NEC3G unprotect for all

[euro_fon]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D

[cavite_devil]

Thanks ........................................ :D ;) :D




BR
c2r2

[Cler]

good soft ... thanks

[fez]

It ' s a direct unlocker ?

regards

fez

:) :) :) :)

[Patrick]

;)

Great work, but is it posible to use any Nec Usb cable with that program ?


:(

[BouRRi_GSM]

Thanks, Good Job,
Please post your test

[fez]

Please post also after tested, solder points diagram

regards

fez

[raino]

but link is dead

please snd the new working link

thanks

[fez]

try again it works good

[ldicdican]

the software needs COM1 port, how do we use USB cable for this?

please post here COM port cable schematics for this soft :(

[Patrick]

the software needs COM1 port, how do we use USB cable for this?

please post here COM port cable schematics for this soft :(
yes i need to know if it's possible to use the nec usb cable ? ? ?


:(

[ldicdican]

maybe we should wait for euro_fon's reply on our question regarding the cable to be use here :(

[fez]

yes sure, the soft automatically see usb like com port when you install phone drivers

regard


fez

[hoangminhtam]

good soft !
thanks .
But can u give particular Schema we can modify from usb cable ??

[Trainee]

it's working 100% on xp with modded cable tested on e228 , just hope not to happen same thing that happened with previous nec free which expired after a few days.

[ldicdican]

@fez,

thanks for your info! i have NEC-E313 phone to test with it. i will post here the result! :)
by the way, is the soft direct unlocker or it will give unlocking codes?

[midooo]

gr8 work man
thkx
br..........
midooo

[Patrick]

yes sure, the soft automatically see usb like com port when you install phone drivers

regard


fez
Thanks m8, i got the drivers here (http://forum.gsmhosting.com/vbb/showpost.php?p=969812&postcount=1), but i can't/don't know how to install them? :(

i reaf the PDF file and it says i need the CD-Rom :rolleyes: ... :confused:

[Patrick]

@fez,

thanks for your info! i have NEC-E313 phone to test with it. i will post here the result! :)
by the way, is the soft direct unlocker or it will give unlocking codes?
Great, i can't wait to hear your results !

I have a e313 to unlock too .

[ber747]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D
Great job but not working on e616V. The message was: Starting communication, loading application.......error

[yousha]

i think it requires SERIAL CABLE as it does not have usb support

[blaiseid]

This is not A NEWS,it s a MONTH OLD STORY,already FREE from Universal Simlock Remover.

Tested and Works on all 3G bellow v22.
It s a Codes Reader by Techgsm.

Salam

[Lucky7Napoleon]

THIS IS CRAZZY CRAKED !!!! wow wow wow wow !!!

ps but is not the upgrade craked anyway is working well!!!

good man!

[sunnyc]

thx its working wall i am unlocked 2 e313 good work thx 4 the goob cracked

[softmaster]

already have this long ago & now in hand nec direct unlocker, no downgrading ,direct unlock :D :D :D :D

[magic3]

good software thanks !.......

[Bernie]

Is it working only with USB or can you use Serial cable to?


Thanks

Bernie

[chowdary]

wow wow wow wow
everybodty seems so hapy with this cracked software
first of all it is not a DIRECT unlocker
IT IS A CODE READER
2ND it is the old version from crazzy unlocker where it had a problem to read the last digit of IMEI
so guys is good software for FREE as NEC UNLOCKER no longer works for everyone
BUT ONLY ADVICE I WILL GIVE IS THAT
BEFORE U PUT THE CODE IN THE PHONE JUST READ THE LAST DIGIT IMEI ON THE PHONE AND ON THE PROGRAM
ONLY PUT THE CODE IF LAST DIGIT OF THE IMEI IS SAME ON YOUR COMPUTER AND ON THE PHONE
OTHER WILL BE RISKING FOR BLOCKED COUNTER ESPECIALLY FOR V22
BR

[kingbode]

please can any one know?? wjat is the procedure to enter codes and does it need 3G sim....or what???

and for mod cable I should attach + to 5V and - to Gnd ???

please help??

thanks in advance

[boria]

This soft works only sometimes with older versions of software. This is the first version of Crazzy 3G unlocker and it reads wrong codes very often! Compare it with Nec free reader under win98 and you`ll see that codes may differ. Due to wrong codes you can block your handset and you`ll need direct unlock.

