View Full Version : Philips 535 death!!!
After reading codes with RedBox and unlocking Philips 535 all work nice but after 2h phone wont turn on. only PHILIPS sign on screen and turn off again
any solution?
br
yes
this is a great bug in redbox :)
sometimes(most of times) kills philips phones
thats why I use other tools for philips
You will able to fix this phone even with redbox but you will loose time till you'll get fixed
One year ago I killed one 535 with redbox and I fixed with redbox but I make a promise to never use redbox on philips phones
BR
Rak|m
Aamir_Zia
04-02-2005, 02:21
Their is a very Easy Solution for this Prob
Put Phone in TAT Mode
It will read the codes
then do FACTORY Reset
All will be OK
Enter NCK Codes Manually
This works 1000000000000000000000000%
gsmVolume
04-08-2005, 17:53
Time is very expensive, then why not use any better tool which can unlock phone without perforce insert code via keyboard ?
In rvolume you connect phone, press to unlock, and this is all. Phone unlocked, and work very well !
gmc
i know exactly what u r talking about! i had exact problem,how did i fixed it?flashed the phone with repair flash,factory reset,then i read the nck with rvolum clip!some how the codes given by red box were messed up,then i put the nck code by using the rvolum clip,phone got unlocked and worked fine, i hope that helps u.
br
farry
CPUKILLER
04-10-2005, 08:29
After reading codes with RedBox and unlocking Philips 535 all work nice but after 2h phone wont turn on. only PHILIPS sign on screen and turn off again
any solution?
brsame thing happened with me just write back sp backup file then flash with reoair flash in support area then do factory reset in soft then read codes and enjoy 100% tested in redbox
gsmcaptain
04-10-2005, 19:54
After using Redbox to flash repair_flash, phone will not enter enter TAT mode again:
I always get this:
TAT mode OK.
Reading IMEI............
Comunication error!.....
Now phone comes On with screen white and can not flash again.
What is wrong?
regards.
gsmVolume
04-10-2005, 22:15
is't so hard find out what is wrong
spectrum
04-11-2005, 15:49
With RedBox:
1.Flash your phone with Repair flash
2.After flash, remove battery and put it back
3. Click TAT MODE
4. Click Set to default button
5. Remove battery and put it back, Push ON button for 4 to 5 seconds
Your phone should be ok, but still locked.
Phone codes given by Redbox is in hex, you can either convert it to decimal or use any other prog that can read phone codes in decimal, directly.
I use Sanchez
dannyogolo
04-11-2005, 18:17
@Spectrum,
Unfortunately, this procedure does not work for all phones, (especially 535's locked to o2.
After flashing with repair flash, phone dies and does not even show white light anymore.
it works but unfortunately u have to read the code with rvolum clip,this is an old story,i broght it back to life with the said method!!
br
spectrum
04-11-2005, 20:47
It should work
Make sure your battery is fully charged!
Ensure you have proper cable contact
Use cable with external power option (I used Teleway cable with Unibox with the power on)
Conect the phone by using the Connect Button in the Flash Option page.... not the TAT mode.
Power ON Phone...OK!
TAT MODE..OK!
Reading Imei..OK!
IMEI : 352751-00-090753 7
Reading Codes..
Communication Error !!
that means that this section is not updated looong time...i have used flash for reflash phone from delok section 4.2 version...