The only free solution to unlock Sagem MyV 55

[florinfr80]

This operation it is not for beginners, juniors or rookies!!!!

I will explain step by step. Works 100%

1. You must heat the flash IC of Sagem MyV 55, from 150 to 400 degree for about 10 minutes, but you must rise temperature progressive until you can pull it out from the black resin, or if you a solution which dissolve resin you can use it. At this point be very careful how you can get it out the flash with out destroy it.

2. You must heat and unsolder the flash from a Nokia 3310.

3. In place of Nokia 3310 flash put the Sagem flash that you unsoldered in the first place

4. After you soldered the Sagem flash on the Nokia 3310 DO NO TRY TO POWER ON THE PHONE, IT WON’T POWER ON!!!

5. Read the flash with Dejan or any other equipment that can read all 3310 Nokia flash.

6. You will have a bin file that you will save on your HDD.

7. Unsolder the Sagem flash from Nokia phone and put it back to Sagem phone. THE PHONE MUST WORK AGAIN!!!

8. Open the bin file with any bin editor (I used Winhex) and read field 0, 22 and the… that you will need for calculate the unlock code with any sagem calculator.

The code you get it is the unlock code.



It’s working 100000% but very difficult - 3 hour operation.



THIS IS WORKING ONLY IN MyV 55 ONLY!!!! SAGEM MYX 5-2 it has different flash inside.

[lypen17]

hehehe this is solution like DEAD PANASONIC GD 87 and in the end of all this 3 hours work u have a dead phones forever and for what for max 20euro heheh :):) anyone tasted this post result here friends asap...

[florinfr80]

and i revive gd 87 too, and gd67 too, and for you to know i made more than on phone. And regridn money i have been payd with 50euro for Sagem My V55 unlocked.

[needi]

Well there is another easy way to destroy the phone.Just buy or borrow a big hammer from someone .....put on floor in good position and hit it with full power as u can....thats all phone is free from all locks.:):):):):)

[florinfr80]

Well there is another easy way to destroy the phone.Just buy or borrow a big hammer from someone .....put on floor in good position and hit it with full power as u can....thats all phone is free from all locks.:):):):):)
I don't understand why are you sarcastic, because this is a solution, yes it is a hard one, but it is a solution, give one better, and then i exapect to be sarcastic until then.... nobody has given any solution with SAGEM myv 55.
so.....

[Bomber]

ok , i'll call mc Guyver , he will do the job :)
lol

[lyon_service]

Buna Florin
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx?


Please English !!

bR

[Headmade]

Respect each other men, may somebody test the solution before doing some blablabla, or hehehehe?

[humb11luis]

GOOD JOB MEN!!!!
it´s is difficult but i´m willing to try.
don´t mater with other because they like easy solutions.
but when they are in trouble they CRY!!!!!!!!!!!!!!!!!!!!!

[mitek]

Hi
You never know where and when :)
New SAGMASTER Product is on the way wait with patient, don't be so rush what have to come it will come.

best regards Mitek SAGMASTER TEAM

[huricane]

Hi MItek will sagmaster team take into consideration sagmaster owners most of whom are not too happy with the current product.

[gsmsupport.net]

Hi
You never know where and when :)
New SAGMASTER Product is on the way wait with patient, don't be so rush what have to come it will come.

best regards Mitek SAGMASTER TEAM


Don't you think that we have waited too much time already?

[abdoune]

I haven't test this solution posted by Florinfr80 but anyway Thanks Florinfr80 and happy christmas for you :)
Salam

[Ghlamellah]

@abdoune
we'll test this solution 10 years after the day we'll cut correctly our CF62 test point
hehehe

[choulilobert]

This operation it is not for beginners, juniors or rookies!!!!

I will explain step by step. Works 100%

1. You must heat the flash IC of Sagem MyV 55, from 150 to 400 degree for about 10 minutes, but you must rise temperature progressive until you can pull it out from the black resin, or if you a solution which dissolve resin you can use it. At this point be very careful how you can get it out the flash with out destroy it.

2. You must heat and unsolder the flash from a Nokia 3310.

3. In place of Nokia 3310 flash put the Sagem flash that you unsoldered in the first place

4. After you soldered the Sagem flash on the Nokia 3310 DO NO TRY TO POWER ON THE PHONE, IT WON’T POWER ON!!!

5. Read the flash with Dejan or any other equipment that can read all 3310 Nokia flash.

6. You will have a bin file that you will save on your HDD.

7. Unsolder the Sagem flash from Nokia phone and put it back to Sagem phone. THE PHONE MUST WORK AGAIN!!!

8. Open the bin file with any bin editor (I used Winhex) and read field 0, 22 and the… that you will need for calculate the unlock code with any sagem calculator.

The code you get it is the unlock code.