[teknotelgsm]

Thanks my friend

Good Job






Turkish Gsm Team ..........

[viho]

good software thanks !

[GSMaxx]

SUPERFRAGILISTICEXPIALIDOCIOUS!!!

thanks a lot man, works great on e228 :cool: :cool: :cool:

[SSTAN]

Tested under XP and E313-work perfect
Tnx for great work.
WBR

[luckyfahad79]

616v Codes 100% wrong .. enjoy Blocked phones :D

[gsmdreams]

Thanks guys, no more paying 1449 Euros hahahahahahahahh

[SR-sigma]

Thanks given soft ...................

[alfred62]

check emai before entering codes
check so the emai in the phone are the same as in the program
when you have reading them aut
Regards alfred_62

[babbu]

i have this software allredy but it have an problem to read imei of handset so make sour that the readed imei is same with handset befor entring codes.
B.R.

[nen77]

i dont think it is working with counter blocked phones or nec e338..
so i still have to use my pbb or credits..or my furios
nenmobil

[demic158]

i keep getting red flashing light and message MSG Err Wrt Adr Mx. help please?

[SPUNLOCK]

nice move by author


gr = go romania ?


:D :D :D


whoever released this we know who u are we have ur ip and we will hack ur pc but we will see that u use my soft instead if your own



:D :p ;)

[Patrick]

is this s/w compatable with the Nec usb cable ? ? ? ? ?

[kingbode]

any one tested on E616V ??

[Windziarz]

Always wrong reading IMEI:( last digit always diferent

All NEC I have here are unlocked so can't check the codes are right.

[chowdary]

please can any one know?? wjat is the procedure to enter codes and does it need 3G sim....or what???

and for mod cable I should attach + to 5V and - to Gnd ???

please help??

thanks in advance
U NEED NEC N8 MODIFIED CABLE TO MODIFY A CABLE OPEN THE END PLUGS IN YOUR PHONE AND MAKE THESE CONECTIONS
CONECT NR4 WITH 5 AND CONECT 7,8,9(THESE WILL BE JUST EMTY PINS) TOGETHER.
TO PUT THE CODES IN JUST PUT AS SHOWN ON THE SCREEN
MOSTLY U ONLY NEEDS CODES START WITH
#7320*xxxxxxxxx
#3210*xxxxxxxxx
xxxxxxx= codes that u get on that program
u might not hear anything while typing codes in it is because the key sound switched off
AFTER CALCULATING CODES ON THIS PROGRAM JUST THE IMEI NR ON YOUR PHONE AND ON THE UNLOCKING PROGRAM MATCHES IF NOT DON'T TYPE THE CODES IN U WILL BLOCK YOUR PHONE
BR

[kingbode]

7+8+9 or 8+9+10

pic of pinout says 8+9+10 ??

please correct this ...u make confuse for members!!!!

[nasjav1]

HOW DO YOU GET USB DRIVERS AND THEN ONCE DOWNLOADED WHAT DO YOU DO NEXT? NEED HELP! :confused:

[Patrick]

HOW DO YOU GET USB DRIVERS AND THEN ONCE DOWNLOADED WHAT DO YOU DO NEXT? NEED HELP! :confused:
check previous post in this thread, i put the link to the drivers . . .

but i'm having problems installing them :(

[BB-gsm]

Hmm...funny! That`s good but...it`s old news :D

Nec 3G unlocker (working on 2000/XP..etc) was released for FREE on 14.02.05 by TechGSM team!


