Nec Free Not Working Today Pls Chack..

[sunnyc]

Nec Free Not Work Today I Will Try 3.pc
It Not Open Pls Chacked .............

[Fre3 Crack3r]

In win98se working . . i check it now . . in XP not work

And this is time pass pb ;) U need make patch or edit PC time

Regards . . :D

[masterh25]

not forget the good pinout & connecting phone without batterie.

[Fre3 Crack3r]

not forget the good pinout & connecting phone without batterie.

We dno't talk about phone connection here !!

We talk about soft stope working today because time limit

See attach . . !

Regards . . :D

[Maurone]

We dno't talk about phone connection here !!

We talk about soft stope working today because time limit

See attach . . !

Regards . . :D


Pls friend have you a new key to sostitute old key of NEC free?

I very need! :(

Thanks

[SJS]

Also: For me is working in 98 and ME! no problems

[pal sethi]

how did you manage to use in the windows me as i tried it doesnt work or in xp can you please tell me

[SJS]

In XP not work. In ME i only double click the loader button!

[bcnboy]

Mine also working in win98se without any problem, just did 2 phones today.

regards
bcnboy

[ivalavamp]

Remove the temporary key, restart the PC and double click loader.exe.
:)

[foony]

I have the same problem with starting soft. Soft does not start in W98. Only this error.

[sunnyc]

I have the same problem with starting soft. Soft does not start in W98. Only this error.
Same problem me in my all pc......

[alfred62]

NEC FREE + SST timepatch dont match......
i run nec free in my wifes computer no problem.......

[sale]

100% works and you have something wrong on your PC's...try on clean one...

[chowdary]

I have the same problem with starting soft. Soft does not start in W98. Only this error.
double click on the time onn bottom right corner and see if date is correct otherwise just reset the clock and date it should be ok
br

[foony]

double click on the time onn bottom right corner and see if date is correct otherwise just reset the clock and date it should be ok
br

Time is ok, but how can I reset the clock and date?

Thanks

foony

[chowdary]

i am having totaly different problem. i van open the program start reading codes it says INITILIZATIN then CONECTING then CONECTION TIME OUT. BUT when i retry or try to close the program it gives me these errors
KERNEEL.DLL
SHLWAPI.DLL
any idea guys?
while i m running this program on another pc WIN.ME. without anyproblem
these errors i m getting on WIN. ME.
BR

[mohd_anan]

i am having totaly different problem. i van open the program start reading codes it says INITILIZATIN then CONECTING then CONECTION TIME OUT. BUT when i retry or try to close the program it gives me these errors
KERNEEL.DLL
SHLWAPI.DLL
any idea guys?
while i m running this program on another pc WIN.ME. without anyproblem
these errors i m getting on WIN. ME.
BR

what windows u using ?

Windows SE is the required one dear

ANAN

[jan_gabriel2000]

i've just unlock 1 piece of Nec E313....in win98se...soft works excellent....

regards

[foony]

i've just unlock 1 piece of Nec E313....in win98se...soft works excellent....

regards

Ok, I know, but how to run sw correctly again withou reinstalling W98. Without this error.


www.ifc.sk/foony/3ge.jpg

[jan_gabriel2000]

Ok, I know, but how to run sw correctly again withou reinstalling W98. Without this error.


www.ifc.sk/foony/3ge.jpg
try to delete key....put the clock to another time and date and after that try to run the loader again....


regards

[foony]

try to delete key....put the clock to another time and date and after that try to run the loader again....


regards

I have tried everithing (deleted key, changed time, restart PC...) but still error. Maybe there is needed some fixing registry, but it is only for experts :-(

[manouba]

may be trying setting clock with bios settings will help you all

[mtony969]

I have to do this :D

He He :D

[giorgi2002]

RUN REGEDIT AND DELETE THIS KEYS
[HKEY_LOCAL_MACHINE\Software\CLASSES\CLSID\{0C75881 3-8466-13D1-B2E4-0060975B8649}]
[HKEY_LOCAL_MACHINE\Software\Description\Microsoft\ Rpc\UuidPersistentData]
[HKEY_LOCAL_MACHINE\Software\Licenses]

and all ok

[stlan88]

RUN REGEDIT AND DELETE THIS KEYS
[HKEY_LOCAL_MACHINE\Software\CLASSES\CLSID\{0C75881 3-8466-13D1-B2E4-0060975B8649}]
[HKEY_LOCAL_MACHINE\Software\Description\Microsoft\ Rpc\UuidPersistentData]
[HKEY_LOCAL_MACHINE\Software\Licenses]

and all ok


After delete still don't work for me...

