View Full Version : New nokia all hardvare solutions
Pages :
1
2
3
4
5
[
6]
7
8
9
10
11
rajiv007
11-08-2005, 12:26
Hi all
Plaease can someone help me.
When i turn my nokia 6600 on the NOKIA pic is upside down (Black text) and yellow background. Then the screen stays blank.
Phone works but can't see what you are doing.
Anyone know how to fix this?
Cheers
Bluedav
change lcd display and post result
travolta
11-08-2005, 12:50
6020 no display & key pad light
plz give me sluation
set water damage
plz be quikly
thxxxxxxxxxxxxxxxxxxxxxxx alot
i have the same problem too,plssssss some1 help us out.
zakopiec
11-08-2005, 14:55
If part aroung connect charge is good we must change UEM?
thx
flash IC or UPP----------------------
mostly if flashing go's above 70% its the flash (wih this error mesage ;) )
I have a Q
with 6230 wen the bleuthoot don't work
somtimes rewriting helps
somtimes TQ
but then if it stil doens't work i trey'd bleuthoot module but it stil the same after wards
wat can i try ?
its like this if you try to put on the bleuthoot you see back in the menu and its back on off ????
change lcd display and post result
Cheers for your reply
How do i go about to change the lcd screen?
sevgigsm
11-09-2005, 00:57
hi sevgi i think flash 100%
7210: box error code!!! unkown flaş manıfacture
repair: flash ıc chnage
error same
UPP change problem ok??????
tested %10000000000000000000000000000:confused:
for ıt %50 %50 THE TEST WAS THE TEST WAS
neilthirumuttam
11-09-2005, 03:37
try to flash with latest file
if not getting ok
may be uem
kingbode
11-09-2005, 14:27
any one has 6260 Service Manual link??
zullu2004
11-09-2005, 16:39
how about some photos for Nokia 3100/20 with problem bad earpeace
thx for great photos
good work all
lareionutlare
11-09-2005, 17:56
i need soultions for my 8910
schematic for hedset (ways)
BillSalih
11-10-2005, 13:49
?????????? uem problems change it ( or UEM strong make ask rpl....)
READ
http://forum.gsmhosting.com/vbb/showpost.php?p=1093021&postcount=1
İf u phone 15 between 30 second PHONE AUTO SHUT DOWN u have bad uem, it Fault change it and write rpl..
İf u see İMEİ ???????? or ?????????4 and phone 1 mın normal working (not auto shut down) so first try Griffin and read ask if Griffin İMEİ true (look back case) read it so u can make ask to RPL and u can write rpl (for original İMEİ.. But u want if try any rpl but it do imei change.. ( I write 1100 İMEİ ??????? any rpl without ask to rpl or without change Uem with griffin)
You phone 1 mın normally working but griffin read 00000000000 ask you no make ask to rpl becuse you UEM FAULT change it (but try write any rpl may be you in lucky day)
Can some one tell me if RPL Cina PCB Or Uro rpl wil work on 6170 Uem or is there a differnt Rpl pack i need yo dwn load.
I havetried both of these packs with Twister and itwill not wright. but New uem seems ok?
Please help
Thanks
Bill
blaiseid
11-10-2005, 20:47
I ve got a Nokia 8800 Top Left and Right Key not Responding.And no Back Light.
Looks like Moisture damage.I tried to Clean the Keypads contacts but still not responding.Even if i use a metallic object to make contact still, the CANCEL button and the Top left Cant respond.
Any idea???
az cells
11-11-2005, 08:09
PLEASE HELP
i have problem n-gage bluetoot system err and shoing wihout MMC memory card cruoppted format memrt card any ideya??
please help
MAMAMOBILE
11-11-2005, 13:28
PLEASE HELP
i have problem n-gage bluetoot system err and shoing wihout MMC memory card cruoppted format memrt card any ideya??
please help
is it water dammage........................................... .............
MAMAMOBILE
11-11-2005, 13:29
how about some photos for Nokia 3100/20 with problem bad earpeace
thx for great photos
good work all
which kind of problem write clearly
ebuy_queen
11-12-2005, 01:16
Please tell me how to flash a nokia 7710, step- by step procedure and please advise me of the equipment that i need, it would be greatly appreciated, hit me at tasha@tmail.com
blaiseid
11-12-2005, 08:55
I ve got a Nokia 8800 Top Left and Right Key not Responding.And no Back Light.
Looks like Moisture damage.I tried to Clean the Keypads contacts but still not responding.Even if i use a metallic object to make contact still, the CANCEL button and the Top left Cant respond.
Any idea???
The LED is OK now.
R306 was faulty.
Still woking on the keys.
6630 can't save battry but show charging
how to solve it ??????????????
Sir Sevgigsm!!!! i have set of 1110 that have show "insert Sim" problem, has been try unlock by serveral software box but still the same, has use the unlock code generated by ufs and show "phone not restricted" show, so i think is a hardware faulty.... need ur help Sir!!!!!
pls help!!! Thx in advance!!!
i have the same problem too,plssssss some1 help us out.
try to replaced the flexy cable and post the result...
I have a Q
with 6230 wen the bleuthoot don't work
somtimes rewriting helps
somtimes TQ
but then if it stil doens't work i trey'd bleuthoot module but it stil the same after wards
wat can i try ?
its like this if you try to put on the bleuthoot you see back in the menu and its back on off ????
try to use software box like JAF to repair bt and post the result for sharing...
please help me
nok.6230 no light.
i change chip z301 but problem is still here
have u check the X300 and is the keyboard is in good???
btw if that 2 mathor are in good... it mean the UEME faulty...
and have u check the circuit connection between Z301 and X300???
pls post the result for sharing..... thx
so my friend what i must do ? i flash it =nothing
i Unlock simlock=nothing
what i must do with ufs ????
Brother!!! coz the 6020, 1110, 1600 in simlock they all show "insert card" so we are hard to specified is that a sort or hard ware fault.... : ) btw i have found out a way to test it... just use the ufs to get the info and it will show all the posible unlock code, right??? try to choosed any 1 and if u see the result show "phone not restrict" then it should be hardware fault and the altenative.....
for solfware just used the latest ver. flash it and unlock it should be ok ( must use 1.3m ver.) !!!
