View Full Version : 6230 life timer reset ?
hi,
how to reset life timer on 6230 ?
i flashed the phone,
full factory reset ... all ....
still the same life timer
any idea ?
maybe with some PM ... ?
b.r.
ALexandar.
You can downgrade.
It can be set to zero till v3.17
But if You upgrade again, lifetimer will apear again.
BR
usernome
12-29-2004, 18:58
Or you can use GRIFFIN .
I have an idea, but i am not sure it would work...didn't tested it yet..
1. Backup full PM from phone with NZ lifetimer
2. Use pm2rpl to make RPL with flash IMEI data
3. Write full PM from new phone
4. Write RPL (from 2) to restore IMEI
pm2rpl prog. is somewhere here, i downloaded it few days ago :p
SpaXa
yes reflash with mcu+ppm
timer will be zero
but is that any solution without full flashing to solve this prob
because life timer is in eeprom
@spaxa
ur suggestion is good but send us software may be it will work
tigertrn
05-21-2005, 14:16
No, flashing mcu+ppm will not reset the life timer of 6230. I think he may be reset by doing what ReviveR or spaxa say. I'm tested full flash mcu+ppm. it is not working.
@tigertrn
i sucess many set convert to zero timer through flashing mcu+ppm
and i need other solution to make zero timer
Use Twister box and flash only with MCU file. But
MCU must be the same version like PPM file.
Best regards
Hehe (c) Crew
Last answer was the best... ;)
ReviveR is right but you can downgrade just some versions....with v5.24 and v5.26 you will have CS i tryed yesterday with one 6230 every firmware and full factory and PM and nothing.....with lower versions you can do it.... :(
Regards
Mackie
Hy
This solutiotion worked for me 100% with twister :
1. Make backup of full pm from a phone with the desired lifetime timer
2. Write that pm to phone
3. Aply all ui settings
4. Restart phone in normal mode
If this won't help you, try to erase whole flash, flash phone with desired mcu,ppm,cnt, restart phone, write pm from phone with the disered lifetime timer, apply all ui settings including simlock reset, restart phone.
regards
there is much shorter way...
erasing whole flash just for lifetimer reset is lame :-)
GSM_LORD
05-24-2005, 15:21
there is much shorter way...
erasing whole flash just for lifetimer reset is lame :-)
I tried that way and it work ok
Writing whole PM will clear lifetime...but...writing entire PM from other phone
will also transfer it's IMEI displayed on *#927..blabla...and thus make even zero lifetime suspicious with this modified s/n...only thing we need is exact location of pm record holding lifetime...with hope that this record is not holding ALL data displayed on *#92702689#....
Did someone tryed partial owerwriting of PM-hunting location of lifetime??
usernome
05-28-2005, 15:28
@dsimka
there is much shorter way...
erasing whole flash just for lifetimer reset is lame :-)
HOWWWWWWWWWWWW ??????????????????
THANX !