View Full Version : T28s 00W47 user code...! Help!
ponticellinks
04-09-2001, 14:38
I've a T28s 00W47 with 000809 SW edition and i have to unlock from user code, but any Zulea 5.2 5.3 unlock it.
Can someone help me?
Thanks in advance! :p
Usa Datex workshop modified by SuperDupond
Saluti
ponticellinks
04-10-2001, 00:22
It doesn't work with this version... :(
Try Bartek software for 1018 and Txx Ericsson..
ponticellinks
04-10-2001, 12:15
Originally posted by Olexa:
<STRONG>Try Bartek software for 1018 and Txx Ericsson..</STRONG>
Unfortunately Bartek_16 - which i use for user code - doesn't work on this version, because detect the phone as T10-T18new and the code is 0000 (default), which isn't true.
:(
Thanks the same!
Try andromeda 3.0 maybe this can help you, dont tested from me.
Good luck
Vala
Pandemonio100
04-11-2001, 10:38
NAPOLI:::::::usa Andromeda......ciao caro ;)
ponticellinks
04-11-2001, 13:06
Originally posted by Pandemonio100:
<STRONG>NAPOLI:::::::usa Andromeda......ciao caro ;)</STRONG>
Unfortunately nothing work with this T28s... :(
I used Andromeda, i used Datex modified by Superdupond, Zulea 4.2,4.1, 5.X but nothing work....in the sense that the phone is ALWAYS recognized as T10-18new, and so the program says "unlocked", but it isn't!!!
I downgrade the sw to 0006XX, to 000113, to 9910XX, but with no one of this version the programs recognized phone as T28s, but ALWAYS as T10-18new.
So i'm sure that this is an harware problem, in flash or eeprom, because this problem is with recent hardare 00W47...
Bye
:mad:
supastar
04-15-2001, 00:36
i foun solution for read user code in r310
who knows, maybe solve yours problem
How to read user code from all R310s
================================================== ==============
To read it you will need:
* Ericsson ATx Maker by Bartek v1.6
* T28s user lock reader v0.5 by Forklift
----------------------------------------------------------------
1.Open Ericsson Maker by Bartek
2.Click on read phone
6.Press NO for short time
3.The prog have now detect the phone as Ericsson T10/T18 new
(Or on old versions as T28s),IMEI is correct but Ph.Code
is wrong
4.Click on Read all EEprom,give save path and click yes
5.Press NO for short time and wait until it finish the
downloading
6.Close the prog and open T28s user lock reader,click on YES
and choose the eeprom dump!
Hi!to all
To remove the phone code for T28 00w47 u need 2softs
first read Eeprom dump with Ericsson ATR service V5.2 or V5.3
And after use T28seelock_V2.0 to show the Lock code(mail me if u don't have it)
Regards!
Hello,
I have problem with T28 user lock,
can you bring me T28seelock_V2.0.
Kind Regards
Andrews
Read eeprom form phone, then use New Ericsson BIN-service v0.4c, Ericsson Dumper v0.5 BETA by Dirk, or any other one.
BR
Guys, please drop a T28seelock_V2.0 to GruBBy@mail.kz i think it's not so big?