: ) if hardware fault.... :) pls ask MR sevgigsm...
az cells
11-13-2005, 13:19
mama ji sasriykal
i cleaned it and checked in hardwere and all
whats the problem please
cellsolution
11-13-2005, 15:19
2600 local mode problem---------------------------
Thanks for this support but i did & removed Lcal Mode from 2600 but now it's showing insert sim ple help:confused:
power1977
11-13-2005, 21:58
Hi--- I have 2 peace of 6600 with ufs switch in to normal mode OK but with battary just white screen have any idea? any one? :(
aplus_mobile
11-13-2005, 22:21
Dear Friend
I would like to ask about a problem which is in Nokia 6600.
when i try to open the gallery it shows the message opening but it doesn't open.
can any one help me about this?
aplus_mobile@yahoo.com
OLYMPIOS
11-14-2005, 09:50
Hi--- I have 2 peace of 6600 with ufs switch in to normal mode OK but with battary just white screen have any idea? any one? :(
FRIEND TRY TO MANUAL fORMAT AND REPLY
OLYMPIOS
11-14-2005, 09:51
Dear Friend
I would like to ask about a problem which is in Nokia 6600.
when i try to open the gallery it shows the message opening but it doesn't open.
can any one help me about this?
aplus_mobile@yahoo.com
I HAVE THE SAME PROBLEM WITH 6230 OPENING THE GALERY AND IS EMPTY I FLASH EVERYTHING
power1977
11-14-2005, 15:45
[quote=OLYMPIOS]FRIEND TRY TO MANUAL fORMAT AND REPLY[/quote
i tryed all tips of format manual and with ufs and jaf nothing helped--- flash and pm not help....
one 6600 send /end /clear & 0 key r not working :confused:
rajiv007
11-15-2005, 13:13
one 6600 send /end /clear & 0 key r not working :confused:
try to heat key pad flters if not then change key pad strip
christal
11-15-2005, 14:25
@ aplus mobile
can not open gallery and open file manager... cek your bluetooth module, if it faulty, try to reheat first if still does not work chage the black square ic (not the one similar to radio ic) inside the bluetooth module, or just change the whole block
christal
11-15-2005, 14:30
@ power1977
try to replace one black ic near the battery connector, on top of the glass one(not the glass one) sorry i do not know the name. it works also for other wd2 phones with this problem
sevgigsm
11-16-2005, 23:37
2650 sim ways-------------------------------------------
I had a friend that dropped his phone in water. The next day he brings it to me to fix. Well, I open the phone and see water corrosion on the pcb. I drop the it in the ultrasonic cleaner and voila all corrosion removed. used a hot air gun on low heat dried uo the pcb. Now when i put the phone together it the lights turn on but no screen graphics show:confused: . OMG. $1000 phone just got wrecked:eek: . Someone PLEASE :o PLEASE help me, i cant afford to replace and should have not bothered, but i wanted to open the phone up.
Thanks
az cells
11-17-2005, 06:35
8800
Dear friend replace the display and check wahats actual problem
THNAK SIR I HAVE PROBLEM NOKIA 6600 BOOT ERRR
1st Boot Err: Bad Resp UPP, 03 00 00 72
1st Boot Ok
1st Boot Err:
Rebooting Mobile
PLEASE HELP
@adelking
Its flash IC problem, rehot all the flash IC with mid heat if not solve reball if still not solve change with new one but you have to find which is damage.
Triminity
11-18-2005, 15:01
I need 6310i vibrator way.
pabloo81
11-18-2005, 15:51
I need 6820a sim ways.PLs
HI,
Please any one i need urgent help !!!
I WAS FLASHING A NOKIA 2300, I CONNECTED THE PHONE TO THE TWISTER AND AFTER A SECOND I SOW SPARKS COMING OUT OF IT , THEN I OPEN THE BOX AND THERE ARE TWO DIODES WICH GOT DAMAGED I HAVE CIRCLED THEM IN THE PHOTO BELOW PLEASE CAN ANY ONE TELL ME THE NUMBER ON THE DIODE SO I CAN REPLACE IT OR ANY SOLUTION FOR IT ILL BE THANKFUL
OR ANY OTHER WAYS I CAN CONNECT ONE BOX LIKE UFS SINCE TWISTER IS HAVING TWO BOXES . ( THE BOX I DAMAGED IS THE ONE WHICH YOU POWER 5V) THE OTHER BOX IS WORKING WELL :confused:
sevgigsm
11-19-2005, 21:37
8800 led drivers-----------------------------
lcd and key led drivers
kingbode
11-19-2005, 22:34
6020 LCD goes and comes ...like TV screen
I have no Schematics...LCD works fine..tested on another phone..
is it RAM? or what??
plz need help in 3200 not charging
and
when i switch it on it work for about 10 sec after that it show wait... for 1 sec then it go off
can any one help
ObiWanTamad
11-19-2005, 23:25
sevgi,man, you really exceed all my expectations! you seem to have all the answers to all the mobile troubles i am encountering! more power man!
ObiWanTamad
11-20-2005, 00:30
sevgigsm, i just read ur "wanted repairman" post, you got me there man,i laughed my lungs out!:D :D ;) :D good day to you!
khanmobilez
11-20-2005, 18:28
3310 keypad light on when i insert battery into phone
khanmobilez
11-20-2005, 18:30
3310 keypad light on when i insert battery into phone can any one solve this problem pleaz reply me?
