E338 Repair Tool v1.0 By YASSINOV [Archive]

yassinov®

05-17-2005, 14:26

E338 Repair Tool Repair & Fix Problems after Bad Unlock

3Hours nOt oNe wEEck it Will Come ! ;)
Direct Download from here !

http://www.kokoom.com/yassinov/images/338-repair-tool.jpg

serova

05-17-2005, 14:35

plz need pass to access to free downloads
big thx
serov:)
serov.anatoli@laposte.net

TEHGSM

05-17-2005, 14:43

need user name and pass :( :( :(

mobilephonesgro

05-17-2005, 14:46

Dear Sirs,

Just register to get user name and password.

Thanks

Aamir_Zia

05-17-2005, 14:47

It will be Cool if it will Work :D :D :D

goanga

05-17-2005, 14:59

i have registered .. but when trying to download it ask's for password ... ehere to get the passowrd from ?? :(

gsm-decode

05-17-2005, 15:09

what about nec 616 restart problem
i flashed and repair with spear and the same
rgds

fantasmino

05-17-2005, 16:40

E338 Repair Tool Repair & Fix Problems after Bad Unlock

3Hours nOt oNe wEEck it Will Come ! ;)
Direct Download from here !

http://www.kokoom.com/yassinov/images/338-repair-tool.jpg

as I can unload him/it

fantasmino

05-17-2005, 16:42

as I can unload him/it

yassinov®

05-17-2005, 16:45

Still 2 Hours & it come man !

hunk4004

05-17-2005, 16:50

Whats the point in this if CraZZy and or CraSSy repair the phones already?!?

fantasmino

05-17-2005, 16:53

he software and' free?

fantasmino

05-17-2005, 16:54

is he able' to unload him/it from the forum?
thanks

yassinov®

05-17-2005, 16:55

Whats the point in this if CraZZy and or CraSSy repair the phones already?!?

Zdarova !
Nothing special maybe for you ! to this moment people have some troubles with Crazy 'hasp' ,emulator,...!
This tool work only via com cable not Obex,....! to let the things more easy & to be understood,this tool is only a Repair tool for E338 as i say's before !

hunk4004

05-17-2005, 16:55

Why doesn't some moderator close this thread? Crazzy works just fine it's just that a bunch of n00b's use it wrong anyway why didn't you open the post when the program was ready, whats up with the countdown?

fantasmino

05-17-2005, 16:56

I have both the crazzy and the crassy
gives me
connetion time out

yassinov®

05-17-2005, 16:57

is he able' to unload him/it from the forum?
thanks

Free ! man ! don't worry ! ;)

sunnyc

05-17-2005, 16:58

i am try this working 100% thx to yassinov®

hunk4004

05-17-2005, 17:01

Crazzy works just fine it's just that a bunch of n00b's use it wrong anyway why didn't you open the post when the program was ready, whats up with the countdown? Passwords? ecc... Just post it :D

yassinov®

05-17-2005, 17:12

Crazzy works just fine it's just that a bunch of n00b's use it wrong anyway why didn't you open the post when the program was ready, whats up with the countdown? Passwords? ecc... Just post it :D

This screenshot was taken since first test !
i have add other things in my soft before compile it ! so why you can't wait man ! don't worry im not who do these kind of things ! if u don't like to wait 1h&half man allmost can wait ! this all what can say !
More respect please !

hunk4004

05-17-2005, 17:17

fantasmino

05-17-2005, 17:22

yassinov®

05-17-2005, 17:23

I don't need it because i'm a proud owner of the Crazzy 5 from Multicom, what makes me mad is that you should of opened this 3D when the program was ready and furthormore why add passwords and all this cr@p, just post it on rapidshare :rolleyes:
PS. Hi sunny
BR.

Thanks for your notes man ! anyway , i don't says for who need it or not
you don't need it ?! other need it !!
Second note man : More respect here pls !
People read all & understand all ! ;)

hunk4004

05-17-2005, 17:24

does crassy serve you?
What are you trying to tell me? I said CraZZy!

fantasmino

05-17-2005, 17:27

do you know to how many people it doesn't work your crazzy?
I tell you him me.... as

hunk4004

05-17-2005, 17:29

Thanks for your notes man ! anyway , i don't says for who need it or not
you don't need it ?! other need it !!
Second note man : More respect here pls !
People read all & understand all ! ;)
A million NEC solutions are posted daily and it's getting silly because a person can't keep up with them all, i just said you shouldn't of started the thread if the software wasn't ready, I hope it works but please post it somewhere where you don't have to use 007 to get to it and please without the logins and the passwords! Respect to all!!!

hunk4004

05-17-2005, 17:33

do you know to how many people it doesn't work your crazzy?
I tell you him me.... as
Without offence since your a n00b poster, the problem is that not much attention is being used when installing and or using programs without reading the instructions and doing a search in the forum, all you have to do is install Crazzy on Win98se and you won't have any problems whatsoever :D
PS: The real problem is that everyone is using the cracked of CraSSy which doesn't work with Win98se just tell the truth
BR.

fantasmino

05-17-2005, 17:42

I have crazzy and crassy, you/they have worked once only.
I use xp home
then me for a long time connection time out

gsm-decode

05-17-2005, 18:08

Or all you must buy Spear
I have it and no more Crazzy things with nec phones
About the price? Ohh ****!