It’s working 100000% but very difficult - 3 hour operation.



THIS IS WORKING ONLY IN MyV 55 ONLY!!!! SAGEM MYX 5-2 it has different flash inside.




woooooooooooo,thank u very much my friend, i have looked for the unlocking method for myv55 for a long time. wonderful, is it english?
br :D

[ihsanali]

thankis for this method i will try and post result

[blaiseid]

This operation it is not for beginners, juniors or rookies!!!!

I will explain step by step. Works 100%

1. You must heat the flash IC of Sagem MyV 55, from 150 to 400 degree for about 10 minutes, but you must rise temperature progressive until you can pull it out from the black resin, or if you a solution which dissolve resin you can use it. At this point be very careful how you can get it out the flash with out destroy it.

2. You must heat and unsolder the flash from a Nokia 3310.

3. In place of Nokia 3310 flash put the Sagem flash that you unsoldered in the first place

4. After you soldered the Sagem flash on the Nokia 3310 DO NO TRY TO POWER ON THE PHONE, IT WON?T POWER ON!!!

5. Read the flash with Dejan or any other equipment that can read all 3310 Nokia flash.

6. You will have a bin file that you will save on your HDD.

7. Unsolder the Sagem flash from Nokia phone and put it back to Sagem phone. THE PHONE MUST WORK AGAIN!!!

8. Open the bin file with any bin editor (I used Winhex) and read field 0, 22 and the? that you will need for calculate the unlock code with any sagem calculator.

The code you get it is the unlock code.



It?s working 100000% but very difficult - 3 hour operation.



THIS IS WORKING ONLY IN MyV 55 ONLY!!!! SAGEM MYX 5-2 it has different flash inside.





Very understandable solution, need a try.

Will post if i ve one.I will make a video also. succeed or fail.

Salam

[halongmobile]

oh good good.thanks

[florinfr80]

who want to give it a try read this and other posts with removing glued UEM, it is the same procedure to remove flash from sagem, and it is a post that shows you step by step in the nokia section, but i couldn't find it in this moment. i will search it and put it here for help.

http://forum.gsmhosting.com/vbb/showthread.php?t=157093&highlight=uem

[Alinus]

nice sollution.
hard work but profs romanians are verry inventive :)

Good Job !

[Oxo_Boxo]

:))

This is theoretically idea.......but in practice is very dangerously, and mostly uselessly.

Don't lose u time (and money) to try it......just go to professional.
He can unlock u phone without dangerous actions .

BR

[mtony969]

:))

This is theoretically idea.......but in practice is very dangerously, and mostly uselessly.

Don't lose u time (and money) to try it......just go to professional.
He can unlock u phone without dangerous actions .

BR


DONT DOWNLOAD FILE FROM YAHOO IT IS SUB SEVEN VIRUS #
FREEE UNLOCK MYV55

[Aishur]

Hi mates,

@florinfr80

I have not the Mc Gyver habillity but I thank you very much anyways.
I think too our defeat is due to the no co-operation in the few last months by cause of some market races.

Cheers,
Aishur

[firas_af]

hi
good work florinfr80
thanx

[..::COZEC::..]

@ florin80


This is a very promising solution,it is better than no solution at all.

CAN SOMEBODY EXPLAIN HOW I CAN GET SOLUTION TO DISSOLVE RESIN SO THAT I CAN REMOVE FLASH IC WITHOUT HEATING?
THANKS.

[DeDo Gsm1911]

thanx very much .. but this is bad for phone .. it maybe not work after return flash ic to phone again :)

[DeDo Gsm1911]

we must wait and wait and wait solution beter than this solution ..

[gsmlab4u]

hi florin fr80 its working "good work", suppose u having quty for exp:500pcs then wht u wil do. hw many pcs u can do a day. anyway we appcating u.

best regards
gsmlab4u

[garutech]

men this is another serious solution for the ingenious ones .

;)

[abbeydguru]

i apreciate Florin's effort in providing temporary solutions to Sagem V55.
But trying out this solutions is a bit dangerous. I believe in next few months there will be permanent solutions to this problem.

[Mr.Fl@sher]

and with fields wht to use calc codes ? and wht exactly the needed fields

[valibuzauro]

this is a theoretic solution stolen from me!
first...I cut my d**k and give to ducks if you read flash in nokia 3310 pcb :D
second...doesnt know where are maped fields needed in flash file... :D
third...florinfr80 know about this from a friend of mine...
fourth...a lot of "click" person in this group that wait solutions and then 1 euro
unlock myv55
ps.I unlock myv55 with this method! :D
ps2.gues where are fields maped in flash :D
ps3. Best regards to All!

vali

[abbeydguru]

do you agreed with solution. Your friend have the solution and refuse to share. So all credit still goes to Florin.

