View Full Version : x70 a32 unlock prob. please help
i had x70 a32.. when i try to unlock it.. the program says that i need to flash it.. i have downloaded the flash files from the support and try to unlock ..
the prg did step 1 and step 2.. and in between says that i have to flash it after the unlock.
now step 1 and step 2 are completed.. but i cant flash the x70 with the winmodo.. i have tryed all the flashes... a32... a34 ... a35... and even a39 as suggested by the support person.. but still get the same error..:
signaling
singnalling recived
parameters exchange
ERROR [F1] > ???
downlaod aborted :( :(
can any one help me out. :(
if we have to flash the phone in between the step 1 and step2.. than we must have 2 com ports and cable..since if u use com1 for unlocking ..cant use it same time for flashing... and for flashing need another com/usb port.
Aamir_Zia
04-23-2005, 15:18
Seems Like Terrible Thing Happens :(
Do you Put Out Your Battery After UNLOCK ??? :(
Seems to me that Phone was in Boot Mode & You Put Out his Battery
Now the Boot is Lost & There is no Avaialble Solution ....
no the boot is not lost...
i can still flash it.. but the F1 error means that incompatable flash..
either some thing wrong with the updates or procedure,
if the boot is lost flasher cannt communicate with the phone ..
br
what is on external lcd while you trying to start download?
FLASH LOADER
x70 secure v2.0
ABD error
Aamir_Zia
04-23-2005, 15:33
If is Showing Like above
May be Boot Laoder is Still Alive
Contact Infinity TEAM as soon as Possible
InfinitySupport
04-23-2005, 18:54
FLASH LOADER
x70 secure v2.0
ABD error
BootLoader alive.
Read more here, pls:
http://forum.gsmhosting.com/vbb/showthread.php?t=202320
B.R.
InfinitySupport
Hi Tried unlock X70 version A32 with X70_V104.exe and I get this message
Checking data, wait...
Device have to be SWITCHED OFF
Press Power button now...
TestMode Ok
Set Baud...
Set Baud Done
Parameters...
SW Version: GAX70A3232040408
FLASH-ID: 89000D88
Parameters Done
Check data...
STEP-01 in progress...
Check data Done
Check HW...
FLASH supported[89000D88]
ATTENTION !
Version [GAX70A3232040408] for flash [89000D88]
not supported yet
Remove battery now !
Finished
Any ideas if this version still not supported?.
thanks
br
msa
InfinitySupport
04-24-2005, 10:40
Hi Tried unlock X70 version A32 with X70_V104.exe and I get this message
Checking data, wait...
Device have to be SWITCHED OFF
Press Power button now...
TestMode Ok
Set Baud...
Set Baud Done
Parameters...
SW Version: GAX70A3232040408
FLASH-ID: 89000D88
Parameters Done
Check data...
STEP-01 in progress...
Check data Done
Check HW...
FLASH supported[89000D88]
ATTENTION !
Version [GAX70A3232040408] for flash [89000D88]
not supported yet
Remove battery now !
Finished
Any ideas if this version still not supported?.
thanks
br
msa
Read more here, pls:
http://forum.gsmhosting.com/vbb/showthread.php?t=202320
And for your phone: flash it to other SW-Ver (A34, A35, A36) and then make unlock.
B.R.
InfinitySupport
What a Support :)
Thank you very much. Phone upgraded to A34 and unlocked fine. :D
Thanks
br
msa
Read more here, pls:
http://forum.gsmhosting.com/vbb/showthread.php?t=202320
And for your phone: flash it to other SW-Ver (A34, A35, A36) and then make unlock.
B.R.
InfinitySupport
i am unlocking one x70 it was 32ver first i unlock it software sys unlocked but stiil says please inser corect sim card. i flash it with 34ver but still same problem please solve my problem ASAP
B.R.
Checking data, wait...
Device have to be SWITCHED OFF
Press Power button now...
TestMode Ok
Set Baud...
Set Baud Done
Parameters...
SW Version: GAX70A3434040622
FLASH-ID: 10107E7E
Parameters Done
Check data...
STEP-01 in progress...
Check data Done
Check HW...
FLASH supported[10107E7E]
Check HW Done
Operation...
Working, don't interrupt...
Action-1 Ok
Action-2 Ok
Action-3/1...
SW Version: GAX70A3434040622
FLASH-ID: 10107E7E
Action-3 Ok
STEP-1 complete !
Operation Done
First part completed
Remove/Install battery and press "Unlock" button again.
Finished
Checking data, wait...
Device have to be SWITCHED OFF
Press Power button now...
TestMode Ok
Set Baud...
Set Baud Done
Parameters...
SW Version: GAX70A3434040622
FLASH-ID: 10107E7E
Parameters Done
Check data...
STEP-02 in progress...
Check data Done
Check HW...
FLASH supported[10107E7E]
Check HW Done
Operation...
Working, don't interrupt...
Action-1 Ok
Action-2 Ok
Action-3 Ok
FLASH-ID: 10107E7E
Action-4 Ok
Action-5 Ok
Action-6 Ok
STEP-2 complete !
Operation Done
Process completed
Phone Unlocked Ok !
Remove/Install battery now !
the log created by software is shown to u but hanset is still locked??????
B.R.
CherieCom
06-06-2005, 08:42
what flash version can revive x70 *orange* killed by ufo tool???
InfinitySupport
06-06-2005, 08:57
what flash version can revive x70 *orange* killed by ufo tool???
Hello !
Really, I never tried to repair this kind of damaged X70 and Im not sure that it can be repaired.
I think that it's no need to make flashing, it's useles.
Just try to make unlock with Infinity-Box and see results.
B.R.
InfinitySupport