DeDo Gsm1911
03-17-2005, 13:36
today i unlock 2 phone by this steps :
1. Download and install Card Export. NOTE: The Card Export shareware install file is attached to this post.
2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to.
3. Dowload the flash, patched.zip, here. http://www.techwarelabs.com/downloa...ion=file&id=142 (http://www.techwarelabs.com/downloads/?action=file&id=142)
Part Two:
1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.
2. Hard reset the Treo.
3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.
4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).
5. Sit back and relax, it's going to take a good 10 minutes.
6. The phone will automatically hard reset at the end of the process.
That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version. I recommend you do the regular upgrade first though.
the problem is :
the 2 phone is the same verstion but 1 phone work well and seconde phone camera not work
and i'm sure that i made same steps in 2 phone
and when i upgrade phone the phone work always in offline mode
and when i upgrade the phone by this update Treo 600 GSM v3.05 Cingular the phone work well but unlock in Cingular operetor :(
please help me for solve this problem :) BY GIVE ME PATCH OF V3.5 I KNOW THIS ONLY WILL SOLVE MY PROBLEM
B.R
DeDo Gsm
1. Download and install Card Export. NOTE: The Card Export shareware install file is attached to this post.
2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to.
3. Dowload the flash, patched.zip, here. http://www.techwarelabs.com/downloa...ion=file&id=142 (http://www.techwarelabs.com/downloads/?action=file&id=142)
Part Two:
1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.
2. Hard reset the Treo.
3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.
4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).
5. Sit back and relax, it's going to take a good 10 minutes.
6. The phone will automatically hard reset at the end of the process.
That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version. I recommend you do the regular upgrade first though.
the problem is :
the 2 phone is the same verstion but 1 phone work well and seconde phone camera not work
and i'm sure that i made same steps in 2 phone
and when i upgrade phone the phone work always in offline mode
and when i upgrade the phone by this update Treo 600 GSM v3.05 Cingular the phone work well but unlock in Cingular operetor :(
please help me for solve this problem :) BY GIVE ME PATCH OF V3.5 I KNOW THIS ONLY WILL SOLVE MY PROBLEM
B.R
DeDo Gsm