MC 60 big problem

[doktortelecom]

Hello,
I will now present what happened to one mc 60 which came to me to change language:
1. the phone in original was vers 4, i back-uped the firmware by reading it with freia 9 .
2.i wrote firmware with freia 9 with romanian language, then unlock-direct unlock no map saved -use original IMEI, anfreia gave me the message "upgrade is not possible", then i wrote back the original firmware:the phone was still workimg.
3. i tryed to write firmware with SST 5.37, but sst was asking to ".bin" files so i changed extension by renaming, from ".fls"(that i had from freia) into ".bin", the SST wrote it 100% and then the phone was killed.I tryed the repair function of SST but but the phone was not connecting to PC(when i pressed the pwr on button of the phone nothing was happening);i tryed unlocking function with freia 9, 10, 15 :"phone is not powered on", i realised that i broke the boot partition in flash some friends told me that only Martech can repair the phone, but i don't have Martech.
4.I changed flash IC but i didn't have one of MC 60 so i used one from a C60(it seemed to be all the same).Then, i wrote the original firmare in the phone with freia 15-it connected ok- then unlock(direct unlock no map saved-use original imei) but the phone still dead-it does not power on.
So after this story does anyone what to to?
thanks in advance.
regards,
doktortelecom :mad:

[Albinas]

If phone was v4 you dont need TP for this version. Now used freia10,
Write boot
write full flash
write eeprom
unlock used orig imei
all ok

[tigertrn]

Yes, write bootcore, full flash and eeprom, then unlock, but I think you may useflash IC from MC60, not from other phone. If freia says phone is not powered on, juts cut the test point and all will be OK.

[Chris02]

Write normal FUBU (select MC60) if it is finished write MC60 Boot FUBU (special FUBU which is only 2MB).

Now unlock the phone. (unlock-->direct unlock-->use. org IMEI-->press power on shortly.

[doktortelecom]

Ok guys i understood you all, BUT, I HAVE THREE BIG PROBLEMS:
1.I only back-uped fullflash as firmvare, so i don't have its original Eeprom.
2.where i cand find the bootcore for MC 60
3.where can i find fubu(for MC60)?
And the fourth-but that's an explanation: i cut testpoint when i canged the flash IC (with the one from a C60), because otherways freia said "boot fie not accepted".
In theese conditions what do i have to do more?
thanks.
doktortelecom

[fingusio]

@doktortelecom
For what you flash phone by Freia if you want change language?????????? If you want change LP just flash with SWUP not else!!!!!!!!!!!

now do as friends said.

br.
fingusio

[doktortelecom]

@doktortelecom
For what you flash phone by Freia if you want change language?????????? If you want change LP just flash with SWUP not else!!!!!!!!!!!

now do as friends said.

br.
fingusio
i didn't have winswup for mc 60, now i have it but i-m afraid that is late for that phone, but can you tell me where i can find fubu for mc 60?

regards,
doktortelecom

[doktortelecom]

Ok guys i understood you all, BUT, I HAVE THREE BIG PROBLEMS:
1.I only back-uped fullflash as firmvare, so i don't have its original Eeprom.
2.where i cand find the bootcore for MC 60
3.where can i find fubu(for MC60)?
And the fourth-but that's an explanation: i cut testpoint when i canged the flash IC (with the one from a C60), because otherways freia said "boot fie not accepted".
In theese conditions what do i have to do more?
thanks.
doktortelecom
I still have the three problems quoted as 1, 2, and 3.
regards,
doktortelecom

[Viper Jr.]

there is a solution somewhere on tis forum, it calls mc60 repair
U can try flash your phone with that, it helped me so meny times...

[Gorgin]

@doktortelecom

Make TP And Write Back Your Romanian File With Freia And Unlock If Nothing Changed Then Try To Write MC60Boot FUBU (That I Already Have And You Can Make It Yourself From Another Working MC60)

However You Have To Make TP .

[Chris02]

I still have the three problems quoted as 1, 2, and 3.
regards,
doktortelecom


Check Landys server!

[doktortelecom]

Thank you all guys!!!
My phone is working perfectly now and with romanian language too.
regards,
doktortelecom

[noamlab]

i need help to unlock mc 60 with ufs3