Hi To All Members Im New Here!!! Hope To Be Helpful Here Amd More Learning Outcomes Belongs Here.thanks For Help Sevgigsm...
baraka42
11-21-2005, 10:22
@ khanmobilez,
check- replesh ui ic N400.
w.b.r.
sheikhje
11-22-2005, 11:26
welcome leo.com.i hope u get big information from here and stay long time
virusoiul
11-23-2005, 11:10
hi i have a problem with a 3200, when i enter the camera, the display becomes dark blue, but i can make photos (blind and the photos i can see them just after repowering the phone), and if i want to quit camera , the only way is to repower the phone, can you help me pls?!?!
virusoiul
11-24-2005, 13:41
2600 not chargeing (when i connect charger it tells me "not chargeing" do you know the ways for this, or how can i solve my problem ?
sajidali
11-24-2005, 16:10
i have 2 8310 sets all flesh ok in twister box but after flesh not show loclemode and not UIsetting
change lcd display and post result
Didnt change lcd display, it is now working again. I now have insurance incase it happens again
sonde_25
11-26-2005, 14:32
good eve everybody please help me my ( 7260 phone restricted and no imei ??????????) please give me some solution thanks and more power!!!!!
power1977
11-26-2005, 16:42
@ power1977
try to replace one black ic near the battery connector, on top of the glass one(not the glass one) sorry i do not know the name. it works also for other wd2 phones with this problem
Thancks bro i will try this solution
;)
can any one help
i want N-GAGE key ways
can i get it from any body
Thanks A Lot For All Soulotions I Think Thats Very Good Soloutions.
Best Regard Moon-gsm Pakistan
remove sim card trey in side memory card ic replace set ok
kingbode
11-29-2005, 08:26
2600 having problem in charging...if short circuit happened in the charging circuit to charge directly..could this affect netowrk...now no network!!!!!
any help
paiqhar 3310 phon problem please
phto 3310 phon problem please daed
rajiv007
11-30-2005, 18:43
phto 3310 phon problem please daed
what you want.....................?
rajiv007
11-30-2005, 18:46
2600 having problem in charging...if short circuit happened in the charging circuit to charge directly..could this affect netowrk...now no network!!!!!
any help
no not at all but if uem faulty that time u will get faulty bcoz charging and network both are in uem
kingbode
12-01-2005, 14:02
@rajiv007
so now I removed all bad short circuit that mentt o make stupid direct charging nad still no network!!!
and the UEM get heat while phone is working..is it due to ?
1- partially damaged UEM?
or
2- there is component that is shorted and draw big current from it..
any one can help r face such problem before ???
and is there any schematics for charging circuit from the begining to the UEM to trace if there is any element that may gone shorted..
astralis
12-01-2005, 16:15
I need nokia 6170 key ways, please!
mattakins
12-01-2005, 22:09
mama great master i really commend u for your immense efforts being put together for all on this forum in ensuring that we green and upcoming engineers are also have somethings to show for it i really appreciate you and kindly please keep it up Almighty *** the unfathomable one will continue to upgrade your knowledge in Jesus name i would like to urge you to please dont restrict yourself on only common phones i urge you to please also be punctual on phones like SAGEM LG BIRD MAXON PANASONIC and more like that i.m a nigerian however you know we have very nemerours phones like that that have no solutions for them
thankz i would be looking forward to seeing changes
SIRGKASH
12-03-2005, 17:35
:confused: New nokia all hardvare solition
or for what problem ?
SIRGKASH
12-03-2005, 17:42
New nokia all hardvare solition
for 7610 white LCD problem what to do ?
farrukh mobiles
12-04-2005, 09:18
have any one solution about nokia 3100 dead after flash. flash file 100% ok tested other 3100 mobile. problem is flash ID ok but not Ul setting done. message desplayed on twister Ul setting fail. now phone is dead.
Have any 100% tested solution Mr. sevgigsm
thanks in advance
Farrukh mobiles.:confused: :confused: :confused: :confused:
Albelektronik
12-04-2005, 15:00
Thank You man, nose job.
Have any solution for 3100 insert sim ?
2100 microfon
BR; AT
neilthirumuttam
12-05-2005, 03:06
[QUOTE=farrukh mobiles]have any one solution about nokia 3100 dead after flash. flash file 100% ok tested other 3100 mobile. problem is flash ID ok but not Ul setting done. message desplayed on twister Ul setting fail. now phone is dead.
Have any 100% tested solution Mr. sevgigsm
thanks in advance
is it turn to local ma=ode after flashing?
if not u cant set ui
in local mode ui fail is hard pblm may flash ic
Yo Carlos
12-05-2005, 07:40
Any solution for 6600 restart problem?
daniboy1
12-05-2005, 14:09
Hi, Can anyone please tell me how to get the sound working through the speaker on the nokia 6230i as it seems have developed a fault all else works dialling out, recieving calls but no ringing sound, much appreciated
astralis
12-06-2005, 16:59
for 7610 white LCD problem what to do ?
some keys doesn't work
i need a solution for Nokia 2100 micro
farrukh mobiles
12-07-2005, 07:54
Hi SEVGIGSM ,
what's solution for this problem in Nokia 3100
1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x017FFFFF,0001277E,Amd 29BDS064J
Algorithm: u_amd.fia
Algorithm Ok, MSID: 849B5B99852C346722D707A86C
Decoded MSID: 8575BAE9-00D10BDA-AA000000
Encoded FAID: 5652853C-ED0E164B-52A9889F
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x0154FFFF Erased, Time: 00:44
Area3: 0x01680000-0x017EFFFF Erased, Time: 00:11
Area4: 0x01EB0000-0x01FEFFFF Out of Chip Bounds
when stop after this messege desplayed
unexpected Exception: FT_Write - General IO Error
waiting your solution.
Farrukh mobiles:confused: :confused: :confused: :confused:
mas comm
12-07-2005, 10:48
Hi SEVGIGSM ,
what's solution for this problem in Nokia 3100
1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x017FFFFF,0001277E,Amd 29BDS064J
Algorithm: u_amd.fia
Algorithm Ok, MSID: 849B5B99852C346722D707A86C
Decoded MSID: 8575BAE9-00D10BDA-AA000000
Encoded FAID: 5652853C-ED0E164B-52A9889F
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x0154FFFF Erased, Time: 00:44
Area3: 0x01680000-0x017EFFFF Erased, Time: 00:11
Area4: 0x01EB0000-0x01FEFFFF Out of Chip Bounds
when stop after this messege desplayed
unexpected Exception: FT_Write - General IO Error
waiting your solution.
