View Full Version : new_nec_logger_v4
Try it. I don´t know if it work. Or if it somthing good.
Already tested on NEC_E313_17_18_04_22_01_05
Works 100%
But what will you do with the Log file??? It has to be converted!!!
Working! But tis thing is totaly useless. :(
krolitshek
01-22-2005, 17:58
what for is this log?
Yes thats right... But if you have decrypter than not!! You can use it also as Remote Unlocking :)
krolitshek
01-22-2005, 18:08
ok, but how to do it? :]
who has tried this and it works 100%.
sandokaan
01-23-2005, 02:20
hmmm?, perhaps interesting but there is only com1 and com2, wich cable to use ?
Could anybody who tested it explain how this logger works?
arash111
01-23-2005, 03:06
Totally useless only COM1 and COM2 available ...... where to use it when COM1 and COM2 is serial ports ..
MicrostarGSM®
01-23-2005, 07:12
Totally useless only COM1 and COM2 available ...... where to use it when COM1 and COM2 is serial ports ..
you are worng as i can see there is many port for it.
try connect the cable to phone then run the software you can see the comport for the usb
__AFRO__
01-23-2005, 15:02
How read this file? Hmmm who know?
arash111
01-23-2005, 16:29
you are worng as i can see there is many port for it.
try connect the cable to phone then run the software you can see the comport for the usb
Man i got only COM1 and COM2 in the software at ex furious multi unlocker i got COM1, COM3, COM4 which is correct
shakeelajmal
01-23-2005, 16:54
this thread needs modrations infect......... place for this kind of thread is in trash
I have tried this program, and yes once correct drivers installed com 7 appears, which is the com port i need for usb 616, program saves data to log file, .bin the only question i have is what use is this encrypted file? any serious replys welcome....
Cheers Renke
my problemme for E228 reading dadt...Error help me plz
MicrostarGSM®
01-24-2005, 08:07
with loger but who is the the one calcuate the log file??/
sand4all
01-24-2005, 16:03
U have to plug the fone in first, then run up prog. Then u will find it had lots of COM ports. PICK the OBEX com port. DEVICE/manager should give u a hint wich one to use.
any one knows what to do with the log files?
I just can't get my e313 to connect, it detects com7 it starts initiation , when it gets to 21% stops and gives me reading error even with special cable not normal usb, this one as been changed to unlock the nec phones , same thing with nec free unlocker on windows 98se it shows initiation and then says timed out
any solutions?
sand4all
01-24-2005, 20:52
is it connection on the OBEX Comport?..Mine is usually on COM4. I always look in device manager first just to check.
hello anybody .....does anybody know how i can use the bin file
thx
benguetcowboy1
01-25-2005, 15:06
hello anybody .....does anybody know how i can use the bin file
thx
any new news bout this???
tryed,prog i think work......but......now the log file???????
anyone have a decrypter?
the log generated is impossible to use.......whitout decrypter.
result is: phone still loked.....no good news for me.
137parth
01-25-2005, 15:52
agree .. if u cant figure out a way to use the log file..there is no need to discuss how the phone connects ...actually it does not at all matter if it connects or not cuz u cant use it..
Mods shud close this thread and save space
spectrum
01-25-2005, 16:07
Maybe somebody can decode by using hex?
this log can be using only in Forious DonglE NEC Unlocker, but this program want log to unlock...
Gsm_box1
01-25-2005, 17:25
all problem fruis donglo problem gsmkey problem
loger problem
bilder helppppppppppp
com9 problem com 8 problem help
Aamir_Zia
01-25-2005, 19:28
Who can Calculate Codes from this LOG ?
To all people getting error on connection after 21% may vary on computers "com port 1,2,3,4 etc..
Please the same com port that reads it until 21% ,but with battery removed , now i know it might be strange but with special modded cable the phone will power back up and screen initialy turns yellow then blue , when it comes to blue press start log and it will read it all and then saves it to bin file.
That same file will be read by some calculator like sendo,sagem logs to decode the file and hopefully in the end giving you the right codes.
I believe such thing is already available in the market but at a not affordable price.