D500 Com cable pinout [Archive]

Hotdog

01-19-2005, 18:59

Is the D500 flash cable the same as anything else. Cause i can't flash with E700 cable. Any pinouts??? Using original samsung software, so has to be serial! Thanks :(

gsminstructor

01-19-2005, 19:48

Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx
6- Rx
8 <-> 11- GND

keyboard side
18..................1

18 pin Samsung right-to-left numbering mobile special connector at the mobile phone ? Pin Signal Description

5 Tx-------------- ?? from maxim
6 Rx-------------- Rx from maxim

8,11 short ------------- GND

opo

01-20-2005, 10:51

Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx
6- Rx
8 <-> 11- GND

keyboard side
18..................1

18 pin Samsung right-to-left numbering mobile special connector at the mobile phone ? Pin Signal Description

5 Tx-------------- ?? from maxim
6 Rx-------------- Rx from maxim

8,11 short ------------- GND
tested 100% unlock+repair IMEI :)

Hotdog

01-20-2005, 11:50

Thanks for reply guys. But i want to convert T100 cable (PCB03DBE) successfully converted these for E700/800 flashing, so presuming i can do the same again. Also because using Corona downloader from samsung need the cable to be serial and not USB. Again thanks in advance for any info ;)

opo

01-20-2005, 16:16

same pinout , don't conect pin's for usb
Regards

Hotdog

01-20-2005, 17:19

BUt which colour wire of the standard original T100 cable correspond with the pins? ie. which colour is tx/rx etc. Thanks for advice, off on hols for a week, so will try upon return. Tenerife here i come :cool:

936mw

01-26-2005, 10:43

convert cable T100 to D500???????????

-=Ghostface=-

01-26-2005, 23:33

Can somebody translate this too english ?? please ??

936mw

01-27-2005, 10:33

altavista.com translate
and pinout flash with max 232 is
1 short 14 ;8 <-> 11- GND;5 rx;6 tx(or 5 tx;6 rx)
100%