sharp gx20 unlock - GSM-Forum

clinic*mobile · 01-29-2005, 06:57

Hi

how unlock sharp gx20

where i found correct shematic cable for gx20

i made cable but dont work with porogram ****** 3.1

br

thanks

www.clinicmobile.com

kaaniletisim · 01-29-2005, 09:24

test by KAAN-İLETİŞİM 100%100 ok

clinic*mobile · 01-29-2005, 09:35

THANKS for replay kaaniletisim

check with program but dont work

i think my cable have problem

do you have correct shematic

kaaniletisim · 01-29-2005, 09:41

gx 10 cable test ok

spguru · 01-29-2005, 09:42

Gx20 totally different then gx10.Only schem which works what you posted.expain what happens...cable pinout should be ok.

try v.i.l.a.n.i soft!

BR

clinic*mobile · 01-29-2005, 09:53

thanks spguru

is my shematic ok

i saw in shematic ****** that pin 3 not connect to gnd

but pin 9 connect to gnd

do you have correct shematic cable

br

spguru · 01-29-2005, 21:47

You must be talkin' about this pinout:

KEY PAD
-------
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16

pin 1 gnd (black)
pin 2 link to 10
pin 5 + (red) ext power +3..5V
pin 5 link to 12
pin 6 rx (white)
pin 7 tx (blue) open drain, connect 10k Resistor to pin5!
pin 9 link to 14

If so the pinout above is for Gx10/Gx10i for unlocking,flashing but that pinout above doesn't work with Gx20.I had that first then got problem with Gx20.I have modified the cable to the pinouts of your attached picture.Everything went fine afterwards.Use the soft I have enclosed that will work.Let it go,the process is about 2-3min it may look like not doing anything.Don't disconnect until it says OK otherwise the phone will be stuffed!You must use +5V on those pins,open drain on Rx-Tx by 10K resistors is important too!

GD luck

Remove txt extension from the end of the zip...

If didn't work you may want to try with gx10 pinout if wanted but I don't think that will work the other way around like mine.

clinic*mobile · 01-30-2005, 20:40

thanks for replay spguru

do i must be power on my phone when unlocking or must be off
how unlock plz help me step by step

thanks

spguru · 01-30-2005, 22:42

Quote:

Originally Posted by clinic*mobile

thanks for replay spguru

do i must be power on my phone when unlocking or must be off
how unlock plz help me step by step

thanks

See PM also don't ignore the 5V

BR

JAVA Good · 02-01-2005, 10:49

hello.

for unlock with this software it's easy, power on phone with out sim card, and clik on unlock, wait , the phone power off and the software tell clik on , clik on , and clik on seconde time, and wait 40 seconde, the software tell you the phone it's ok no, clik ok , and disconnect all.

after 5 or 6 run, the softwre tell me need registration, have solution with out register pls ?

some_info2010 · 12-26-2008, 17:46

thanx nice work can i used any device for flashing all shrap models

sabcom · 05-30-2012, 07:35

dear friend please help me to unlock 1 sharp gx20 step by step thank in advance

shahzaadbutt · 05-30-2012, 16:40

search forum its old story

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sharp GX20 - Unlocked - "Emergency Calls Only"	moonklash	Sharp	5	06-15-2005 05:54
sharp gx20 unlock code	RICSIL	Phone Unlocking Codes & Maps	0	11-21-2004 15:36
sharp gx20 unlocker by ******	stukachu	Sharp	72	10-24-2004 11:22
Sharp Gx20 Unlock Problem	GreekMobiler	Sharp	4	08-22-2004 16:47
Sharp GX20 unlock...no NCK code in list ....what to do??	boni	Sharp	5	06-08-2004 18:16

01-29-2005, 09:35	#3 (permalink)
clinicmobile Freak Poster Join Date: Feb 2003 Age: 47 Posts: 303 Member: 20833 Status: Offline* Thanks Meter: 5	THANKS for replay kaaniletisim check with program but dont work i think my cable have problem do you have correct shematic

01-29-2005, 09:41	#4 (permalink)
kaaniletisim No Life Poster Join Date: Aug 2004 Location: ==WORLD== Age: 49 Posts: 1,020 Member: 79065 Status: Offline Sonork: 100.1646746 Thanks Meter: 79	gx 10 cable test ok

01-29-2005, 09:42	#5 (permalink)
spguru Freak Poster Join Date: Jan 2002 Location: A O T E A R O A - Land of the long,white cloud Age: 47 Posts: 321 Member: 8985 Status: Offline Thanks Meter: 3	Gx20 totally different then gx10.Only schem which works what you posted.expain what happens...cable pinout should be ok. try v.i.l.a.n.i soft! BR

01-29-2005, 09:53	#6 (permalink)
clinicmobile Freak Poster Join Date: Feb 2003 Age: 47 Posts: 303 Member: 20833 Status: Offline* Thanks Meter: 5	thanks spguru is my shematic ok i saw in shematic ****** that pin 3 not connect to gnd but pin 9 connect to gnd do you have correct shematic cable br

01-30-2005, 20:40	#8 (permalink)
clinicmobile Freak Poster Join Date: Feb 2003 Age: 47 Posts: 303 Member: 20833 Status: Offline* Thanks Meter: 5	thanks for replay spguru do i must be power on my phone when unlocking or must be off how unlock plz help me step by step thanks

02-01-2005, 10:49	#10 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	hello. for unlock with this software it's easy, power on phone with out sim card, and clik on unlock, wait , the phone power off and the software tell clik on , clik on , and clik on seconde time, and wait 40 seconde, the software tell you the phone it's ok no, clik ok , and disconnect all. after 5 or 6 run, the softwre tell me need registration, have solution with out register pls ?

12-26-2008, 17:46	#11 (permalink)
some_info2010 No Life Poster Join Date: Feb 2008 Location: Muzaffarabad Posts: 716 Member: 695543 Status: Offline Sonork: 100.1602536 Thanks Meter: 149	thanx nice work can i used any device for flashing all shrap models

05-30-2012, 07:35	#12 (permalink)
sabcom Freak Poster Join Date: Jun 2007 Location: Mauritius ,Port Louis Posts: 103 Member: 528610 Status: Offline Thanks Meter: 4	dear friend please help me to unlock 1 sharp gx20 step by step thank in advance

05-30-2012, 16:40	#13 (permalink)
shahzaadbutt No Life Poster Join Date: Mar 2005 Location: Pakistan Posts: 6,101 Member: 123458 Status: Offline Sonork: 100.1594535 Thanks Meter: 3,421	search forum its old story