Farrukh mobiles:confused: :confused: :confused: :confused:
plz check ur box power cable, or retry to reconnect power cable then connect it again and then try to flash it again, may be ur problm ll be solved with this way. regards:)
7610 operater not found . help pls
6020 nokia - no lights.
Enybody have a solution?????
Thx
Buhvald
7210 keypads notworking
changed the small keypad control ic, no help
any ideas please
regards
Tetouan Gsm
12-09-2005, 00:47
Message : Default charge .., i have one board without R100 ..still n o charging..i need Help ..? and all thnx
supremegsm
12-11-2005, 16:51
7710 Strange Problem
Dear Friends
Nokia 7710 handset keeps blinking and indicates low battery even if a full charged battery is inserted with Sim card inserted. But without simcard the handset switches on Ok.Please suggest EXperts.
Regards
supremegsm
12-11-2005, 16:54
I have updated the Software already but there is no result.
6600 menu is not working. pls sent any solutions....
6600 menu not working. pls send solutions
7610 keypad 1,4,7 not working.pls send solution
http://img210.imageshack.us/img210/5930/7610keybadproblem2nz.gif (http://imageshack.us)
http://img211.imageshack.us/img211/1993/7610keypadfilter1kn.gif (http://imageshack.us)
affordablemobiles
12-13-2005, 02:55
Hi Everyone,
I have a nokia 5140 on my bench which has had liquid damage.
After ultrasonic bath etc.. phone now works but when charger is attached it beeps and comes up saying "not charging". Is there a charge ways solution?
Anybodys help would be greatly appreciated.
Thanks
j_prakashh
12-13-2005, 15:35
need solution for 3120 hanging ....its restarting and hanging when power up ...sometimes it will work for 10 mins...
byteforce
12-13-2005, 18:11
I have the exactly same problem. Can somebody help me out with some advice. thanks
i have a nokia 7600 its lcd not display any thing but when i insert charging pin and restart set lcd working ok what is this problam ? plz any solotion with picture ,urgent need
Hi Everyone,
6600 speaker, micr. and buzzer dont work
thanks
hi to all my scientist,i need help for nokia 2600 after unlocking and i put chip inside it and power it and show on sreen test mode.i have fash it but still same problem.pls i need help
thanks for the great job
bye have a nice day
j_prakashh
12-14-2005, 06:14
just clean audio ic and reflow
j_prakashh
12-14-2005, 06:16
just check inner keypad tracks and connecter between board and disply
vhbindia
12-14-2005, 08:46
Great job
just keep it
on the good work.
br
vhbindia
karnataka
12-15-2005, 21:11
i have nok 7200 with ringer not working can any help me?
doc_drey2000
12-16-2005, 19:10
nokia 6230 no signal but when i do manual operator select it can recognize the operator.
Hi all.
I have Nokia 3120 water damage. I clean PCB, reflow all Smd but i still can`t flash this phone. When Twister erase mcu it stops about 36% and says:
Erasing Error: 8, at: 0x01200000-0x0121FFFF, Time: 01:32
Ppm flashing goes ok. I try all Fia files from support and nothing.
Please someone help me solve this problem.
Ps. Sorry for my english :D
New nokia all hardvare solition
need 3510i sim ways but dont understand this schematic well can someone post a clearer pic for me?
br
pls give 6681 power on-off switch ways
blue_life1111
12-20-2005, 17:25
6260 key pad ways and keypad ic any idea?
potzilla
12-20-2005, 23:52
do you have a solution for keypad on 7610 or keypad ways manual?
I have very big problem with Nokia 7600. I can't send anything to phone memory except java and ringtones. In PC Suite file manager when I try to access Phone memory (A:\) it comes an error. Need help badly!!!! Any solution without flashing the soft?
snipergsm
12-22-2005, 19:17
3100 6100 led solut1onnnnnnnnnnnnnnn
sory sevgigsm team :(
without permission upload for
thanks for reply ! problem solved;)
snipergsm
12-22-2005, 19:18
3100 6100 led solut1onnnnnnnnnnnnnnn
thanks for reply ! problem solved;)
6610 no earpiece and mic volume while call. please help meeeeeeeee.
Thx in advance.
Tetouan Gsm
12-22-2005, 22:44
just change a Condensator..in the picture Good luck .. ;) am not a good painter héhé but i try to be :D in the future why not..
I already tried the solution in this forum, but still no luck on reviving the signal problem.
Please have a look on the picture. I ahve change all this parts. But still no network.
Tetouan Gsm
12-24-2005, 18:54
just change a Condensator..in the picture Good luck .. ;) am not a good painter héhé but i try to be :D in the future why not..
the picture it's not for SIm card 6610 but is for 6610i sel restarting..and sorry for mistake:p
abel peter
12-24-2005, 23:23
how can one solve problem of insert sim in nokia 3310
sevgigsm
12-24-2005, 23:51
how can one solve problem of insert sim in nokia 3310
--------------------------------------------------------------
Begato2002
12-25-2005, 16:50
Thank's alot sevgigsm
BIGJAZZCY
12-25-2005, 17:01
pls can get ways 4 7200 any body
i changed imei with tornado ufs3 in write uem
asic2
asi5
asic6:confused:
.::Tech2SL::.
12-26-2005, 19:09
I got no service 3100 from customer.
I have resolved the halgo ic, after that phone is not power on and not connecting with ufs. Then I have replace the PA also but phone is still not power on.
I have to return back the phone with working condition.
Please give me the idea to phone's get back alive.
Thanks in advance.
Dear Mr Sevgi,
Nice to meet you..., would you like to explaint to me about small IC and the coil beside UEM? these part had made my 6600 get hot. please... I had replaced the coil and take out the small ic. What should I do please..
