Can U convert 6010 3530i? [Archive]

Bloodware

04-11-2005, 15:24

I have a 6010 (NPM-10) phone (850/1900).Erased full flash then flash it w/ 3510i but it's died. Reflash w/ 6010 and it wakes up again! :confused:
What can I do now? Flash it with another version? Which version can be use?
Thanks ur ADV!

yasirmcp

04-11-2005, 15:32

I have a 6010 (NHM-10) phone (850/1900).Erased full flash then flash it w/ 3590i but it's died. Reflash w/ 6010 and it wakes up again! :confused:
What can I do now? Flash it with another version? Which version can be use?
Thanks ur ADV!

THEN ALL EASY ALL CAN UPGRADE LIKE THIS 3310 TO 3510I
IT IS NOT POSSIBLE TO CONVERT 850/1800 MHZ TO 900 MHZ(3510I)
DONT WAST U R VALUABLE TIME

Bloodware

04-11-2005, 15:48

THEN ALL EASY ALL CAN UPGRADE LIKE THIS 3310 TO 3510I
IT IS NOT POSSIBLE TO CONVERT 850/1800 MHZ TO 900 MHZ(3510I)
DONT WAST U R VALUABLE TIME
Sorry about my mistake!

wasifkhan

09-28-2005, 15:57

hi everyone actually i want convert 6010 to 3510i .

pl. help me

thanks in advance.
regards.

vrepair

09-28-2005, 17:41

nokia 8801 conversion

--------------------------------------------------------------------------------

hello

i have nokia 8801 and i want to convert it to gsm how can i do that...i mean i want to change it to nokia 8800..can anybody help me out plz

thnx

RafalTK

10-07-2005, 19:57

Can somebody share the solution for converting 6010 to europe network?

crystal11

10-08-2005, 19:32

6010 posiible to convert..there are two version mexico and u.s..
if its npm10x mexico..npm10 u.s...

visit this site for more detailed info...www.tapgsm.com.ph...search for 6010 convertion.its here and 100% working in 900/1800 Mhz band.

Ashwani Gaur

10-08-2005, 23:47

How can I convert NPM10x ,Pls give full link or any other clue.
BR
Ashwani Gaur

vrepair

10-09-2005, 09:12

hello

i have nokia 8801 and i want to convert it to gsm how can i do that...i mean i want to change it to nokia 8800..can anybody help me out plz

thnx

crystal11

10-09-2005, 14:32

u hav to change flash i.c,of course 3510i or 3530 flash i.c,then change the 3 filters the 850/1900 mhz rx and 1900 mhz tx filter, then flash it to 3510i,,u must also add a ram to it,coz npm10x doesnt hav ram installed,and lastly put a jumper from uem to pa..i dont know how to upload pics,can u tell me how?for better.

gsmsharing

10-09-2005, 14:49

crystal11

10-10-2005, 17:51

chek ur email! gudluck

ReyTech

11-16-2005, 14:25

chek ur email! gudluck
@crystal11
can u pls send me too the pics of conversion of hardware on markslywester630@hotmail.com
wbr
ReyTech.
:confused:

Raklm

11-19-2005, 17:45

add a ram????

:)

BR
Rak|m

dawgweed

12-02-2005, 09:25

Helo... i have the same problem too. pls send a solution for dis converting 6010
dawgweed17_2004@yahoo.com
advance thx ... regard no.1

matyjasz

12-02-2005, 10:24

add a ram????
:)
BR
Rak|m

Yes... DDR ...

rotfl

respect

faysal

12-16-2005, 15:22

mfaysal75@yahoo.com
can u please send me info regarding thos phone..
i need to use this phone in uk..
cheeers mate..

ReviveR

01-16-2006, 03:33

Yes, SRAM can be added to NMP-10X phones... Or just use combo flash, as already there.

Here are some pics, thx to and best regards to to All-Pinoy forum ;)

BR

waleed2

01-24-2006, 11:18

thanks for great solution

inat

02-09-2006, 07:30

nice work, good solution! signal fullbar:D

morsy_solution

04-01-2006, 19:26

can u pls send me too the pics of conversion of hardware on
morsy_solution@hotmail.com
if u plz

morsy_solution

04-01-2006, 19:34

thanke u

........

akshay

04-03-2006, 10:31

if change flash so . wht abt imei??????????? ?? ?????????

gambit111698

04-05-2006, 21:43

6010 convert 3510i possible, weve tested it!!!

ReviveR

04-06-2006, 00:34

if change flash so . wht abt imei??????????? ?? ?????????

First read pm and convert to rpl...
Afterwards write that rpl to phone...