[giorgi2002]

FOR ME GOOD WORK:)


best regards

[spguru]

For me works fine so far without doing anything.

BR

[foony]

Any next good advice to run NEC sw correctly again without reinstaling W98? I think only some editing registry can hepl, but I am not expert. Is here somebody, who know to solve this problem?

thanks

Foony

[foony]

RUN REGEDIT AND DELETE THIS KEYS
[HKEY_LOCAL_MACHINE\Software\CLASSES\CLSID\{0C75881 3-8466-13D1-B2E4-0060975B8649}]
[HKEY_LOCAL_MACHINE\Software\Description\Microsoft\ Rpc\UuidPersistentData]
[HKEY_LOCAL_MACHINE\Software\Licenses]

and all ok


This reg-fixing not work :-(

[Aamir_Zia]

Change Time from BIOS Mode
Go 1 Year back :D

Format c driver

Install OS 98

it will now 100% work

[Seedy]

Just change the system clock back a day only and it works :)

[pedro7208]

It works yes !!!!! :D :D :D
thx Seedy


Regards

[foony]

Just change the system clock back a day only and it works :)


any changing clock does not work

[foony]

Change Time from BIOS Mode
Go 1 Year back :D

Format c driver

Install OS 98

it will now 100% work


Format C or installing new w98 works 100%, but I can reinstall my pc now.

[sunnyc]

Just change the system clock back a day only and it works :)

I WILL TRY ALL BUT NOT WORK ONLY REINSTAL WINDOS

[crossings]

Why nobody cannot make program working withaut any key at all? Who build this program should share it free now withaut protection as it is already free cracked :)

[pedro7208]

Foony
any changing clock does not work




Just 1 day back (25/01/05)

[foony]

Why nobody cannot make program working withaut any key at all? Who build this program should share it free now withaut protection as it is already free cracked :)

Yes, you are right. Author, try think about it please.

Foony

[foony]

Foony
any changing clock does not work
Just 1 day back (25/01/05)

not not working, I think only some registry editing can help, or some fix program form author. Or new 3g sw.

[The Phone Guy]

Just put my clock back 1 day and hooray im back working again!

Will this happen every day?

[jab]

I tried to run the free nec program today and got a message box saying your temporary key has expired. contact your author. then asks for a key.
any ideas how to solve this problem?
:( :( :(

[foony]

Just put my clock back 1 day and hooray im back working again!

Will this happen every day?

Yes, every day this error, any changing date noe work. I do not have "expire key problem" my problem is in the picture.

Foony

[sunnyc]

Yes, every day this error, any changing date noe work. I do not have "expire key problem" my problem is in the picture.

Foony

reinstal windos98 and try again

[sunnyc]

Just change the system clock back a day only and it works :)

Ur lucky man ur nec free working any time just back clock a day

:) :rolleyes:

[covtalk]

simply changing time on computer does not help. have tried, have same problem.

[covtalk]

changing bios clock does not help

[nykocam]

for me work good after change data to 25/01 in bios setup......
if u have key file need to delete,reboot pc,change date in bios.
is all
regards

[Spacewalker]

not good. Delete regfile - not work, run second clean computer - not work, run other computer with Win98 change date to 19.01.2005 - not work ;(

[ASHIF]

same thing happened to me on 2 pcs...i have tried on more than 2 pcs...same problem :-(

[Stryker]

yesterday (01-25-05) i had successfully unlocked 1-e313 without problems. today i tried to run the software again, but the "key has expired". i changed the time/date to earlier times but still error.

i tried on 2 computers the same problem.;(

[maxmix]

Today 26-1-05 I have same expiry message....

I cahnge date back 1 year, 1 Month etc... Still the same...