[valibuzauro]

I am not interested in "credit"... :D
I know what I KNOW...
best regards
Vali

[Oxo_Boxo]

I am not interested in "credit"... :D
I know what I KNOW...
best regards
Vali
Why u need field(s) ....can u explain clear ?;)


BR

[florinfr80]

i apreciate Florin's effort in providing temporary solutions to Sagem V55.
But trying out this solutions is a bit dangerous. I believe in next few months there will be permanent solutions to this problem.
i hope so, but my solution it is a desperate solution:)

[florinfr80]

hi florin fr80 its working "good work", suppose u having quty for exp:500pcs then wht u wil do. hw many pcs u can do a day. anyway we appcating u.

best regards
gsmlab4u
i ask for this operation 50 euro, if you give 40euro per piece i will make all 500 pieces:) Worth ...:)

[florinfr80]

this is a theoretic solution stolen from me!
first...I cut my d**k and give to ducks if you read flash in nokia 3310 pcb :D
second...doesnt know where are maped fields needed in flash file... :D
third...florinfr80 know about this from a friend of mine...
fourth...a lot of "click" person in this group that wait solutions and then 1 euro
unlock myv55
ps.I unlock myv55 with this method! :D
ps2.gues where are fields maped in flash :D
ps3. Best regards to All!

vali
I just find out a rumor and test it and post results, so why are you upset about this. I give to all a working solution, Have you ever used free solution of the forum? i think, yes. Do you use freia for Siemens, i think yes, So why are you so upset? if you want something to tell me, i expect a private conversation. Everybody who read the .bin file i helped to get the fields right.

What have i done wrong?

[MichieMax]

Thats a very nice solution i will give it a test when i get the phone coz to me remove chips is as easy as 123
BR
Shadow27

[zied-gsm]

thank you for your effort and i respect such comportement.
we are here to understand and to help us and not to simply critic members.
and we can often see that people who are the first to make critics never help others memebers ..........................
ziedgsm ;)

[valibuzauro]

:D
we all need a picture with myv55 unlocked by florinfr80
:D
best regards
Vali

[..::Neo::..]

unlocking by imei is much better

[florinfr80]

:D
we all need a picture with myv55 unlocked by florinfr80
:D
best regards
Vali
I find out that you are the one who developed this solution, and how I told you privatly i will say it here again: I just test it and put it here, without your agreement because i didn't know to whom all the credit goes.

This solution works 100%% and all the credit goes to Vali, Buzau, Romania.

@valibuzauro
Tommorow i have another phone to unlock and i will make for you speccially a picture.:) as a Christmas gift.

[rgs]

Hi to all

First, Vali don't make stupid post here with "this is a theoretic solution stolen from me!"
This ideea is "stolen" from Panasonic gd87 repair... so stop with stupid post!
Second, again bul***t "gues where are fields maped in flash"... see what oxo_boxo ask u... if u are smart enough u know is not need..
Third, more easy without soldering flash in nk 3310... labtool etc

Sorry, but i can't stay and see all this b***t without comments...

[vladutstoian]

I will try the solution today and I will post the rezult I hope dont kill the phone after operation I will post the solution wish me goodluck :))

[s4sajii]

can i use any other phone bin file in case of flash ic damaged...while unsoldering from v55..?
br

[Dafageni]

I'm Sorry, but I thought that the reason for us being members of this forum was to teach and learn. I Read the first page of this thread and I disagree with the sarcastic karakter of some users. I think florinfr80 is very gullable to share this sollution with all of us. I'm not willing to try it though, but I am glad that there are people that share there sollutions. Because the forum would be nothing without them. florinfr80 I have lots of respect for you. Keep up the good work.

[Own]

@ all
Myv-55 contain :
ic power = ptwl3016B2
cpu = D751685AGZA
flash rom= M49000004 AMD
made in China and big size more flash 3310?????
but have one chip = sp66
82er ...what's this[small chip]
if you bring flash [M49000004AGZA] place in 3310 ....not enought space for put in it.
br
Own :confused: :confused: :D

[Alkapone]

I can test this already, but cant find flash to fit into 3310, I think it's 5210 or 8210 or 2100 ... cant understand nothing, and sagem is v-55. And need more info about fields, and calc ...

