View Full Version : bh4 dead after s2gsm orginal
i have bh4 v102 dead after unlock i have backup but always error error writing flash i cant write anything to phone. Phone is conecting to software ... what i can do
Try to clean the contacts.
done already but i think its cable problem i tried with two difrent but still the same, but how phone become dead if software not sending anything, i mean is sending bootloader but nothing elese
Charge you battery and connect to Henrich 5.23!
batterry is charged even when i use power supply, but even before i tried to conect with heenrich and wont connect with s2gsm conected but killed my phone i am getting crazzy i can find the reason
What OS you use?
Henrich won't to connect ... strange?
/... i had this problem on 102_283 ...once!/
I always use cable with external 9 volts battery - no problems !!!
... and NEVER s2gsm !!! When some soft won't to connect ... what other words can say about it?!
Are you sure that each battery is charged? /phone & external/
What OS you use?
Henrich won't to connect ... strange?
/... i had this problem on 102_283 ...once!/
I always use cable with external 9 volts battery - no problems !!!
... and NEVER s2gsm !!! When some soft won't to connect ... what other words can say about it?!
Are you sure that each battery is charged? /phone & external/
Why don't you read first.......the only soft that can connect to phone is s2gsm!!!!!!
You read it !!!
Or you have too many other posts to look at this little thing !!!
The man tells that 1st - henrich won't connect and 2-nd s2gsm !!!
PS - "to clean contacts" :) :) :) ... he sad that already use the cable ... if this is try then the ****ing problem is not from the contacts and the cable !!!
- I don't see anywhre in www.service-gsm.net to offer Henrich, but s2gsm YES :) .... strange isn't it???
And he not demaged the phone with Henrich, but with s2gsm ORIGINAL ... I've s2gsm on 5 different PCs/with equal OS/ and only one connect to phone /from 7 tries/ ... if this is not STUPID ... Henrich 5.23 connect at first time you try !!!
Bye !!!
still no luck s2gsm conecting no other soft cant conect, grrrrrr i say one word wasted :)
gsmmasters
04-15-2005, 09:06
Problem is mainly caused by cables or computers serial interfaces.
Alcatel phones detect baud rates by exact data timing from program.
To solve that kind of problem we made specific USB hardware OTUF USB box.
In your case with s2gsm you must try it on several Serial and USB2Serial interfaces and on different computers. As far as I know s2gsm soft works with bh4 v102 well without killing phones.
alredy tried on serial2usb on fdi controler, but soft is detecting fone well but does not writing anything to fone strange,
shaggydogza
04-17-2005, 10:50
@2xxu
Contact s2gsm, he has helped me on various occasions and has managed to sort out all of my problems. He has an excellent after sales service
You know the solution ... Alcatel Service !