PDA

View Full Version : what hardware/software to read PUK?


koloksky
07-06-2000, 01:03
what hardware/software to read PUK?

Squesch
07-06-2000, 02:05
It is saved on the card and cannot be read out. Same with PINs and PUK2.

Sorry.

Squesch

GSM-Lupo
07-06-2000, 17:41
Hello all !

With program SIMSPY 2.0 on www.chinamobileworld.com (http://www.chinamobileworld.com) (low rate) it's no problem. But you have to use a S25 (sorry). The u can read and edit PIN/PUK

b.R.
GSM-Lupo

koloksky
07-07-2000, 00:43
hi all,

thanks for reply http://www.thoic.net/gsm/ubb/smile.gif, i made simscan and read sim but it is very slow, you can replace 3.5 MHz crystal with <10 MHz to make reading faster... but PUK are encrypted http://www.thoic.net/gsm/ubb/frown.gif

steve
07-09-2000, 19:17
PUK and PIN are written in card memory which can't be acessed directly...
there is procesor on the card (does anyone know what processor ??) ..
so when you enter PUK it crypt it with some algorythm and compares it with one in memory...

it is something like PIC16f84 Golg card
Pic16f84+24c16 eeprom .. but eeprom can be acessed ONLY thru pic software..

X-Shadow
07-12-2000, 12:25
Hello Guys,

Just 1 question for you SIM Card experts.

Can I make an exact copy of a SIM card?

I have with me an original Motorola Test
Card. This is a stand-alone sim card that
doesn't need ASIM software or PIC. It is
original from Motorola.

Can I copy it? How then and what Hardware
should I use?

Best Regards,
X-Shadow

MP
07-13-2000, 11:57
Hi GSM-Lupo,

is possible with program SIMSPY 2.0 read PIN from SIM which is PIN protect active ?
If yes, send me please this soft. URL chinamobile is not working by me.
You have schema hardware for read SIM card with SIMSPY ?

Thanks

MP

koloksky
07-14-2000, 04:04
hi gsm-lupo

how do you use s25 for simspy?

anybody got links on gsm card terminology (imsi,kc..etc)

to x-shadow, i think asim works best as alternate, besides it is easier to make http://www.thoic.net/gsm/ubb/smile.gif

cheers

X-Shadow
07-15-2000, 05:45
OK Koloksy,

I now have info on how to make clone cards.
I dont need to copy the original card,
someone already provided me with HEX +
program to program SIM a blank card.

My question now is, can you please share
schematics of your SIM card reader/writer.
I have 4 different schematics, but I dont
know which one works.

Also, can SIM SPY really read the PIN code
of SIM cards if the SIM is not yet blocked?

Best Regards,
X-Shadow

koloksky
07-17-2000, 02:34
sorry, i don't have a scheme writer for sim.. and recently i just know that there r diff. version of sim, not all r same.. don't know if could read all types of sim and its pin code http://www.thoic.net/gsm/ubb/frown.gif

rompa
07-20-2000, 03:40
Need cardreader to use simspy??