B.R.
Alkapone

[Own]

him told all about tried flashing with 3310 ......but ic big more
in Myv-55 used new CPU at D751685AGZA [symmetry as CPU by Acer : e365 = D751774 , E360 = D7419798GHH etc]i think may be v-55 change firmware[same LG 8120 version 101 different version 102...]
br
Own :eek: :eek: :D
sorry for my oppinion may be wrong but i hope sw unlock Myv-55 exit[i had 3 phone on hand]
thank for florinfr80 for made some idea with programmer

[Aishur]

Hi mates,

@florinfr80

Please can you post anywhere your readed bin file.
I agree with Own, thank you for your idea with programmer.
you deserve a Scootish barrel of W* and one kilo of h* ;)
Merry Christmas and Happy new year to all

Best regards,
Aishur

[FractalizeR]

Hmm... Sagem engeniers were so stupid to store unencrypted fields in flash? Or the fields, encrypted with an old algo? BTW, never opened V55, does it really have 2Mb flash inside?

Somebody tested this solution?

[asmax1]

Ghm, by the way, flash reading is useles until the algorith will be known

[Alkapone]

Hmm, realy interesting, or there are few v-55 sagem modifications or mine is a miracle ... there are no 2 Mb flash chip inside, no nothing, tomorow I will post photos from mine v-55, and you will see. Just flash chip like 5210. And in hardware difference from x5-2 just one chip, that at this time I dont know what he does in that 'stupid phone'.

B.R.
Alkapone

[abbeydguru]

i urged all to collectively team up to find suitable solution to V55. I strongly believe the solution for it will come very soon.

[Aishur]

Ghm, by the way, flash reading is useles until the algorith will be known

hi mates,

As said FractalizeR and florin, the classic calc are useful (same story as field 0, crypted and uncrypted fields and Phone Id, hashtable). by the way the sagem engineers are so stupid. As they say en French language: ecrasez une mouche par un marteau.(to crush a fly with a hammer)

best regards,
Aishur

[lader]

;) yes is very goooood ?????????????, :confused:

[florinfr80]

http://www.gsmbox.ro/forum/viewtopic.php?t=188 fro romanian

www.alfamobil.ro (http://www.alfamobil.ro) has imei solution as inn topic

[vladutstoian]

I dont try the solution but I am ready to do this if florin post here the all solution with expanation and all I need but I m shure he can make that beacouse is just presumstions not a tested solution

[gsmdreams]

I have tried the solution and as I write now I see only fumes coming out of the phone but whoever came up with solution thanks for being kind enough to help me kill my phone...........F***k

[BB-gsm]

If you want to "unlock" your phone that way....and u are newbie(don`t know how to do it)...
send them to me and I`ll F*ck them up....with my heavy hammer! :D

(Skit :D ) Hehe!

BR ;)

[asmax1]

stop ****ing brains!
this is fake!

[florinfr80]

In this picture i show you a flash from Sagem My V55. Who is not a rookie will know what kind of flash it is and what kind of phone has the same pinout on the flash.
I rest my case. Please close thsi topic. I opened want it close.

All my respect to my friend Vali Buzau Romania who helped me a lot.Thank you.

Best regards to all.

[abbeydguru]

anyway, no proven solutions for this phone yet?

[taopheek]

what a solution, how many of this fluke can one do in a day?

[simlockman1]

florin80fr thanks you make you solution not working ????

[buqki]

I can do it but it takes you some money

[teccim]

Works. Not for noobs. Solution also found on a russian site, dunno who really invented it. Checked out with a v55 from Voda, Spain. Do not BS that guy - if u got a better solution - post it.

[adihack]

Wow !! Photo of desoldered flash chip is beatiful ;) But maybe better is to look iniside to Technical Documentation ;) Is somebody can plase resold this chip to other phone and try to read content. But I think there is problem because this flash chip contain security area what can't be readed ...

[simlockman1]

Please Myv55 flash read softwware info maybe knok problem last opsion phone open cecksum problem i need read good working software Laptool 48 Advantec read ok 0.22 id read after sagem id calculator problem id i have for test 3 pcs sahem myv55 to buy Nederland vodafone phone i need open solution unlock code and open solution for new software make person money to win please contac simlockman

[soft@man]

hi alll
solustion is works ( sagem my-V55).
I tsst 5 unlocker 100000%%%% works
merci

[ber747]

hi alll
solustion is works ( sagem my-V55).
I tsst 5 unlocker 100000%%%% works
merci
Can you post the solution.? I'm interested. If not yet free, please contact me. email add: b_domingo747@yahoo.ca

[simlockman1]

hi alll
solustion is works ( sagem my-V55).
I tsst 5 unlocker 100000%%%% works
merci


Please flash read software send me mail simlockman@simlockman.com

[adihack]

Not to e-mail !! Everybody need this flash ! Plase put it there !

[abbeydguru]

can you make the details of this flash public.

[florinfr80]

can you make the details of this flash public.


from my friend Vali Buzau Romania

http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31022.pdf


:)

[abbeydguru]

ok...thanks i will check and give you feedback.

[bad_signal]

i think thos is good soulation
but it so hard to do
u must be dreamey man in mobile fix to do that soulation
i wouldn't do that soulation