Thx
Rgrd
IYAD
united_mobile
12-27-2005, 23:17
Dear Sevagi
Please I need a help Ihad a 3510i i was changing led then it turn off (no Power) Please Help me
Thanks
farrukh mobiles
12-28-2005, 12:43
dear sir,
have any Unlocking solution Nokia 6680 6630 n90 n70.
please reply me as possible.
ashok_kumar459
12-29-2005, 09:24
try with new flash file6.01 vfor3100 after flashdead......
Hi,
i need nokia 8910 flat conector ways and vibra ways, cos my vibra not working, flat is ok, i test it on another n8910i
best regards
Fozno
Hi, plz my nokia 6260 have after turning on just white screen, dont You have idea, where can be problem. Thank You soo much Regards Olie
naughtycell
12-31-2005, 13:06
Hi, plz my nokia 6260 have after turning on just white screen, dont You have idea, where can be problem. Thank You soo much Regards Olie
What is the cause ?? fall on the ground or water or itself ? .
And did U tryed another LCD ?
And if it goes ON it works ? mean sends and receives calls ?
naughtycell
12-31-2005, 13:10
I got no service 3100 from customer.
I have resolved the halgo ic, after that phone is not power on and not connecting with ufs. Then I have replace the PA also but phone is still not power on.
I have to return back the phone with working condition.
Please give me the idea to phone's get back alive.
Thanks in advance.
It is the HELGO chip because when it stops ( damaged or desolderdes ) it stops conducting clocking to the rest of the phone !
naughtycell
12-31-2005, 13:13
dear sir,
have any Unlocking solution Nokia 6680 6630 n90 n70.
please reply me as possible.
Try this link and keep visiting that subforum untill reaching it !!
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=299
Have a good luck
I have problem with 1100, it is short circuit between bat conector. Any solution please:confused:
I got 6230i original Problem for sure , never saw a post with such problem
Sometimes it works great then all of a sudden i try to call and the call gets thru BUT i hear NOTHING on the speaker , i switch it to LOUDSPEAKER and still remains DEAD SOUND . after this weird problem it will just restart . When ill call again it will work and sometimes not . I flashed fone already so it not software problem . any idead ?
thanks man i have another picturee do u have this one
man i have make new picture and i am going first post in this foram with picture and tell me remarks http://www.gsmhosting.com/vbb/attachment.php?attachmentid=43304&stc=1&d=1136552133
cliffrock4u005
01-06-2006, 15:18
hi there,
i have a 7250 which display just blank whe n i put it on what should i do
May Check Input V(+) Short With V(-),try Just Remove Fuse And Make Jumper From Input Charger V(+) Conector Point To Fuse Inner Point.
PLEASE CHECK WITH ADGRAF INSTITUTE OF MOBILE JAYADEV VIHAR BBSR
ricardoaraujo
01-07-2006, 22:51
hi ppl i got 6100 sometimes works perfect sometimes going off or block keypad or going off and sw on again, enyone can help me please?????
farrukh mobiles
01-08-2006, 15:54
Hi sevgigsm,
have any solution about nokia 1100 number 3 key demage from bord.
have any jumper from ic to key.
Waiting your reply.
Farrukh mobiles:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
sevgigsm
01-09-2006, 16:58
Hi sevgigsm,
have any solution about nokia 1100 number 3 key demage from bord.
have any jumper from ic to key.
Waiting your reply.
Farrukh mobiles:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
direct UPP----------------------------------------------------
amitks_in
01-11-2006, 09:38
Hi Sevgigsm Help me in this 1100 ! some one Badly damaged the Sim IC of this phone ! and Tracks of SIM IC is missing ! Can it still be repaired ! Insert Sim problem ? Plz check The PIcture !!
sallupat
01-12-2006, 04:47
direct UPP----------------------------------------------------
need urgent mic ways for nokia 1600(mic is not working") & no signal in nokia 6020. plz give me the solution.
Sir no one has give me the solution for the previous posted problems plz help me
thanks
pradeep agrawal
01-12-2006, 06:27
r u mean auto charge sir please help me problem not charging for nokia 1100 and nokia cdma2280 on my mail agrawaltimengd37@rediffmail.com
potzilla
01-12-2006, 19:24
plz help me about my 9500 no lights on all screen. plz give schematic diagram.
glenntelecom
01-13-2006, 16:17
light emitting diode that whaT IT means.no backlights or no illuminations
glenntelecom
01-13-2006, 16:23
I have one same problem ANy Advice abaut this problem.
Thanksyou better try to remove the camera and clean the connector im sure its hardware
shinojmahe
01-13-2006, 17:24
hi dear
well pls b kind enf to guide me to solve n2280 cdma problem which shows no network. pls b kind to post reply with digram if available.
waiting
thanks in advance
:rolleyes:
Niaz Hussain
01-13-2006, 17:24
Hi Everyone
I have nokia 6600. and the problme is 6600 automaticaly Restart & some time power off with in 1 to 3 munites. if someone solution then help me please.
Thanks
Mang mel
01-13-2006, 17:29
oohhh..big thanks more power....
Mang mel
01-13-2006, 17:30
reprogram first if desame rehot CPU..with thinner 20sec..
Mang mel
01-13-2006, 17:34
ur a great man.......more power Godbless u
shinojmahe
01-14-2006, 17:41
hi sir,
well can ve add loudspeaker on a 3310?? i mean on the back of the body??
if yes,what and what compondents we need?? and what and what hardware modification are possible on the entry level models of nokia,like 3310,1100,2300 likewise.
pls b kind enf to post reply
or even snd me a detaild mail in shinojmahe@rediffmail.com
waiting to get your reply
thanking you in advance
hi
need help
first time the phone reboot when insering sim:( ,i flash it with new pm ,now is ok but no network :confused:
any help
thanks in advance
HI Sevgigsm,wanted a solution for a nokia 6260 display problem.Display goes blank on n off.Have replaced the flex cable but the problem persists.have tried another display but the same problem.Surprisingly when i clean the display comnnector with isopropyl alcohol,iget display for sumtime and it goes blank again.dont understand what is the problem.kindly suggest.
artusius
01-15-2006, 19:20
Nokia 5140 power swith way solution,please
Sevigsm can you help me please..