Blartiartfast

05-17-2005, 18:34

Think it's a good bit of soft....Easy to use, does the job.
Look at the early days of dct3, when Dejan released the first bit of software that could calc faid, unlock, etc. How many versions of the same thing came out for many many months later. Everybody thought this was great then. Granted this software is no masterpiece, but it DOES work.
Some people need more help than others in achieving the same goal, and this forum is a way of helping others to do this.

kikodog

05-17-2005, 19:14

yassinov® - Thanks i upload that to my site, many thanks.

www.smartgsm.cjb.net

the pass for file in my site is rainbow

fantasmino

05-17-2005, 19:23

the software and' hello?
where I can unload him/it
thanks

fantasmino

05-17-2005, 19:37

yassinov® - Thanks i upload that to my site, many thanks.

www.smartgsm.cjb.net

the pass for file in my site is rainbow

have I unloaded the software, when I launch him/it the software does it go out me writing UNREGISTERED COPY That it Means?
THANKS

Pandemonio100

05-17-2005, 19:39

Sorry yassinov® but is better that you explain well what type of repair make your software. ;)

fantasmino

05-17-2005, 20:02

Sorry yassinov® but is better that you explain well what type of repair make your software. ;)

hoscaricato il software E338-Repair- Tool-v1.0,
quando lo apro mi esce questa scritta " unregistered copy"

vorrei sapere se e' free oppure no
scusa se scrivo in italiano
conosco poco l'inglese
grazie

hunk4004

05-17-2005, 20:07

Ahhh so it aint' free?!? Just another BS'er so we hit 1 million and 1 dud NEC all do's :D Please close this thread!!!

fantasmino

05-17-2005, 20:21

ok
era una grande cazzata
grazie

yassinov®

05-17-2005, 20:31

have I unloaded the software, when I launch him/it the software does it go out me writing UNREGISTERED COPY That it Means?
THANKS

Unregistred Copy is a Message From 'ExeCryptor' shareware version ! not about the Soft ! Soft Work & Free !

moldovan

05-17-2005, 20:43

@ yassinov®
Thanks for the soft , but can You explane us , what repair soft do?
Can this soft reviwe IMEI 0044........ after Ivano-Frankowsk rabbit's programm , what formating EEPROM and RAM?
WBR!

basim

05-17-2005, 20:58

I tested it with my E616 restarting after unlocking but the problem still the same.If anybody have a solution please tell me quickly.

Thanks

fantasmino

05-17-2005, 21:03

Unregistred Copy is a Message From 'ExeCryptor' shareware version ! not about the Soft ! Soft Work & Free !

I have to use cable com or I extract usb

basim

05-17-2005, 21:10

use com cable.Sharp GX30 cable with external power works ok.

fantasmino

05-17-2005, 21:18

it doesn't mend the imei
how come?
thanks

uso xp home

Cyber_killer

05-17-2005, 21:26

Does this unlock the newer 338? ver 1.04

hunk4004

05-17-2005, 21:50

NoName®

05-17-2005, 22:09

Some news ? Yassinov® you posted IMEI recalculation soft for free ?

hunk4004

05-18-2005, 20:18

I said this was another dud thread, i don't understand why it wasn't closed

fantasmino

05-18-2005, 21:13

Unregistred Copy is a Message From 'ExeCryptor' shareware version ! not about the Soft ! Soft Work & Free !

have I tried your software, but doesn't it work because?'

yassinov®

05-18-2005, 21:18

yassinov®
Since you tested it and as the thread title states "E338 Repair Tool v1.0 By You"
Can you please post in very simple words, since you tested it already can you tell us if it only unlocks the e338 model? does it change the imei? can you repair the imei? ecc...

Twister , Storm, Volcano,....? or What ?!!
Very interrested in every post about nec softwares man !
Question after question....& u still wait answer from me !
Man if u open ur eyes u will found that ur questions have no mean !
If u read english u will found ur answers at startup text of soft !
Or maybe Moderator maybe can explain you more rules before
write any word next time !

fantasmino

05-18-2005, 23:02

a very simple question....
the software works or it doesn't work
I hope in an answer
thanks

yassinov®

05-18-2005, 23:11

a very simple question....
the software works or it doesn't work
I hope in an answer
thanks
a very simple answer ! it work %

gsm99

05-18-2005, 23:23

Essayez, and after that who is correct.............

fantasmino

05-19-2005, 12:45

Essayez, and after that who is correct.............

I have tried this software, but it doesn't work on the nec 338
imei remains always 0044......

shabeer

05-19-2005, 13:42

is it a forum to discuss or an arcade???

Fonetec

05-19-2005, 20:14

Ok guy's need a little help, custmer give me 338 after he tryed to unlock it himself now phone shows insert correct u sim which every sim you put in it. I have tryed to unlock with Crazzy and it unlocks ok, but when i put sim in still shows insert correct u-sim. Tryed with this software and it says repaired but still the same message on phone. Any body know what the problem is and why crazzy will not fix this ????????