Lg 3g Flashiing [Archive]

magnet

01-10-2005, 16:20

i have flasher , flash files
but no cable, i made a cable com+usb as defined in schematics.

when i power on the phone , flasher is not responding.
if it is cable problem ,cable is working well for babe unlocker and furious cracked.

what to do now?

actual problems are........
1) 8120 blinking problem
2) 8120 v 103 for unlock.
want solution for both.

please want an helping hand regarding these..

thanks in adv
magnet is online now Edit/Delete Message Reply With Quote Quick reply to this message

ihsanali

01-10-2005, 16:34

did u provide 9v to cable or not

magnet

01-11-2005, 07:19

thanks for your reply
no , please tell me the pinouts for 9v

thanks in adv

gsm_b0y

01-11-2005, 08:30

This is the pinout for 9V scheme:

Top Side of connector(phone Display)

24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

21 link to 2
19 link to 12 to gnd
18 tx(max 232)
17 rx(max232)
16 +5v (usb)
15 tx(usb)
10 rx (usb)

Check http://forum.gsmhosting.com/vbb/showthread.php?t=176674&page=2&pp=15&highlight=8130+flasher at Hunk4004's post
I made this cable and it's work 100%. I flashed an LG 8130 and some 8120. :)

magnet

01-11-2005, 09:03

@gsmboy

thanks for ur prompt reply.

i made my lg unlock cable destroying my t191 cable for rx tx gnd.
please tell me where to give 9v + for which pin.

thanks in adv

gsm_b0y

01-11-2005, 09:45

You must use a cable which have DB9 connector for serial and supply connector on it. It is the easy way. Your cable is good, but only for unlock. I made my cable from a gx15 cable.

magnet

01-11-2005, 10:20

can you suggest me a cable.other than gx15

x70?????????

thanks in adv

gsm_b0y

01-11-2005, 11:37

If it has db9 connector and supply connector it's good. It could be X70.

infogsm

01-11-2005, 12:17

pinout given by gsm boy are working perfectly!!!
i already flashed a dead 8110 and it's working fine now!!

magnet

01-11-2005, 14:13

can i use 9v universal box which comes with 55 cables

riprex

02-09-2005, 15:18

This is the pinout for 9V scheme:

Top Side of connector(phone Display)

24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

21 link to 2
19 link to 12 to gnd
18 tx(max 232)
17 rx(max232)
16 +5v (usb)
15 tx(usb)
10 rx (usb)

Check http://forum.gsmhosting.com/vbb/showthread.php?t=176674&page=2&pp=15&highlight=8130+flasher at Hunk4004's post
I made this cable and it's work 100%. I flashed an LG 8130 and some 8120. :)

OK ..everywhere I see this cable pinout the USB communication is described as RX and TX. There is no such a thing!!! USB communication is more similar to RS485 than to RS232. There is USB- and USB+ and the data is transmited both ways using USB frames.
SO WHICH ONE IS USB+ and USB-????
:confused: :confused: :confused:

ics_igrec_zet

02-09-2005, 16:41

Here usb pinouts, but to your cable don`t put gnd. Use only +5v, data+, data-.
And one more thing, tx and rx means TX data or RX data
BR, xyz

cellcare

03-09-2005, 20:46

i make a cble and connact with phone . dettacting lg8xxx but asking driver wchich is the driver

donaladino

03-09-2005, 21:53

this is a driver which u want my friend

Hellas

03-10-2005, 07:38

i have flasher , flash files
but no cable, i made a cable com+usb as defined in schematics.

when i power on the phone , flasher is not responding.
if it is cable problem ,cable is working well for babe unlocker and furious cracked.

what to do now?

actual problems are........
1) 8120 blinking problem
2) 8120 v 103 for unlock.
want solution for both.

please want an helping hand regarding these..

thanks in adv
magnet is online now Edit/Delete Message Reply With Quote Quick reply to this message
http://www.xtreme-h.net/~filarkiv/
http://mio.discoremoto.virgilio.it/vittoriovalerio/
http://www.furiousdongle.com/guides-lg3g-flasher-en.php

cellcare

03-10-2005, 14:07

my friend i make this cable and try with software first bootting oki secand botting with usb is not working usb cable is oki and get driver please help me

Hellas

03-10-2005, 17:09

my friend i make this cable and try with software first bootting oki secand botting with usb is not working usb cable is oki and get driver please help me

You need EPACOMMDRIVER.
If you have FLASHRW, can find it in.

descovery

03-10-2005, 17:22

after u besure for u drive's setup
u show this massege
last diver u will be need with the loader
EPACOMMSetup

cellcare

03-10-2005, 17:23

done sir its oki now thanks oki

cellcare

03-10-2005, 17:24

done sir its oki now thanks oki lot of thanks looooot of

gsmhosting

03-14-2005, 09:06

Hi

I have a problem lg u8120 v101 when i unlock it with baby soft the message appear time out what to do please help.

thanks in advance

gsmhosting

03-14-2005, 09:38

hi how r u i have 3310 when i reset it it show id on screen what to do please help

gsmhosting

03-14-2005, 09:45

Hi thanks for that

thnks in advance