I need camera ways for nokia 6820, my camera don`t work, i have changed the camera modul but the same problem... and another problem is thr flip keyboard don`t work at all.. Have you maybe this ways too?
Best regards
Fonzo
HI Sevgigsm,wanted a solution for a nokia 6260 display problem.Display goes blank on n off.Have replaced the flex cable but the problem persists.have tried another display but the same problem.Surprisingly when i clean the display comnnector with isopropyl alcohol,iget display for sumtime and it goes blank again.dont understand what is the problem.kindly suggest.
Try to change the LCD or rehot the LCD Conector..It will help you...
B.R.,
Fonzo
Will try it out.Thanks for the suggestion.
Regard's
Anand
artusius
01-18-2006, 12:04
Somebody knows Nokia 5140 power switch ways? Or schematic need's.
Thank's
plz any one help me my 3230 is not saving and the battrey gets fat and heatingup. plz reply me anyone
Sir anyone help 3230 does charging but not saving. and after 30 minutes battery became fat plz reply any solution with diagram
tiagofds
01-20-2006, 20:02
hi...im new to the site and im not quite sure how it works. im trying to find a program for nokia 6600 for photos. its a face distortion software. could u please help me??
thank you
tiago
shantilal
01-21-2006, 14:43
BOX OK
JAF DCT4/BB5 LOADERS DIR: E:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: E:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: E:\Program Files\ODEON\JAF\Flash3\
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002100
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 12B0001389A94F575B24A7DA92E7D872D6B50261
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FAC901AEE
CMT Boot File: E:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
Setting double rate stream...
CMT Loader: E:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Loader Ready
Setting double rate stream...
APE Boot: E:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.18.00 -> Revision: 0000
APE Boot Ready
APE Flash ID: 00000000
APE Flash Data: 00000000000000000000000000000000
APE Loader: E:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
Loader version: 01.17.00 -> Revision: 0000
Error loading ape loader...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.V30
CNT Flash file: NONE
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002100
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 12B0001389A94F575B24A7DA92E7D872D6B50261
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FAC901AEE
CMT Boot File: E:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
Setting double rate stream...
CMT Loader: E:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Loader Ready
Setting double rate stream...
APE Boot: E:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.18.00 -> Revision: 0000
APE Boot Ready
APE Flash ID: 00000000
APE Flash Data: 00000000000000000000000000000000
APE Loader: E:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
Loader version: 01.17.00 -> Revision: 0000
Error loading ape loader...
I have this problum with 6681 what should i do
shantilal
GSMARMOON
01-21-2006, 14:46
hipls for flash for n90:confused:
any solution for 7200 no earpiece or speaker, ??? Thanks...
BR,
epic
.:Kuku:.
01-21-2006, 16:29
6600 joy stick dont move to right side..
we changed all joy stick..keypads...but same
any solution ?
WBR
Kuku
shantilal
01-21-2006, 17:33
BOX OK
JAF DCT4/BB5 LOADERS DIR: E:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: E:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: E:\Program Files\ODEON\JAF\Flash3\
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002100
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 12B0001389A94F575B24A7DA92E7D872D6B50261
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FAC901AEE
CMT Boot File: E:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
Setting double rate stream...
CMT Loader: E:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Loader Ready
Setting double rate stream...
APE Boot: E:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.18.00 -> Revision: 0000
APE Boot Ready
APE Flash ID: 00000000
APE Flash Data: 00000000000000000000000000000000
APE Loader: E:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
Loader version: 01.17.00 -> Revision: 0000
Error loading ape loader...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.V30
CNT Flash file: NONE
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002100
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 12B0001389A94F575B24A7DA92E7D872D6B50261
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FAC901AEE
CMT Boot File: E:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
Setting double rate stream...
CMT Loader: E:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Loader Ready
Setting double rate stream...
APE Boot: E:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.18.00 -> Revision: 0000
APE Boot Ready
APE Flash ID: 00000000
APE Flash Data: 00000000000000000000000000000000
APE Loader: E:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
Loader version: 01.17.00 -> Revision: 0000
Error loading ape loader...
I have this problum with 6681 what should i do
shantilal
ape loader problum solve set is water demeg and I gat new error
BOX OK
JAF DCT4/BB5 LOADERS DIR: E:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: E:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: E:\Program Files\ODEON\JAF\Flash3\
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: NONE
CNT Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.00_15.C0R
PPM Flash file: E:\Program Files\Nokia\Phoenix\products\rm-57\RM57_4.050015.vB8
CNT Flash file: NONE
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002100
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 12B0001389A94F575B24A7DA92E7D872D6B50261
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FAC901AEE
CMT Boot File: E:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
Setting double rate stream...
CMT Loader: E:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.0A.08 -> Revision: 0000
CMT Loader Ready
Setting double rate stream...
APE Boot: E:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.18.00 -> Revision: 0000
APE Boot Ready
APE Flash ID: 003500EC
APE Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
APE Loader: E:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
Loader version: 01.17.00 -> Revision: 0000
APE Loader Ready...
Operation took 0 minutes 3 seconds...
Reading Public keys...
Getting Public Keys...
Setting double rate stream...
Erasing...
Error!!!
shantilal
01-21-2006, 17:45
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: FD03A7E78DB8D5A0B3325BCBC175B0BA814948B9
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAP3 ID : 000000010000022600010006000C192101002100
EM 1 ID : 00000232
EM 2 ID : 00000341
RAP3 PBID : 12B0001389A94F575B24A7DA92E7D872D6B50261
RAP3 MODE : 00
RAP3 HASH : E9EFF4BFAA5393217CA6B17755FC3E1402000000
RAP3 ROID : F28A211FAC901AEE
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
00000000: 03 00 00 00 00 B1 72 ......r
ERR: CMT 2nd Boot Resp:
Process Failed, Repowering Mobile
here is with hwk flash please help
shantilal
01-21-2006, 18:47
1600 key ways please
pls send 3100 key pad ways
Hai Master Sevi,I Am Great Problem In 3100 Who,s Resistor And Capicitor Broken. It,s Paid Destroyed Any Way Of On/Off Switching.:confused: :confused: :confused:
sevgigsm
01-25-2006, 10:02
Hai Master Sevi,I Am Great Problem In 3100 Who,s Resistor And Capicitor Broken. It,s Paid Destroyed Any Way Of On/Off Switching.:confused: :confused: :confused:
http://www.iphone-forum.org/showthread.php?t=70063&page=4
jason_ting
01-25-2006, 13:10
i have a nokia N70!cannot use camera!when i'm use camera it always come out "hardware failure:restart camera"!but i tried to change many camera already!also no work!please help me!Mr.sevgi!
