there are many others in this forum.
http://people.itu.int/~emartine/Unlockx65ed1.zip

[needi]

Well i have just repaired A57 killed by freia 100% with SST.what a software for siemens.

[BesTCooL]

Only upload Full C55 flash ;)

[ozcom]

I got 1 C65 v4 from O2 dead after using eepromTools.I have try to fix it using suggestion gather from the forum but still no luck
-Unlocking or Repair using SST5.31 crack version when press repair or unlock fone goes to service mode wait a few mins remove batterie press power on simlock data write success but fone still "tizzz" and dead
-Same with X65 legija soft -->>Map write OK still "tizzz" and dead
-Try to restore the backup eeprom made with eepromTools here also no luck only Block 0076 write successfully and other Block 5008-5009-5077 write error.
any suggestion will be mostly appreciated please.

[Olsenrye]

Hi, I tested,c65 v12 work 100%
cx65 v12 cant boot use sst v532

[yaren]

I unlocked Cv65 v06 and its works 100%
Regards

[simlockman1]

i need read full flash file M55 v11 thanks you

[beli_the_king]

Here is a solution there are many others in this forum.
http://people.itu.int/~emartine/Unlockx65ed1.zip

let me explane
to unlock x65 phone with this solution the phone needs to be POWERED ON and then TURNED ON pluged on the cable, after thah read codes and ..........
but how to read codes when the phone automaticly turns OFF itself when pluged on cable and also does not go in SERVICE MODE

[beli_the_king]

NEEEEEEEEEEEEEEEEEED HELP

I have SST 5.31 Cracked

and now when i rud it
it says

"This version of SST is old.Please Update SST"

[Olsenrye]

NEEEEEEEEEEEEEEEEEED HELP

I have SST 5.31 Cracked

and now when i rud it
it says

"This version of SST is old.Please Update SST"
If you like to use this tool buy itand get suport and update 100 us is cheap for a tool like that

[ziko]

Hi,

Today I tried first time x65 with carcked SST but when I press start and press power button, nothing happend.
Is it work or not, and what is procedure?

Ziko

[DJRose]

I unlocked Cv65 v15 and its works 100%
Regards

[ziko]

But when soft say Phone ON I press button but nothing happend (sometimes goes in service mode)
Cable is OK, I use it with freia ...

Ziko

[beli_the_king]

@ziko
when the phone goes in service mode wait one minute
then remove battery and put in again
and press power button for less then one second