BR ;)

[Patrick]

can someone give me a working nec unlocker for xp or 98se via the Nec usb cable :(

PPPPPPPPllllllllleeeeaaaaaaasssssss :)

[arash111]

can someone give me a working nec unlocker for xp or 98se via the Nec usb cable :(

PPPPPPPPllllllllleeeeaaaaaaasssssss :)
:D enjoy; http://forum.gsmhosting.com/vbb/showthread.php?t=189768 ;)

[fez]

ok boys someone have tried to unlock 616v??
Last imei number is different from the real.
What happening if i try to type codes ??????????


best regards

:rolleyes: :rolleyes: :rolleyes: :rolleyes:

[GSM MIND]

It Not Support E338 Model:(


Regards

Gsm Mind
Stand Alone

[Bypx]

This sw suck's

Better to buy code reader from spunlock.

[Denny_boy]

This soft can reset counter?

[arash111]

This soft can reset counter?
No, but it can change your IMEI :D :D :D

[Barkin]

Great work man.Thx a lot.

[mohd_anan]

aHa .. As I see it is crack for GSM-Key

Just becuase it is beta version and the send the activation by HardWare signature

Any Way U need Spunlock or Original GSM-Key

Thnks for sharing that news even it was little late

Enjoy Free Softwares

ANAN
KUWAIT

[nokia_dan]

very good tested on all very well cracked mate better than the last shamble

[FU_Too]

7+8+9 or 8+9+10

pic of pinout says 8+9+10 ??

please correct this ...u make confuse for members!!!!actually the pic is right its 8+9+10 but in actual plug you need magnify to see as solder tabs make it look like you say

[catik]

thanks great !!!!!!!!!!!!!!!

[Gsm_box1]

thanks very goooddd

waiting


gsmkey full cracked :D :D

[arash111]

thanks very goooddd

waiting


gsmkey full cracked :D :D
GSMkey? You mean CrazzyNec :D :D

[raino]

who has other link to download nec 3g unkoker work in XP?
This link can't download.

thanks

[ANUCHOPRA]

HI,
@RAINO
WORKING LINK http://www.unlockeasy.com/modules.php?name=Downloads&d_op=viewdownloaddetails&lid=617&title=Nec%203G%20Code%20Reader.
WBR,
ANUCHOPRA. :) :) :)

[sale]

main purpose of this soft is "phone blocked" and after that sell "cheap" solution for YOUR PROBLEM....so some of those people are moderators in this topic...hehe... :p ;) :D

[TaHiR]

this soft working 100% :):)

[ASHIF]

what are the main differences between this softaware and spunlock 1.2 software which has been expired after 25-1-2005...

[TaHiR]

the main difference is .:):) this software work 20-02-2005 still not exire hahaha

[ice_age]

thanks Good work man






Best regard

[sandokaan]

yeah these cracked softs block or kill your phone then you cry for help but don`t want to pay money for good solution!

Sad!

[idaadi]

@euro fon youre da man!~!!

[fez]

boooooh
I don' t understand if this soft work fine o not

regards

[MicrostarGSM®]

the main difference is .:):) this software work 20-02-2005 still not exire hahaha

then you will see your file day by day will missing untill u don't know

hehe

[mightyb]

Would someone plz confirm that this is how you should modify your cable... Its seems like i am having problems with either the cable or drivers.

http://img.photobucket.com/albums/v239/mightybb/nnn.jpg

thanks

[Hellas]

Would someone plz confirm that this is how you should modify your cable... Its seems like i am having problems with either the cable or drivers.

http://img.photobucket.com/albums/v239/mightybb/nnn.jpg

thanks

4->red
you make solder 4-5

[FU_Too]

Would someone plz confirm that this is how you should modify your cable... Its seems like i am having problems with either the cable or drivers.

http://img.photobucket.com/albums/v239/mightybb/nnn.jpg

thanksalso check with magnify glass as plug is deceptinve (the inside plug not the same as front)
and definitely connect 4-5 and 8-9-10.

[teleeng]

Hi all,

This is not direct unlocker. Only Code reader. Can't reset block Counter and
v22 dose not work. If downgrade from v22 to v17 or v13 nothing work.
I have still 15 Pcs block counter phone. And try all prosses. Below v18 working good with Xp. Direct Unlocker Coming very soon. I try without Hasp HL .
Thanks
Hamid
Tele Engineering
Bangladesh

[pitone02]

tested on nec e313 sv15, good.
works ok.

[fez]

tested on nec e313 sv15, good.
works ok.


Please let me know if last number of you imei was different from number soft get you

regards

:) :) :)

[mightyb]

ok, thansk for the help....

so that means it goes
2 4 6 8 10
1 3 5 7 9

[ROUGHNECK]

hi
you guys do good job for those
without much box.
pls remove the armadillo or timer
as its called

[GSM MIND]

what are the main differences between this softaware and spunlock 1.2 software which has been expired after 25-1-2005...

MATE ME JUST KNOW THIS THAT ITS WORK IN XP TOO;)

REGARDS

GSM MIND
STAND ALONE

[pitone02]

Please let me know if last number of you imei was different from number soft get you

regards

:) :) :)


no difference. same number

[Siemens man]

hi guys
this is soft can unlock e616v v22-25, and can unlock blocked phoes(reset couter)????
any one test it???
thanks

[Bypx]

hi guys
this is soft can unlock e616v v22-25, and can unlock blocked phoes(reset couter)????


No .

[chowdary]

hi guys
this is soft can unlock e616v v22-25, and can unlock blocked phoes(reset couter)????
any one test it???
thanks
forv22 and above use the downgrading solution
before entering codes make sure u match the imei on the phone with the software after calculating the codes
as it has a bug to read the last digit of imei
br

[globeroma]

thanks, Gooooood work man

:D :D

Best regard

[webiso]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D


hi man this soft ware not work man l m tryed nec e 616v but eroorrrrr

[MicrostarGSM®]

hi man this soft ware not work man l m tryed nec e 616v but eroorrrrr


hehe because crack version

[XteL]

hi man this soft ware not work man l m tryed nec e 616v but eroorrrrr


check and verify your port communication or check cable connection this software cracked work perfectly i have tested 100%

[szmit4]

for me works great 2x e616v v18

[evilspell]

take care with this cracked sw,you could kill your fone!!
Instead to earn 5 or 10€ ,you'll pay another fone to your costumer!!
Or you buy Spear sw or a cheaper one from "techGsm.com",it work very good.
take care !
BR

[SPUNLOCK]

why are mods advertisng other pruducts

i sell also direct unlocker unblocker very cheap in fact i am cheapest in world

[Lucky7Napoleon]

take care with this cracked sw,you could kill your fone!!
Instead to earn 5 or 10€ ,you'll pay another fone to your costumer!!
Or you buy Spear sw or a cheaper one from "techGsm.com",it work very good.
take care !
BR

just I can't understand price? over 1000 is crazy...
expecially without 338 support, and expecially after
Spear says... "We had the solution since 388, but
we don't want to loose money"...

???????????????????????????????????????????????
can't understand can't understand.......... :)

[Lucky7Napoleon]

with crazzy I unlock 95% of phone...

with HackeR server the rest and 338 !!!!

so.......... Spear has to change the price...
but I think he will not do it, because he is already earning a lot of money
so no need to try to sell more.... so let's go on like this and I think
I will never seen a copy of Spear!!! sigh............ I think I like that software..

[Denny_boy]

With 616v SW18 works wery well!!! Great soft!!! Thanks!!!

[bigboyat19]

great work boss
:)

[bigboyat19]

who hase scem/d for cable
so we can all test?

[Bondho Khondkar]

Salam Borthors i've Nec Modified cable which is working good on the Old nec free code read software . now borthors plese tell how to use this modified Usb cable with this good free software. becase when i open this sofware it display only com cables not any usb cables :confused: thnkyou

[stlan88]

Not working on sv17
After reading the code ok
I key in the code nothing happen..!!!
Maybe the phone is blocked..!!
Is there any solution..?

[almedin]

hello , where can i get tihs software and what do i have to pay for it , #??
are there any other solutions to unlock nec tels

[chowdary]

Not working on sv17
After reading the code ok
I key in the code nothing happen..!!!
Maybe the phone is blocked..!!
Is there any solution..?
HAVE U CHECKED IMEI ON THE PHONE AND ON THE COMPUTER AFTER CALCULATING CODES
IF IMEI MATCHES THEN COULD BE A BLOCK COUNTER
BR

[simlockmaster]

great work thx :) tested 100%

[khansb]

i need e606 testpoint

[mdshad1]

i need e606 testpoint


here it is
hope it will work for u

see u

[mightyb]

is there a way to fix the last digit missmatch? i downgraded to v17 and now the last digit of the code is different, when i use the software

[spoolman]

Many many thx to the poster for this. After hours of frustration trying to use workarounds on the 'date' expired software (armadillo,file monkey etc etc etc), this worked an absolute treat on my 616v v18.

Some info for other peeps in Spain....I first tried an Amena sim with no joy. Then tried another and it worked perfectly. Ist sim was about 3 years old I think. Second one slightly newer. Just persevere and you will get there!!

Mucho Gracias Amigos!!!

[Nokall]

work fine :cool: :D

[arash111]

work fine :cool: :D
Nice ugly photoshop job :D

[Nokall]

lollll :D :D software work but need a smal trick to repair wrong or temporary codes entered :p :cool: :cool:

[ldicdican]

lollll :D :D software work but need a smal trick to repair wrong or temporary codes entered :p :cool: :cool:

how did you do that "small trick" to repair wrong/temporary codes entered?

[Bobi]

For me work fine with E313 v00 and USB cable. But just on XP, on 98SE when phone is with battery always error, when phone is without battery program didn't see COM ports. Last digit of IMEI was different but codes work.

[Hellas]

e616v
sv 17 work fine
the last digit was diferent
but ... :D

[Bondho Khondkar]

lollll :D :D software work but need a smal trick to repair wrong or temporary codes entered :p :cool: :cool:

Salam borthor please tell me that trick :) i thnkyou varymuch in advance

[Bondho Khondkar]

For me work fine with E313 v00 and USB cable. But just on XP, on 98SE when phone is with battery always error, when phone is without battery program didn't see COM ports. Last digit of IMEI was different but codes work.

yes borthor you are alright this is no work in 98 it is not found any usb com port while in xp it is ok any idea how to make it work in 98 :confused:

[Trainee]

This is to demic1 58 , you need to pay attention on which model you are unlocking because if you try to unlock e616 with e616v selected on software it give error wrong address so try to pic the right one.

[spoolman]

Worked fine for me in Win 98SE. My drivers were already installed. Plugged in phone, white light, blue light etc. Drop down box showed it on COM8 and bingo! No problem with reading IMEI either.

[boria]

Last digit of IMEI may always be any digit. Even in nec free reader it doesnt depend what digit you enter at the end. Only 14 digits of IMEI are important in every mobile. The last one is something like CRC. In Siemens while changing imei you have to type only 14 digits and the last one is automaticly generated, so dont worry about last digit of imei but the fact is that this codes reader sucks. Very often it reads wrong codes. To get good codes you MUST NOT input any sim card.

[pedro7208]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D


It works fine on all models:D :D :D
It's true that the last 2 number it doesn't match but IT WORKS:D :D
Thank you very much

br

[Hellas]

can you help me?
What is this?????!!!!
The counter is blocked?
Error???!!

[luckyfahad79]

if u want 100% working Codes Pm me . Not Free but reasonable :)

[Bondho Khondkar]

Worked fine for me in Win 98SE. My drivers were already installed. Plugged in phone, white light, blue light etc. Drop down box showed it on COM8 and bingo! No problem with reading IMEI either.
salam borthor my driver also install already and i conect nec with cable white light,blue light etc. but i select dropdown box no com port there on which nec is installed :confused: any idea ? thnkyou

[skkeptik2]

hehehe

download exe from sp-unlock site
and use win hex trick with this data :

and you will have direct unlocker by ZUKI


name: dim

key: 000016-AMFAF4-URG0V2-KYJ1K3-79U5BB-NKWNKC-QJWAJA-7YXERM-CQWDAU-WYCVN

hwid: 3031-0CAB

[Essential GSM]

@skepptik2: What exe are u referring to?

Regards

[free_gsmx]

big thanks by eura fon

[Bondho Khondkar]

hehehe

download exe from sp-unlock site
and use win hex trick with this data :

and you will have direct unlocker by ZUKI


name: dim

key: 000016-AMFAF4-URG0V2-KYJ1K3-79U5BB-NKWNKC-QJWAJA-7YXERM-CQWDAU-WYCVN

hwid: 3031-0CAB

salam borthor please attach the exe file here . thnkyou :)

[lukasartsDon]

Does not work
Writes Time connection out and all)
I have tried all variants of the CABLE. Changed an insertion of it{him}.... All tried
Up to a back place!

[ackxxx]

can you help me?
What is this?????!!!!
The counter is blocked?
Error???!!

I don't now if counter is blocked!
But I resolved this problem with NECFREE(win98) :D
(today with e228)
BR

ack

[Hellas]

thanks ackxxx
will try your solution

[chuks]

Big guy keep it up ur already there.can we get the schematic diagram of the nec

[timihills]

wher can i get the free soft ware for down flahsing

[ldicdican]

wow wow wow wow
everybodty seems so hapy with this cracked software
first of all it is not a DIRECT unlocker
IT IS A CODE READER
2ND it is the old version from crazzy unlocker where it had a problem to read the last digit of IMEI
so guys is good software for FREE as NEC UNLOCKER no longer works for everyone
BUT ONLY ADVICE I WILL GIVE IS THAT
BEFORE U PUT THE CODE IN THE PHONE JUST READ THE LAST DIGIT IMEI ON THE PHONE AND ON THE PROGRAM
ONLY PUT THE CODE IF LAST DIGIT OF THE IMEI IS SAME ON YOUR COMPUTER AND ON THE PHONE
OTHER WILL BE RISKING FOR BLOCKED COUNTER ESPECIALLY FOR V22
BR

will downgrading/flashing the phone RESETS the blocked counter? :)

[timihills]

salam borthor please attach the exe file here . thnkyou :)
wher can i download it from

[yasirmcp]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D
not working message file correpted.i have e313 for unlock help me pls

[nobal1976]

NEC3G unprotect works on XP / 2000 / 98 for all here (http://www.schema99.host.sk/index.php?action=downloadfile&filename=NEW NEC3GR.rar) :D thanx my dear :) :) :) :)

[Bryx Dolby]

Nice soft and work for XP. keep it up bro.




BR

[~:Sujyot GSM Zone:~]

not working message file correpted.i have e313 for unlock help me pls
Try this one may it will work

[yasirmcp]

Try this one may it will work
it showing collecting data stuck on 1%,please give solution,i am trying in xp,i have nece313

[Hellas]

it showing collecting data stuck on 1%,please give solution,i am trying in xp,i have nece313
you can try this
http://forum.gsmhosting.com/vbb/showthread.php?t=191203&page=1
dounload the files from firs post

[ics_igrec_zet]

Nice soft, looks like furious a litlle :D
BR, xyz

[yasirmcp]

you can try this
http://forum.gsmhosting.com/vbb/showthread.php?t=191203&page=1
dounload the files from firs post
which cable i tried threw serial not detect,usb working?

[Hellas]

which cable i tried threw serial not detect,usb working?
USB modified
need solder pin 4-5 and 8-9-10

[Hellas]

which cable i tried threw serial not detect,usb working?
can see in this photo

[yasirmcp]

can see in this photo
same modify usb.but stuck 1% on message collecting data,ii am using with power on,and with battery,any diffrence?????

[Hellas]

same modify usb.but stuck 1% on message collecting data,ii am using with power on,and with battery,any diffrence?????
-First need to install the driver for your phone.
-Use the phone OFF
Link the phone at computer, when the led is blue you are ready to read code
If not work install the driver for your phone with the phone ON, after make the phone OFF and reinstall the driver.

[yasirmcp]

-First need to install the driver for your phone.
-Use the phone OFF
Link the phone at computer, when the led is blue you are ready to read code
If not work install the driver for your phone with the phone ON, after make the phone OFF and reinstall the driver.
when i conect phone led is yellow.and no selection for com port.and phone not detecting.sorry for u r time wast please replay

[Hellas]

same modify usb.but stuck 1% on message collecting data,ii am using with power on,and with battery,any diffrence?????
Control your phone if it have SIM or NET lock (with the SIM in)
SIM card lock *#4960# -if off you don't need to insert code if on need code
NET LOCK *#7320#-if off you don't need to insert code if on need code

How do it?Well, like this:
1.conect phone without battery
2.install driver
3.open soft and conect phone without battery
4.select com port manual
5.phone is conected and readed
6.disconect phone
7.enter your phone imei manual
8.soft generate codes
9.enter nck,spck
10 phone is unlocked
http://forum.gsmhosting.com/vbb/showthread.php?t=178900&page=6&pp=15

[yasirmcp]

Control your phone if it have SIM or NET lock (with the SIM in)
SIM card lock *#4960# -if off you don't need to insert code if on need code
NET LOCK *#7320#-if off you don't need to insert code if on need code

How do it?Well, like this:
1.conect phone without battery
2.install driver
3.open soft and conect phone without battery
4.select com port manual
5.phone is conected and readed
6.disconect phone
7.enter your phone imei manual
8.soft generate codes
9.enter nck,spck
10 phone is unlocked
http://forum.gsmhosting.com/vbb/showthread.php?t=178900&page=6&pp=15
my problem is usim code.if i enter 44444464 or 12345678 it will work and normal condetion.but after off and on again ask code.i want to unlock permenent.please help me

[Hellas]

when i conect phone led is yellow.and no selection for com port.and phone not detecting.sorry for u r time wast please replay
You tried to use the code reder?

[yasirmcp]

You tried to use the code reder?
i tried both.need power supplay in usb or serial

[Hellas]

i tried both.need power supplay in usb or serial
You need use the phone without battery.
Link the phone at PC and open the reader.
You already install the driver?

[leosedf]

Who cracked it? you Ellhnas? :) cool software

[yasirmcp]

You need use the phone without battery.
Link the phone at PC and open the reader.
You already install the driver?
i install driver in xp.but in 98 driver ask one file.needany power supplay for cable serial,usb?????

[yasirmcp]

You need use the phone without battery.
Link the phone at PC and open the reader.
You already install the driver?
:D yes it work and i got the code i enter the code my lock removed
than u for u r replay,u r suggection very helped me.once more than u :D
and thanks for all member to help me

[joea1]

I'm going to try this with my e616v on XP.....

[yasirmcp]

gi have a problem in nec E313
before it is a locked phone,after unlock i am not getting network
before i unlock e313 it is work good in here but this is not worked
i think it is any setting problem,if anybody can help me please give a helpfull replay