View Full Version : does anyone finaly have working USB drvers????
Platijet
12-28-2004, 12:40
so many threads so many drivers but this drivers not working for win98 3G nec unlocker.
can anyone atach here drivers for 616 313 and 228 for win98??
(please test them first and then atach)
gsminstructor
12-28-2004, 13:04
The USB cable is for 3G NEC - 228 , 313 , 616
This is the drivers for new NEC phones.
When you switch on the phone Windows will ask for usb drivers.
You have drivers for 228, 313, 616 in the zip file.
Every time when you start windows it load the drivers. When you start
the unlocker and connect the phone to the pc you will see a little
delay - the reason is because windows load the drivers.
You have to follow very strictly the instructions of the program. The
program will show you when to connect the cable and when to disconnect
it, when to put the battery and when to remove it, etc...
Test the drivers first before run the software. Follow these steps:
1. Find one 228 one 313 and one 616
2. Connect the phone to the cable - it must be switched on
3. Install the drivers
4. When the installation for all drivers finished:
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
4.4. Few seconds later the display must be blue and to have this text:
A:
C:
blue(color not text)
blue(color not text)
blue(color not text)
.
.
.
blue(color not text)
616v: the test mode display on the e616v appears on the
small outer display and not the inside screen.
5. If you can't see this you must start again with drivers installation.
Without these drivers the program can't work.
If you have not this result(4.4.) you can't use the program
http://www.gsminstructor.com/ftp/filesforusb98_oem.zip
gsminstructor
12-28-2004, 13:19
Here you can found more NEC drivers :
ftp://gsminstructor.com
username : gsmcity
password : member
dou mean that we put these drivers in the system directory and that's it?
if so it still doesn't work
OK, now is everything clear, but how I can downgrade flash if I have nec e616v v22?
Best Regards
Komarus
You cant downgrade as yet, the solution is not free at least till now. Also, the flash for the 616 does not work with the 616v...
Here you can found more NEC drivers :
ftp://gsminstructor.com
username : gsmcity
password : member
Somebody has erased them? :confused:
Platijet
12-28-2004, 17:44
Somebody has erased them? :confused:
for e228 excist but i still can't install drivers.
when i connect cable to pc it regognize the "e228 nec" but when i give path to the folder with this drivers i get the message:"windows was unable to locatea driver for this device"
p.s.:i'm using original GX30 USB cable
Siemens man
12-28-2004, 21:28
hi guys
link not work. need other link. i can't enter this site.
thank you
Here you can found more NEC drivers :
ftp://gsminstructor.com
username : gsmcity
password : member
Siemens man
12-28-2004, 21:31
hi guys
link not work. need other link. i can't enter this site.
thank youHere you can found more NEC drivers :
ftp://gsminstructor.com
username : gsmcity
password : member
shakeelajmal
12-28-2004, 21:55
link is working just downloaded drivers for e228 for win98
The USB cable is for 3G NEC - 228 , 313 , 616
This is the drivers for new NEC phones.
When you switch on the phone Windows will ask for usb drivers.
You have drivers for 228, 313, 616 in the zip file.
Every time when you start windows it load the drivers. When you start
the unlocker and connect the phone to the pc you will see a little
delay - the reason is because windows load the drivers.
You have to follow very strictly the instructions of the program. The
program will show you when to connect the cable and when to disconnect
it, when to put the battery and when to remove it, etc...
Test the drivers first before run the software. Follow these steps:
1. Find one 228 one 313 and one 616
2. Connect the phone to the cable - it must be switched on
3. Install the drivers
4. When the installation for all drivers finished:
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
4.4. Few seconds later the display must be blue and to have this text:
A:
C:
blue(color not text)
blue(color not text)
blue(color not text)
.
.
.
blue(color not text)
616v: the test mode display on the e616v appears on the
small outer display and not the inside screen.
5. If you can't see this you must start again with drivers installation.
Without these drivers the program can't work.