Oh Good. You Are Very Big Big Big Master. Thanks A Lot.
Now I Have A 8310. Who,s Shut Off After 1 Minut. Before Shut off Display White Show And Then Mobile Shut Off. I Flash Phone (flash+Locks) But No Ruselt.Any Advise Me Great Master.
binoy sebastian
01-26-2006, 08:23
hai , sevgigsm . 7610 insert sim pls help
binoy sebastian
01-26-2006, 08:32
7610 insert sim pls help me
binoy sebastian
01-26-2006, 09:25
pls 7610 insert sim any bady her
sevgigsm
01-26-2006, 09:27
pls 7610 insert sim any bady her
-------------------------------------------------------------------
baraka42
01-26-2006, 09:55
@ shantilal,
this may help you ?
wbr
sabby_singh
01-29-2006, 09:04
plz. solution for batt low batt empty in N2300, pa changed flshed twice with different version no result
plz specify the reason and solution
shreyvidhi
01-29-2006, 12:11
i have nokia 6600. insert sim problem. how to solve tell me.
New nokia all hardvare solition
Wow - that really seems to be not that hard. Does normally the fuse break if there was a power supply with 5V max 2A and wrong polarisation? Or does the zener diode break? :confused:
Thanx - aacryl
2100 Flashing ok but cannot power on.Flashed with GEO and knok.Changed flash IC ,Problem is Same
gancellshop
01-30-2006, 14:54
@ sevgigsm
Hi, i have also 3200 and keypad driver was damaged. Same problem as masud007 have. could u show as some pics on how to bypass the driver by jumpering?
7610 mobile is working but display blank. pls send solution urgent......
:mad: :mad: :mad:
PLEASE AS IM VERY FUSTRATED NOW THE SCREEN ON THE PHONE IS ALL
DIFFERENT COLOURS AND EVERY NOW AND THEN IT WILL SAY NOKIA
SO I BOUGHT AN LCD AND TRIED IT BUT GOT THE SAME RESULT
PLEASE HELP THANKS
.::GT-GSM MAN::.
01-31-2006, 02:43
I cleaning this pcb some days working and now not working already :( mayby sombody know where I may seek connection with Key ic or Upp ...I studdy SM rh9 but I dont know what up becose I have got secound PCB and inside pins are connection with 4 ,8, 9 with 7 but in this PCB how connection 4 with 7 inside pins it 7 working how 4 :(
Any body help me...
B.R.
zenab1998
02-01-2006, 16:11
Hi all
I have 3100 , it turn off after 30 sec automaticly , any advice pls.
zenab1998
02-01-2006, 16:13
Hi all
I have 3100 , it turn off after 30 sec automaticly , any advice pls.
plz pm me if u have any clue
zenab1998
02-01-2006, 16:17
hi all
I have 3100 which it turn off after 30 sec , but if I conect the charger it will not turn off , plz any advice
hi all
I have 3100 which it turn off after 30 sec , but if I conect the charger it will not turn off , plz any advice
post once please dont flood server
http://forum.gsmhosting.com/vbb/showthread.php?p=1564174#post1564174
3100 can be upp or combo adaptor , reheating could help
6600 joy stick dont move to right side..
we changed all joy stick..keypads...but same
any solution ?
all working only right move dont.
mony_tornado200
02-03-2006, 03:10
thanks alot man. all is a new phone
i did all that but the car isnt moving away any another solution guys
dear that is not car that is earphone symobol just replace conector and shec ur oftions.:confused:
az cells
02-03-2006, 10:15
Hi sevgi master i have problem about 6030 display ways , connector tracks missing so please help
thank u
sevgigsm
02-03-2006, 23:50
Hi sevgi master i have problem about 6030 display ways , connector tracks missing so please help
thank u
http://www.cepciler.com/wbb2/thread.php?threadid=2381
az cells
02-04-2006, 18:54
thank s sevgi master, but i cant understand that language can u upload hiear
please
thank s
afsalslm
02-04-2006, 19:11
my nokia 6600 gallery not opening .............plssssss help me
i have one 6600 , and key 0 and joystic not bilding , i open the fone and clen , joystic are fine but key 0 not working, any sulucion for this problem?
afsalslm
02-04-2006, 19:28
]my nokia 6600 gallery not opening .............plssssss help me
sevgigsm
02-04-2006, 23:56
]my nokia 6600 gallery not opening .............plssssss help me
orj. nokia servis manuel
jason_ting
02-06-2006, 06:23
i have a nokia N70!cannot use camera!when i'm use camera it always come out "hardware failure:restart camera"!but i tried to change many camera already!also no work!please help me!Mr.sevgi!
az cells
02-06-2006, 07:57
thanks master i need n-gage buzer ways please help
thanks
az cells
02-06-2006, 08:07
master password please
hey savgigsm your 6030 lcd ways is protected please give password
help not charge nokia 2650
zahid_mobile
02-10-2006, 11:57
@ shantilal,
this may help you ?
wbr
HI FRIENDS
NICE WORK KEEP GOING THANKS VERY MUCH
ZAHID
sevgigsm
02-10-2006, 21:59
6030 lcd wayssssss------------------------------
hi man i have a problem with my nokia 7260.some keys not working sevgigsm can you help me i need a scheme how to repear it.thx in advance for replies
sevgigsm
02-12-2006, 17:29
2650 sim waysss 2650 sim waysss
please anyone can solve my problem?my nokia 7260 keys not working.i need a sheme for repear it sevgigsm help me please.
sevgigsm
02-12-2006, 22:19
please anyone can solve my problem?my nokia 7260 keys not working.i need a sheme for repear it sevgigsm help me please.