I changed date to yesterday (25-1-05) Everything OK.... ;)

Thanks

maxmix

[Tanvir]

@maxmix.... right .. working with (25-01-2005) Everythig works GOOD :D

Regards,
Tanvir !
www.tanuelectronics.com

[maxmix]

Set your date back exactly 1 day.... to 25-1-05 Expiry problem solved for now ;)

maxmix

[white van man]

Set your date back exactly 1 day.... to 25-1-05 Expiry problem solved for now ;)

maxmix
reg worked for me. :)

[SoSgSm]

yes good works ;) ;)

[hema]

setting the date back either in BIOS or whatever did not help in my own case, let the author of the program tell us what to do

[softmaster]

set date back to 25-1-05 , and all working fine now..

[maxmix]

Strange.... But at least we are still unlocking for FREE ;) and have not so many problems as the Furious and Spear Users ;)

maxmix

[king12]

unistalled program then set date back one day worked

br

[stlan88]

The program will work on 25-1-2005 only...

It expire after 25-1-2005...

So when u want to use the program just set your

pc date to 25-1-2005...tested 100%..!!

[foony]

The program will work on 25-1-2005 only...

It expire after 25-1-2005...

So when u want to use the program just set your

pc date to 25-1-2005...tested 100%..!!


Yes, but it is solution for "exipire problem", but how can I solve this problem on the picture?

[flashman78]

The program will work on 25-1-2005 only...

It expire after 25-1-2005...

So when u want to use the program just set your

pc date to 25-1-2005...tested 100%..!!

very good solıtıon
:D

[distefano]

Just try to buy any SW on dongle, it is so cheap and if You gonna earn money in this busines You must know that not all is free !!!!!!!!!!!!!!!

WBR

[midou01]

for me i set back my clock to 25/01/2005 and it works on 2 pc. only for 25/01/2005 don't use an other date.

[onu]

same problems for me.

[Seedy]

Look guys this is a FREE SW so stop bloody moaning about changing the date !! Dont you think its better than nothing !?

PS Remember though by changing the date you might affect other sw / programs which has date sensitive information ;)

[ASHIF]

on some pc it even not working on 25-1-05 ...........

[75133]

Set the date back 1 year not work
set date back 1 day to 25/1/5 WORKED! :)
set date back 2 days to 24/1/5 WORKED! :)
set date back to 3 days to 23/1/5 DID not WORK :(

[covtalk]

And theres me re-installing 98, backing up all files by bluetooth! (Yawn) - doh!

[nykocam]

my experience from today:
if have other pc change date to 25/01,
copy nec free in the pc,
run loader.
for me (today) work.
greetings

[nykocam]

28/01
today i have set the day to 25/01 in pc whe have necfree.
i have set in bios setup first of boot pc.
for me work

[covtalk]

you can get the licence for 99 euris in the main sales section. then it will always work - we hope! :)

[sunnyc]

not working all .......................................

[tele-teknik]

pc date to 25-1-2005...tested 100%..!!

very good solıtıon

[prabue]

first set the date to 01-01-2005, then format C drive , reinstall the windows and it will work 100% fine

[yousha]

first set the date to 01-01-2005, then format C drive , reinstall the windows and it will work 100% fine

NO format needed at all :)

[sunnyc]

NO format needed at all :)?????????

but how to fixed this big problam ?????????

[XteL]

first set the date to 01-01-2005, then format C drive , reinstall the windows and it will work 100% fine

i have format c drive and reinstall windows but not work :(

[Siemens man]

not working
i'm test all solution why??????????????????????????

first set the date to 01-01-2005, then format C drive , reinstall the windows and it will work 100% fine

[prabue]

delete all old nec3g software in all drives , and then set the date to 01-01-2005 in win98 & also in dos mode before formating , then format C drive , reinstall the windows , while instaling you should enter the same date 01-01-2005, then download the nec 3g software , extarct it in c driver it will work 100%

by this method i tried with my 3 pc, working fine 100%

[cleanhead]

change date, delete all , reinstall OS with other day (25-01-2004) ....not working.....
ciao

[aleksgsm]

change date, delete all , reinstall OS with other day (25-01-2004) ....not working.....
ciao
you foget FORMATED a disk

[cleanhead]

...i forget to write...it s normal to format before install new OS ....

