kohler
01-13-2005, 22:50
I need some comment from Lg blazer'er . I just got my LG blazer yesterday and have some bad experience with this product. I also got a 5metre serial printer extention cable as it was not incuded inside the package.
Setuping the equipment is pretty straight forward and i tried to test each LG cables (A -F ) and the box is able to detect the cable properly. When i tried to test it on my LG 8120 ver 100 on my personal desktop computer, it kept prompting "communications error".
When i tried on the another computer, it is able to connect to the phone but it is very stable. When i tried to press the connect button , the program will said that "connecting phone ..pls wait " ....then it will said "communications error" before the program actually connected to the phone.
In summary , the sequence is as follow
"connecting phone ..pls wait" ==> "Communications error x2 " ==> "connected"
The problem has not yet end . Even thou it is connected , the program does not show the model of the phone and the IMEI number. Check this jpg file (http://us.f1f.yahoofs.com/bc/3fd6d3cd_m4190c6ef/bc/modem/blazer+problem.jpg?bfBKv5BBQff0Vyyl) Sometime it is able to show the model of the phone and the IMEI but somehow it did not show all the IMEI number. In my first attempt, i press the unlock button and it kill my LG 8120 phone instantly. The phone is totally dead and unable to boot up with the battery . Fortunately i manage to get a replacement set from my seller.
During my second attempt on my new replacement phone , I have to connect to the phone over 50 times before it FINALLY show the model and all the IMEI number. I manage to unlock the phone finally.
Do any one has this similar problem as what i have encounted. I need some help badly cos my blazer look pretty unstable.
I suspect that my serial cable is too long or the F cable is faulty. Any advise. I read a thread about communication error , do u think it is the cable faulty. ?
Also , if the LG 81xx phone is dead , do u think i can recover the phone back by flashing the phone with the flash cable.
Setuping the equipment is pretty straight forward and i tried to test each LG cables (A -F ) and the box is able to detect the cable properly. When i tried to test it on my LG 8120 ver 100 on my personal desktop computer, it kept prompting "communications error".
When i tried on the another computer, it is able to connect to the phone but it is very stable. When i tried to press the connect button , the program will said that "connecting phone ..pls wait " ....then it will said "communications error" before the program actually connected to the phone.
In summary , the sequence is as follow
"connecting phone ..pls wait" ==> "Communications error x2 " ==> "connected"
The problem has not yet end . Even thou it is connected , the program does not show the model of the phone and the IMEI number. Check this jpg file (http://us.f1f.yahoofs.com/bc/3fd6d3cd_m4190c6ef/bc/modem/blazer+problem.jpg?bfBKv5BBQff0Vyyl) Sometime it is able to show the model of the phone and the IMEI but somehow it did not show all the IMEI number. In my first attempt, i press the unlock button and it kill my LG 8120 phone instantly. The phone is totally dead and unable to boot up with the battery . Fortunately i manage to get a replacement set from my seller.
During my second attempt on my new replacement phone , I have to connect to the phone over 50 times before it FINALLY show the model and all the IMEI number. I manage to unlock the phone finally.
Do any one has this similar problem as what i have encounted. I need some help badly cos my blazer look pretty unstable.
I suspect that my serial cable is too long or the F cable is faulty. Any advise. I read a thread about communication error , do u think it is the cable faulty. ?
Also , if the LG 81xx phone is dead , do u think i can recover the phone back by flashing the phone with the flash cable.