---------------------------------------------------------
SixthSence
02-13-2006, 17:39
@sevgigsm can u post 6682 bluetooth ic picture..........
thanx mannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
thanx mannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
sevgigsm
02-14-2006, 00:42
@sevgigsm can u post 6682 bluetooth ic picture..........
BT IC AND BT FİLTER--------------------------
Great help....very good work ....hard working people at hardware.
SixthSence
02-14-2006, 06:44
BT IC AND BT FİLTER--------------------------
thanx sevgigsm good&great work
regds
whitwline_mc
02-14-2006, 10:05
hi friend chek your imei ...ok. and full flash it
wood3006
02-14-2006, 14:53
thnx alot evryone A mobile phone, also known as a cellular phone, cellphone, mobile, or handphone, is a portable electronic device which behaves as a normaltelephone whilst being able to move over a wide area (compare cordless phone which acts as a telephone only within a limited range). Mobile phones allow connections to be made to the telephone network, normally bydirectly dialing the other party's number on an inbuilt keypad. Mostcurrent mobile phones use a combination of radio wavetransmission and conventional telephone circuit switching, though packet switching is already in use for some parts of the mobile phone network, especially for services such as Internet access and WAP.Some of the world's largest mobile phone manufacturers include Alcatel, Audiovox, Kyocera (formerly the handset division of Qualcomm), LG, Motorola, Nokia, Panasonic (Matsu****a Electric), Philips, Sagem, Samsung, Sanyo, Siemens, SK Teletech, and Sony Ericsson.There are also specialist communication systems related to, but distinct from mobile phones, such as satellite phones and Professional Mobile Radio.
thansssssss brother
nice work
=CostyGSM=
02-16-2006, 16:11
solution for 6680 with not working power button after water damage.
i m veryyyyyyyyyyyyyyyyyyyyyyyyyyyyy thankfull to all the members of this site
johnnytan
02-16-2006, 17:18
hi Mr Sevgigsm could you please tell me is it UEM or UPP that resposible for init LOCAL MODE ? I try flashing my nk 7260 but when it flash to extract content, it will show init LOCAL MODE Fail!
=CostyGSM=
02-16-2006, 17:20
i need schematic for 6680 sim ways!!!:D
@CostyGSM
U can find here http://www.lumeamobila.ro/manuale.php
BR
hi to all
i nokia 6230. phone works properly camera is not working it says (
operation failed)
plase can some help thanks..............
I had the same trouble with camera, but gallery wasn't empty !
I thought it was important because user flash was OK.
Problem was in L262 in VBATT0_3 (VBATT3) circuit
(placed in R2 segment of bottom side, near to UEM).
Hope it will help to someone.
Regards
Pm
Hello every body :-)
Plz I seartching solution for no network and no charge in Nokia 2600 ?
thanks inadvance.....
dear sir my device is ok but when i leave it for a while and after the screen saver apper on it's screen the lcd becoms shakig light i mean you can see that the light of it is shaking but when you press any key the light is on and ok please does anyone know how to solve this problem?????
johnnytan
02-17-2006, 18:43
@CostyGSM
U can find here http://www.lumeamobila.ro/manuale.php
BR
i go to the web but confusing!!!
do i need to pay? is it free?
how to register?:)
Hello,
6610i no network - JAF Phone test show´s - st_rf_chip_id_test: fail (1):confused:
antena swich and change pa ?
i need schematics 4 this phone model
thx
hi i m ejaz ahmed i want all testing points of all nokia leading brands i will veryyyyyyyyyyyyyyyyyyy thank ful to u
budzsector
02-19-2006, 17:24
i had 2300 always says invalid sim
budzsector
02-19-2006, 17:25
pls help me with my 2300 always says invalid sim
pradeep agrawal
02-19-2006, 17:50
hi friend ii have nokia 3100 it problem no network so please help me
johnopiyoyo
02-19-2006, 18:49
good work guys keep it up
az cells
02-19-2006, 19:04
hi maite check this track
i go to the web but confusing!!!
do i need to pay? is it free?
how to register?:)
it's totaly free for manuals
and another link ..very usefull....http://www.mobilchips.com/manuals.php?p_cat=2
maliknawa
02-20-2006, 16:21
THANXX IN ADVANCE TO ALLLLLL:rolleyes:
arvin_ado08
02-20-2006, 21:48
i have 3510i with water damage after i cleaned the unit the backlight wont work. any ways how to do it? any pic maybe a great help!!!
ryaz1993.
02-20-2006, 22:54
Did U Try This Way ?????
nnaeem11
02-21-2006, 22:52
8800 Strip Repairing Pic Plz There Is No Light On Lcd But The Phone Is Working Fine.
Naeem Farooqui.
my 3315 hadset restarts frequently..... plz help me
Since I don't have priviliges to post a new post, excuse me for using this thread for asking my irrelevant question.
How could I create a Wake Up Graphic for Nokia and upload it to a handset ?
How to use the Label Printing Module which is the part of Nokia Data Package ?
Regards.
GSM GUY
parvezjk
02-22-2006, 09:27
Where can I find schematic diagram of 1600 and 1110????????
hi i have a nokia 1600 slightly water damaged i have cleaned the phone but now when i instered battery it shows "LOCAL MODE" on the screen any sloution to this please.
thanks
hi i have a nokia 1600 slightly water damaged i have cleaned the phone but now when i instered battery it shows "LOCAL MODE" on the screen any sloution to this please.
thanks
cheque evry thing from the batery size (midle pin of battery contector) pin to the uem
vineet thapar
02-22-2006, 16:22
New nokia all hardvare solition
i have a nokia 6610. i tried to flash it. flashing o.k but local mode failed pls help. thanks in advance
Anybody have the solution of 3310 Network 000 00 ?
I have changed Cobba,Hagar,PA.Ant Sw etc. But the prob. is same.
Plz help