[XteL]

change date, delete all , reinstall OS with other day (25-01-2004) ....not working.....
ciao


no your solution not work 100% for resolve the problem use this solution


change date to 1/10/2005
format your pc
reinstall win98
download nec program and folder in c:\ not in other directory
run the program

this solution in my pc work 100% test in your pc

[cleanhead]

....."change date to 1/10/2005
format your pc
reinstall win98
download nec program and folder in c:\ not in other directory
run the program"....

ok now i try ......win98SE it s the same?

[cleanhead]

...great!
right solution! work 100%! many thanks!

ciao

[byteforce]

Can somebody upload the original nec-free program in the .rar format that it was because I always extract from archives, and I don't have it right now. thnaks in advance

[covtalk]

here this is it i think

[byteforce]

Can somebody upload the original nec-free program in the .rar format that it was because I always extract from archives, and I don't have it right now. thnaks in advance


I already found it. I thought it is not on the forum?

[byteforce]

thanks @covtalk very much

[covtalk]

Ps I can confirm to get around the bug - you must restart system and reset bios clock to 1st jan 2005, then restart in ms dos, format drive, re-install windows, then re install nec drivers, then re-install nec free software then re-start then click loader and all should be ok ! yawn! ps does anyone have solution for V22 and above yet ? thanks

[sunnyc]

it working i am use my all pc and unlocked today e616v 3 phones

[covtalk]

this versaion does not do v22 and above. how did you use this osftware to do that ? e616v is v22 ?

[sunnyc]

this versaion does not do v22 and above. how did you use this osftware to do that ? e616v is v22 ?

TRY> THIS LINK http://www.gsm-repair.biz/nec/

[prabue]

later.TRY> THIS LINK http://www.gsm-repair.biz/nec/Service
Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again

LINK NOT WORKING

[sale]

predators and prays on same topic again...if they were not post s**t soft all will be ok...2-3 posts and we are in the big sale game....

[topdinosaurs]

Simple Solution
Install Armadillo In Win98se
Without Formatting
Without Changing Bios Date

[adeelg1]

not working for me at all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[adeelg1]

Simple Solution
Install Armadillo In Win98se
Without Formatting
Without Changing Bios Date


whats it???????????????????

[sonkar]

Solution not working for me,lets hope someone can crack the soft and make it work properly.

[nykocam]

my experince:
just a copy of my message in other topic........
copy necfree in pc whe have date set to 25/01 (need a clean pc,whitout any try to use necfree),run loader..is all.
for me work correct if i change the date all days first to use that prog.(work from 26/01/05).
if the pc ,in weekend,adjust the date,just need to re set date 1st to use necfree.
sorry for my bad english.

[nykocam]

my experience:
just a copy of my message in other thread........
copy necfree in pc whe have date set to 25/01 (need a clean pc,whitout any try to use necfree),run loader..is all.
for me work correct if i change the date all days first to use that prog.(work from 26/01/05).
if the pc ,in weekend,adjust the date,just need to re set date 1st to use necfree.
sorry for my bad english.

[softmaster]

later.TRY> THIS LINK http://www.gsm-repair.biz/nec/Service
Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again

LINK NOT WORKING

download video from www.gsmjunction.com/necvideo.rar

and you can follow the instructions in the video to unlock your v22 phone

[Siemens man]

hi guys
some in PC working. some pc not working. i think this soft not good cracked.. need 101% cracked soft, working in every PC. who is can make it??
waiting........................................... ........

[gabiz_ro]

just make one more try
download FileMonkey from www.monkeyjob.com/FM.htm,install (http://www.monkeyjob.com/FM.htm,install) program and launch them,select windows directory,press on dates,mark on subfolders and hidden folder,mark all date and time and put one date from january ex 01/01/2005 and time what you want.... now press on start program will ask you if you are sure for subfolders press proceed,wait to complete press close and close program.now change date on your pc somewhere between 01/01 and 25/01 2005.lanch loader.exe and I hope will work.for me work without restart.if still not work you may try to erase key from registry,temp file,unarmmap and win386.swp.but 99% will work just with date of file changed.
good luck!

[nykocam]

the problem now is:that softw. is a trial........just work for 30gg,right?

[gabiz_ro]

yes
but works for you?

[sunnyc]

yes
but works for you?


NOT WORKIG .................................................. .

[sonkar]

Yes i think that the best solution for so much headache is someone getting a good crack from the soft

[Siemens man]

hi guys
wooooooooooooooooooow!!!!!!!!!!!!!!!!!!!!
my soft nec now working. today working, nice solution. try it....... working 100%. tested in in 10 PC. no problem
good luck to all

just make one more try
download FileMonkey from www.monkeyjob.com/FM.htm,install (http://www.monkeyjob.com/FM.htm,install) program and launch them,select windows directory,press on dates,mark on subfolders and hidden folder,mark all date and time and put one date from january ex 01/01/2005 and time what you want.... now press on start program will ask you if you are sure for subfolders press proceed,wait to complete press close and close program.now change date on your pc somewhere between 01/01 and 25/01 2005.lanch loader.exe and I hope will work.for me work without restart.if still not work you may try to erase key from registry,temp file,unarmmap and win386.swp.but 99% will work just with date of file changed.
good luck!

[gabiz_ro]

like I said for me work without restart even if date was 2006 august.after set date of files in january 2005 and date of pc back in first day of january all work ok.

[sale]

people do not use all those "cracks" will distroy registry...and new reformat and install...next time for all those "friends" will post something special...mother f*ckers...
buy yourself licence...or buy logs...crack is possible but they are posting solutions that f**k your pc and after that even crack will not work...

[unlockfry]

just make one more try
download FileMonkey from www.monkeyjob.com/FM.htm,install (http://www.monkeyjob.com/FM.htm,install) program and launch them,select windows directory,press on dates,mark on subfolders and hidden folder,mark all date and time and put one date from january ex 01/01/2005 and time what you want.... now press on start program will ask you if you are sure for subfolders press proceed,wait to complete press close and close program.now change date on your pc somewhere between 01/01 and 25/01 2005.lanch loader.exe and I hope will work.for me work without restart.if still not work you may try to erase key from registry,temp file,unarmmap and win386.swp.but 99% will work just with date of file changed.
good luck!

thankssss gabiz work for me , but i can't ulnlock 1 e616v sv18 downgraded to sv17 , i put codes and nothing happend to phono and costumers doesn't try to put any code before, what happend?.
sorry my english

[spguru]

An idea
-------
For me working solution: set date to 01/01/2005 then reinstall w98 on P200/32MB/1.2GB around 40-50min.NOT A BIG DEAL!Put all your soft you need on it!The first make registry backup along with ghost copy of the partition.The soft works 100% with fresh installation by dated 01/01/2005.If the key prob happens again,delete software,unarmap,temp folder then restore registry.Should work but if nothing goes fine you still have the ghost bckp which is 7min to restore the fresh installation.

BR

[adeelg1]

now its working just now unlock 1 e616v sv 18

dont know how,have tried method all of them

[gjurobrod]

just make one more try
.......
.......
good luck!

Sh!t...
haven´t seen it on time so I´ve made format c: yesterday :rolleyes: :D
but it works,tested!

Thx and br,gjurobrod

[Ercie]

Working!!!´but you must set date to 24/01/05 or 25/01/05
dont use other date like between 01/01/05 and 23/01/05

good job ;) dear erci

[topdinosaurs]

Without Formatting
And Without Changing Date
Only Install Armadillo

[topdinosaurs]

Here What You Need.......................

[louch]

we need it for what and haw

[globeroma]

ok, but how use armadillo for find correct key? :confused:

B.R.

[Siemens man]

how work it????????????
thanks
Here What You Need.......................

[polymar]

Please,tell us the correct use of amradillo

[ProfiTel]

Just change the system clock back a day only and it works :)

did not work for me :mad:

[gjurobrod]

Hi,
just use "monkey"!

