3G Unlocker Cable Modification!

[navid]

Please could someone clarify the confusion over the modification of the cable for 3G unlocker?
I modified the china made GX30 USB cable with the teleway pinouts given in other threads but it doesn't work. It behaves same as before i.e like non modified GX30 cable. The win98 doesn't find my e313 when its connected without a battery.
I think there is a problem with a modification which I have carried.
I noticed a difference between pinouts given by the SPunlock and teleway. The RX and TX are swaped.

Pinouts by SPUnlock

nec 616, keyboard up

1 2 3 4 5 6 7 8 9 10 ()

1- gnd
2- rx
3- tx
4- vcc
5- shortcut to pin4
6- not connected
7- not connected
8- shortcut to pin9+pin10




USB Pinout
Type A Plug (for USB controllers and hubs)
------------------------------------------

Solder/crimp view (or socket view)

________________
| x x x x |
| 1 2 3 4 |
| |
----------------

Pin 1 vcc Red
Pin 2 rx White
Pin 3 tx Green
Pin 4 GND Black


Teleway Pinouts

http://www.one-stop-factory.com/big.jsp?img=2927scheme.gif



Hope someone will help many who are strugling to make this cable work!


Thanks!

[Unlockmaster]

Just buy modified cable for about tenna from few UK ressellers, less STRESS !!!

[needi]

Well if wana modify the cable just see schematics at www.tele-way.com

Regards.

[navid]

@needi
Thanks for the reply!
I did modified the GX30 cable to the teleway schema but no luck!
I found that the GND, RX and TX were same to the teleway schema, only had to short cut below pins.
*shortcut pin4 to pin5
*shortcut pin8 to pin9+pin10

Pls correct me if its wrong!
Thanks

[massy]

here is a good cable modified: