unlock TS21i without flashing and testpoin

[dzunlocker]

Hi all,
Ill present here new-old solution for ts21i. No need tespoint, no phone flashing.
The old solution consist to frash phone by making testpoint. U ll find it in old posts this forumprocedure here :

But flashing and tespoint are dansgerous. And flash R/W process is too long.
Now with this new method, we can unlock phone in less 1mn.

A - Toshiba ts21i cable :
B - Toshiba R/W flash soft TTPCOM flash 430
(Search soft and pinouts in this forum)

1- Connect cable to powered-off phone without making tespoit
2- Launch soft and configure it :
a - Choose com port baud rate 57600 and master cloc 1843200
b – Click file browse button and shoose backup directory and name in
this example
c – Click on specify range adresse and set :
Start to 0x007FE000 and End to 0x007FE010

d - Click on start, when soft says "Power On/rested target" press phone's power buttons and hold it down until reading process terminate.
3- Now open backup file with a text or hex editor. U will find CODE in plain text chars from position 8 to 15.
- Now power on phone with an unnaccpeted simcard and and when asked, introduce the code.
- Phone says "switch off phone". Switch off phone and on again. Now phone is un locked.

[zaskar]

thx
i'll try with next one...

[weirdlock]

Nobody has any results on this yet?

[TheMasterGSM]

:p :p I never used Testpoint :p :p





br
:D

[Murat Bekar]

solution working. I tested yesterday.
Regards

[atlasgsm]

i tested and it work only enter spck and all is ok

but must do test point

br

[matrix05300]

Hi all,
Ill present here new-old solution for ts21i. No need tespoint, no phone flashing.
The old solution consist to frash phone by making testpoint. U ll find it in old posts this forumprocedure here :

But flashing and tespoint are dansgerous. And flash R/W process is too long.
Now with this new method, we can unlock phone in less 1mn.

A - Toshiba ts21i cable :
B - Toshiba R/W flash soft TTPCOM flash 430
(Search soft and pinouts in this forum)

1- Connect cable to powered-off phone without making tespoit
2- Launch soft and configure it :
a - Choose com port baud rate 57600 and master cloc 1843200
b – Click file browse button and shoose backup directory and name in
this example
c – Click on specify range adresse and set :
Start to 0x007FE000 and End to 0x007FE010

d - Click on start, when soft says "Power On/rested target" press phone's power buttons and hold it down until reading process terminate.
3- Now open backup file with a text or hex editor. U will find CODE in plain text chars from position 8 to 15.
- Now power on phone with an unnaccpeted simcard and and when asked, introduce the code.
- Phone says "switch off phone". Switch off phone and on again. Now phone is un locked.

A smart Hack, Thanks man
this change little bit from a rediculous "give me one click-and-go way" ;)

BR,

[prabue]

what is the pinout - need external power or not

it is possible to convert t205 cable for toshiba

test point need or not

[Bigbrothers2000]

it is possible to convert t205 cable for toshiba




yes is possible you can use it but must convert first

[prabue]

what is the pinout , need external power or not

[GSMSERVE]

So long and also dangerous... don't you find it so??

BR weld bladi
simplex

[BouRRi_GSM]

Pinout TS21i
Tested

[souzz]

I searched through the forum and can't find the
"Toshiba R/W flash soft TTPCOM flash 430"
Please, can anyone give me the link?
Thanks!

[equinoks]

I searched through the forum and can't find the
"Toshiba R/W flash soft TTPCOM flash 430"
Please, can anyone give me the link?
Thanks!

you can take it from HERE (http://equinoks.gsm.free.fr/GSM/Toshiba/)!

BR.

[souzz]

you can take it from HERE (http://equinoks.gsm.free.fr/GSM/Toshiba/)!

BR.
Thanks a lot.

To All:
Some ideas for changing the language packs in TS21i firmware?
it there exist some info about format of langpack for Toshiba?
i need to add language into firmware.

[prabue]

without testpoint not working , i have hold the power button but mobile swicthing on

any other way without testpoint

[Rise]

@dzunlocker
good solution
i can't try but if i caught this set then i will try
because in hex solution many sets we unlock and troubleshoot through these procejure but maximum person can't go difficult way , maximum person need easy solution but this is logical and experimental work
i hope it will work

[nono38us]

Thx a lot bro i'ts work 100%. I use it

[Rahuman28]

Hi all,
Ill present here new-old solution for ts21i. No need tespoint, no phone flashing.
The old solution consist to frash phone by making testpoint. U ll find it in old posts this forumprocedure here :

But flashing and tespoint are dansgerous. And flash R/W process is too long.
Now with this new method, we can unlock phone in less 1mn.

A - Toshiba ts21i cable :
B - Toshiba R/W flash soft TTPCOM flash 430
(Search soft and pinouts in this forum)

1- Connect cable to powered-off phone without making tespoit
2- Launch soft and configure it :
a - Choose com port baud rate 57600 and master cloc 1843200
b – Click file browse button and shoose backup directory and name in
this example
c – Click on specify range adresse and set :
Start to 0x007FE000 and End to 0x007FE010

d - Click on start, when soft says "Power On/rested target" press phone's power buttons and hold it down until reading process terminate.
3- Now open backup file with a text or hex editor. U will find CODE in plain text chars from position 8 to 15.
- Now power on phone with an unnaccpeted simcard and and when asked, introduce the code.
- Phone says "switch off phone". Switch off phone and on again. Now phone is un locked.


I had a phone for the last two months and was trying in the RiP RedBox but could not get it booted up or Read Codes. Fortunately I broused the Forum and came accross of this thread. Got that phone unlocked very easily. However the praises should go to "dzunlocker" for giving the method.

WBR

[zaskar]

i tested and it work only enter spck and all is ok

but must do test point

br


TESTED!
DON'T NEED TEST POINT - JUST PRESS POWER and hold it

:)

[Jani-Jan]

yes it is working i just try now it is working 100%% good solution...

[Abishalom]

thnx alot bro the solution is working 100% dzunlocker u are good thnx also to all forum members