Byte

05-13-2006, 09:11

can i use flash ic from nokia 3510i phone?

ace_venturia

06-06-2006, 17:40

i too need the pics of that can anyone send it to ace_venturia@hotmail.com
thanx

SALLAM

09-04-2006, 03:00

oooooooooooo

help me i change ic flash and boot flash v5.35
but

1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x01FFFFFF,00000000,
Algorithm: u_intel.fia, Ver: 4.15.0
Algorithm Ok, MSID: 8452DE6E10F856155635029877
Decoded MSID: D3EBBAE9-0047B073-A9000000
Encoded FAID: F0E15645-8CDCD077-C08A9FD5
Erasing: 0x01000000-0x0100FFFF ...
Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

thanks to help

ReviveR

09-04-2006, 03:41

Flash IC is not recognised, reball and place again.

kurinay

09-04-2006, 03:53

every one i have converted 6010 many times this is the solution:D :D :D

kurinay

09-04-2006, 03:54

say thanks to me hehehe

Slider_Gsm

09-21-2006, 18:40

hi

any body faces any probleme in converting or wanna know full information about how to convert just contact me :)

br;)

razvan

09-29-2006, 18:15

@ReviveR
you said
"First read pm and convert to rpl...
Afterwards write that rpl to phone..."
how do i do this? what adress to read? how do i convert pm to rpl?
thank you!
br

Gozha

10-07-2006, 18:55

can somebody explain pls...

waht is 001.. or 4s?!

because i do not have 3530 memory ic...

what enother memory ic is compatibl;e?! which models?!

ReviveR

10-07-2006, 20:04

@ReviveR
you said
"First read pm and convert to rpl...
Afterwards write that rpl to phone..."
how do i do this? what adress to read? how do i convert pm to rpl?
thank you!
br

Sorry I haven't seen this earlier...
What tool do you use? You can read full pm with UFS or any other Nokia tool.
you have some tools for conversion to rpl here on forum...
If no other way, attach here I will calculate for You.

Gozha

10-08-2006, 11:51

i`ve put in 6010 the memory ic from 3510i.. but flashing gives me an error when extracting content package... can somebody advice me something esle?!

what anther model memory ic is good?!

Gozha

10-08-2006, 13:30

just i am stupid a little :) i`ve solved :)

Gozha

10-08-2006, 18:07

calculate pls rpl ... this is ask + absolute pm

moldovan

10-08-2006, 18:39

calculate pls rpl ...

For $15 welcome.
But I not sure if You have reason pay for N3590 garbage.
WBR !

Gozha

10-08-2006, 18:51

First read pm and convert to rpl...
Afterwards write that rpl to phone...

can you explain pls how to convert my pm to rpl... pls...

thanks in advance

ReviveR

10-08-2006, 19:54

1.Read FULL PM (fields 0-255) from a working phone (6010) - NOT ABSOLUTE PM, NOT .ASK
2.Use 'carvos suite' or any similar tool for pm->rpl conversion
3.NOW change flash IC physically
4.Write converted pm->rpl file to phone with new flash IC

ReviveR

10-08-2006, 20:03

This sould help with the above...

akfrm

10-09-2006, 22:42

This sould help with the above...

Sir.

I Got error msg while loading pm file read by ufs 0-255 . Is it working sir

Thanx

yoda67

10-12-2006, 10:35

please i need full flash for 6010 thankyou

gambit111698

10-12-2006, 23:25

This sould help with the above...

could this help if the imei is already ??????????????, thx in advance

ReviveR

10-13-2006, 01:28

Nope .

yoda67

10-13-2006, 13:05

can you convert 6010 usa network to work on aus network thankyou

akfrm

10-20-2006, 20:40

ReviveR

10-21-2006, 02:19

will do it during the day.

alltech18

10-27-2006, 08:10

does anyone have the solution to convert the 6010 to 3510i yet?
thanks

ReviveR

10-27-2006, 13:06

This whole thread is the solution...

huycuongmobile

10-27-2006, 19:13

6010 flash 3510i...die . reflash 3595 NPM-10 ...no power on! please help me for power on .Thank ....full erased..

huycuongmobile

10-27-2006, 19:18

flash file 6010=3595 ?? my phone is ...Mexico

cool_male01

07-26-2007, 09:45

hello can u send me also the pict of jumpering uem to pa?heres my emaill add cool_male01@yahoo.com,,,thnks in advance

cool_male01

07-26-2007, 09:46

hello can u send me also the pict of 6010 jumpering uem to pa?heres my emaill add cool_male01@yahoo.com,,,thnks in advance

/ARIF/

07-26-2007, 14:05

...www.tapgsm.com.ph... (http://www.tapgsm.com.ph...search)this link is not perfect