2628 flasher

[impi61]

Hi Guys,<br />Can anyone plse tell me which soft to flash 2628.<br />Have flash file but no soft to use it.<br />Any help much appreciated.

[Lead]

There is no such flasher except the original Ericsson's EMMA II flasher, which requires a hardlock device. That means we cannot flash the A2618, etc by ourselves.

Regards, Lead.

[impi61]

Tnx Lead,

My problem is that I tried to read eeprom with atpro. Now phone is dead, only light blinking once when pressing "NO" . Tried various unlockers like one from John Smith. Prog says unlocking etc but phone still dead. Any solutions !

[Demon_Ok]

Hi.<br />U need upload another EEPROM from good phone.

[Lead]

You have to upload EEPROM from another working phone AND RECALCULATE CHECKSUMS using at2win.<br />The IMEI will not be affected since it is stored in write-protected flash area. <img src="wink.gif" border="0"> <br />The negative effect of doing this is the decalibration of RX/TX module.

Best regards, Lead.

[impi61]

Thanks all for your help.<br />Uploaded image from another phone. Phone switch on no problem. Everything seem OK.

Once again, many thanks.

[alitiago]

hi <br />try to use all eric tool by jethro to download the eeprom from a working cellphone with a size of 64k, then upload it to the defective one. After that use at2win to recalculate the check sum, I think it will bring your cellphone alive.<br />best regards<br />alitiago

[Dead_Pihls]

Hi people!<br />I found at2win, but archive is broken. Can somebody give a link with this real working prog?