If you have not this result(4.4.) you can't use the program
http://www.gsminstructor.com/ftp/filesforusb98_oem.zip
Well first of all thanks for this crack and such a detail usage instructions. I have tried this software on 2 Computers and without new installation of windows98 it is working very fine. People are facing problems in finding the drivers and installation of drivers. Please download the file from the link below which contains the dirvers for NEC 228, 313 and 616 and the cable modification pic. I have installed these drivers and modified the cable and it is working very fine and smooth.
http://www.geocities.com/xtrememobiles/nec3g.zip
The USB cable is for 3G NEC - 228 , 313 , 616
This is the drivers for new NEC phones.
When you switch on the phone Windows will ask for usb drivers.
You have drivers for 228, 313, 616 in the zip file.
Every time when you start windows it load the drivers. When you start
the unlocker and connect the phone to the pc you will see a little
delay - the reason is because windows load the drivers.
You have to follow very strictly the instructions of the program. The
program will show you when to connect the cable and when to disconnect
it, when to put the battery and when to remove it, etc...
Test the drivers first before run the software. Follow these steps:
1. Find one 228 one 313 and one 616
2. Connect the phone to the cable - it must be switched on
3. Install the drivers
4. When the installation for all drivers finished:
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
4.4. Few seconds later the display must be blue and to have this text:
A:
C:
blue(color not text)
blue(color not text)
blue(color not text)
.
.
.
blue(color not text)
616v: the test mode display on the e616v appears on the
small outer display and not the inside screen.
5. If you can't see this you must start again with drivers installation.
Without these drivers the program can't work.
If you have not this result(4.4.) you can't use the program
http://www.gsminstructor.com/ftp/filesforusb98_oem.zip
What you are saying is that when i use ipls for example, i should remove battery, and flash without a batter on?
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
I don't see put battery back
I still cannot get it to work
Raptor
for e228 excist but i still can't install drivers.
when i connect cable to pc it regognize the "e228 nec" but when i give path to the folder with this drivers i get the message:"windows was unable to locatea driver for this device"
p.s.:i'm using original GX30 USB cable
yes but this is not a driver probelm its a cable problem need to have a correct pinouts with external power supply any one who can share the correct pinouts with external power supply :)
Platijet
12-29-2004, 13:03
yes but this is not a driver probelm its a cable problem need to have a correct pinouts with external power supply any one who can share the correct pinouts with external power supply :)
ok but my pc regognize the phone very well(new device found e616 etc)
exactly the same probelm i have PC is detecting the device attached but not accepting drivers :(
Siemens man
12-29-2004, 20:32
hi guys
i can't enter to test mode. all drivers installed. see in system no problem. how connect phone to soft????????????? i don't under stand. help me
thank you
The USB cable is for 3G NEC - 228 , 313 , 616
This is the drivers for new NEC phones.
When you switch on the phone Windows will ask for usb drivers.
You have drivers for 228, 313, 616 in the zip file.
Every time when you start windows it load the drivers. When you start
the unlocker and connect the phone to the pc you will see a little
delay - the reason is because windows load the drivers.
You have to follow very strictly the instructions of the program. The
program will show you when to connect the cable and when to disconnect
it, when to put the battery and when to remove it, etc...
Test the drivers first before run the software. Follow these steps:
1. Find one 228 one 313 and one 616
2. Connect the phone to the cable - it must be switched on
3. Install the drivers
4. When the installation for all drivers finished:
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
4.4. Few seconds later the display must be blue and to have this text:
A:
C:
blue(color not text)
blue(color not text)
blue(color not text)
.
.
.
blue(color not text)
616v: the test mode display on the e616v appears on the
small outer display and not the inside screen.
5. If you can't see this you must start again with drivers installation.
Without these drivers the program can't work.
If you have not this result(4.4.) you can't use the program
http://www.gsminstructor.com/ftp/filesforusb98_oem.zip
gsminstructor
12-30-2004, 12:00
Files are there again sorry for deleting :cool:
the driver of e313 dont work ???