Wbr gjurobrod

[sunnyc]

TRY> THIS LINK http://www.gsm-repair.biz/nec/

1 more link :http://tecnomouse.altervista.org/

[topdinosaurs]

1-install armadillo
2-lunch armadillo
3-at the same time lunch nec free
that's all

[sunnyc]

1-install armadillo
2-lunch armadillo
3-at the same time lunch nec free
that's all

CAN U TESTED THIS U R PC PLS TELL ME THX >>>>>>

[topdinosaurs]

tested by me and all correct
test and reply
thanks

[adel11]

I think you are wrong :confused:
nothing will happend :cool:
the programm will ask for key

[topdinosaurs]

I think you are wrong
test it before thinking after that yo will think that it is correct

[hiteshsangadia]

HI ALL MEMBERS.....
PLEASE GIVE ME ADVICE FOR PURCHASING NEW SOFTWARE (box) FOR : LG....NEC...SHARP....MOTOROLA....SAGEM
My email : raj_hit2003@yahoo.co.in

[ASHIF]

multiple posts should be deleted ---------------mods where are u

[sunnyc]

HI ALL MEMBERS.....
PLEASE GIVE ME ADVICE FOR PURCHASING NEW SOFTWARE (box) FOR : LG....NEC...SHARP....MOTOROLA....SAGEM
My email : raj_hit2003@yahoo.co.in
from where and which box should i purchase. to be use in india
Hitesh

Hitesh...This is not sales section... pls move sales ..

Dont post again .....


sunnyc

[prabue]

HITESH

dont do multiple post

[roboxss]

I've a question, i've unlocked my nec e228 with the NCK key, which is the result if I use SIM,SPCK and CP keys?? (sorry for my poor english).

[roboxss]

1-install armadillo
2-lunch armadillo
3-at the same time lunch nec free
that's all

It is the best method, it runs. Thanks

[GSMaxx]

@roboxss

hi matey,

just want to know if what kind of cable you used is it usb?is it modified?

tia,

[roboxss]

@roboxss

hi matey,

just want to know if what kind of cable you used is it usb?is it modified?

tia,

Yes it is the usb data cable.......and it is simply modified by me. Not is so difficoult.

Go here:
http://forum.gsmhosting.com/vbb/showthread.php?t=188443

[prabue]

gsmaxx

yes use usb cable , then alter like this , pin 4 & 5 short and pin 8, 9, 10 short

[Bangruppa Swami]

Here What You Need.......................

Namste Swami

i install it and after it i open it and then i open the nec free soft but it still asks for a key :mad: please swami explain the correct procedure .

Dhanewad

[adel11]

test it before thinking after that yo will think that it is correct


have you anything else to say --? :confused:

there is nothing to test :mad:

to different programms- :( :)

[topdinosaurs]

It is the best method, it runs. Thanks
other freind confirm that it work with armadillo

[Bondho Khondkar]

other freind confirm that it work with armadilloSalam borthor i install armadillo please tell me how to corectly use it for nec software step step please i thnkyou varymuch :)

[topdinosaurs]

1-install armadillo (with registry key)
2-lunch armadillo
3-at the same time lunch nec free
that's all

[Zerqo]

How this program use The Armadillo SPS?

[Pits]

TESTED SOLUTION! GABIZ_RO SOLUTION WORKED FINE WITH FILEMONKEY EVEN TRIED FEW OTHERS SOLUTION BEFORE! NO NEED TO FORMAT, JUST SET ALL WINDOWS FILES DATE TO 01-01-2005 AND SYSTEM CLOCK TO 24-01-2005 ET VOILÁ ! Big 10x :D

[polymar]

I lunch armadillo,than i lunch nec, but the problem is ever the same!Topd.please tell us the correct use and the total step to use this program

[sunnyc]

i AM TRY ALL MY PC ITS NOT WORK PLS HELP >>>>>>>> HOW TO USE THIS

BUT ITS WORKING AFTER C:/ FORMAT WORKING GOOD

[Bondho Khondkar]

1-install armadillo (with registry key)
2-lunch armadillo
3-at the same time lunch nec free
that's all

k borthor i've install armadilo 3.76 but i donot have register key for it :confused: borthor you help me .

[Pits]

SOFTWARE.PASSPORT.ARMADILLO.PROFESSIONAL.V4.00.005 3-Lz0

If you want i can host this soft for you all! Best Regards

[destinul]

Change atributes any files from windows to 24.01.2005
and Pc date to 25.01-2005

restart PC and soft work ok


many time tested from me

(steligsm thx to datamobile-team)

:D

[topdinosaurs]

the registry key is into zip files attached

[covtalk]

Does anyone speak english round here. WTF is amadillo. This is a help forum not a cluedo forum. If your gonna help then help, not just build up posts so that you can have an avatar!