View Full Version : PBB Nexus free version
Amir-SkillZ
05-28-2005, 16:47
Hi i downloaded the pbb Nexus free version and its BAM unlock v4.0 in nec 338 with GX30 cable work like a charm any results with other models please post in this thread.....
didnt think it could be done. anyone else test it?
hymer544
05-28-2005, 22:21
Where is the link to pbb nexus please
Blartiartfast
05-28-2005, 22:50
Tried all supported phones and without error on all.
Amir-SkillZ
05-29-2005, 07:31
also have the orignal Crazzy nec Blue Dongle updated for 338 but it did,nt work and it make the phone hang on NEC logo so i use PBB and Here it is All done easily:)
Believe me Its true i check Nec 338 software version *#2820# and its says V4 and Then simple unlock and its done but sometimes it gives IMIE error shown as 000000000000 simple just read orignal imie from back and write in the Change Imie section and press change IMIe and its all Done RESEtting EEprom restarting phone phone unlocked BAAAAM done it again....Spear say only his tool for NEC speciall for 338 V4 can be unlocked but this time i think he is wrong that Free piece of tool Has Brake the Barrier for NEc mobile....Possible for all version on E616v upto v27 and all 616..228..313 and 338 so No need of any Orignal tool now i guess...I also have the orignal Crazzy nec Blue Dongle updated for 338 but it did,nt work and it make the phone hang on NEC logo so i use PBB and Here it is All done easily:)
Look inside Nexus executable file. You can find wp.exe and tailor.dll. There are cracked files from NEC Corporation(Personalization Software), so it's must work :D
Nexus 4.0 is working, but if you're using a bit modificated cable (MAX232) from GX30 (an 10k resistor berween VCC and Rx and 10k between VCC and Tx - You must change the standart reststor /3k/). Works on E228, E338, E616V for unlock & Imei change also repair hangs for E228.
U must connect the phone to COM port (f.ex. COM 1) select model and press the button for selected job. When You change IMEI it will work for an minute. Runs only on M$ Win XP - does't work with USB cable...
firstline
05-29-2005, 16:48
post link please here !!!!!
Amir-SkillZ
05-31-2005, 04:58
emwugsm u mean the normal GX30 cable not modified one Which i have used ...That cable is also used for 228,616,616v and 313 unlocking and imie stuff.????
Mean no need of modification and one thing more i use the com2 so com1 is not really u need u can use com2..
I did not test the 616 616v or 228 or 313 .....Please reply ...That Thread which have nexus in it is been censored or ben removed so me dont know any other link to download..
Amir-SkillZ
05-31-2005, 04:59
emwugsm u mean the normal GX30 cable not modified one Which i have used ...That cable is also used for 228,616,616v and 313 unlocking and imie stuff.????
Mean no need of modification...
I did not test the 616 616v or 228 or 313 .....Please reply ...That Thread which have nexus in it is been censored or ben removed so me dont know any other link to download..
please guys we need the link
if you two serial port in ur pc u can either use it com1 or com2 does not matter. if ur pc has one serial port so com2 will automatically be a virtual port so u will need drivers for usb. yes modified cable can be used for 313 616 and 228 works.
ryumahon
05-31-2005, 06:22
yep!! the free version of nec nexus is 100% wrking with gx30 cable!!! tested without any hazzle!!!!! try it dudes!!!!
i have it...ill upload it in an hour or so
here's the link http://forum.gsmhosting.com/vbb/showthread.php?t=207937&highlight=nexus
Richie-40
05-31-2005, 10:09
and here in case it gets deleted
http://www.ginermen.org/ftp/Nexus.rar.txt
GSM MIND
05-31-2005, 14:20
i have this software but it always giving me error cant conect mobile
REGARDS
GSM MIND
STAND ALONE
realdodo
05-31-2005, 14:31
well....then you might need to change the cable, 'cause the prog works ..
b.r.
Lucky7Napoleon
05-31-2005, 17:26
great great piece of FREE SOFTWARE...
a lot of people of the free market will be happy,
I tested it all the day, with a lots of phones,
a lots of nec 338 and some 616 trying imei change,
WORKED PERFECTLY !!!
thanks
Amir-SkillZ
06-01-2005, 06:24
Ok here we r with this nexus i unlock 616..616v (V24) 313 228 ad 338 with normal GX30 cable without any Hustle..No Modification using COm2 ....Specially and good using Windows Xp Sp2 no errors no Notthig run Quick and Perfect...
ics_igrec_zet
06-01-2005, 11:36
3G market F****D up, what will be next?
BR, xyz
Lucky7Napoleon
06-01-2005, 16:30
3G market F****D up, what will be next?
BR, xyz
****ed? why? 1% of people have, use, find a internet prog like this,
have, use, know a SHARP-GX30 mod cable, have the time, and
in the end have nothing to do that find a way to distroy their phone,
20/40 euro go in a shop and unlock it, and go to work and have s*e*x
again....
free is right, for poor, service and PRICE is good for people with money!
go to steal 5 euro to someonelse, market is f*u*c*k for people
that unlock for 5 euro, not for a pc prog free....
come onnnnnnnnnnnn :mad:
Lucky7Napoleon have 100% right!!!! if you unlock a phone with a free soft you take money same like one who work with payed soft, and market is same!! :D
probably depends on ur pc to me it works alright both on 98 n xp very nice soft.
Amir-SkillZ
06-02-2005, 08:41
All u GooGOO and GaaGaas people out there USE WINXP WITH SP2 No problem Use GX30 normal cable on any Com port Power on Phone and Select Its Model from PBB Nexus and Press Unlock if Phone gets restarted Its ok if not U need To flash it With any Version ( I DO NOT MEAN DOWNGRADE) ...Becoz some times i also have same problem with some 616 and 616v so i flashed it and unlock again its All DONE
ics_igrec_zet
06-02-2005, 10:24
****ed? why? 1% of people have, use, find a internet prog like this,
have, use, know a SHARP-GX30 mod cable, have the time, and
in the end have nothing to do that find a way to distroy their phone,
20/40 euro go in a shop and unlock it, and go to work and have s*e*x
again....
free is right, for poor, service and PRICE is good for people with money!
go to steal 5 euro to someonelse, market is f*u*c*k for people
that unlock for 5 euro, not for a pc prog free....
come onnnnnnnnnnnn :mad:
If more software gets cracked less developpers come with new soft, of course is nobody`s fault because software is bad protected but NO SOFTWARE IS PERFECTLY SAFE, and i think you allready know that
BR, xyz
chowdary
06-02-2005, 12:51
If more software gets cracked less developpers come with new soft, of course is nobody`s fault because software is bad protected but NO SOFTWARE IS PERFECTLY SAFE, and i think you allready know that
BR, xyz
nec software was released free when there wasn't much paid software
spear was the only one then furious team's software and crazzy software came out and these both softwares had bugs and at that spunlock released a free software which worked better than furious team's and crazzy software but nothing changed
and there are so many paid solution and whoever is using this cracked version i am quite sure most of them have got atleast one paid solution for them so it can't effect much the market
br
The sw works fine tested by me on NEC e228.
@Richie-40
Your link works, but header of file is corrupt. Please upload it again..
Regards,
ics_igrec_zet
07-25-2005, 11:29
Check www.unlockeasy.com
BR, xyz
ics_igrec_zet
07-25-2005, 11:34
nec software was released free when there wasn't much paid software
spear was the only one then furious team's software and crazzy software came out and these both softwares had bugs and at that spunlock released a free software which worked better than furious team's and crazzy software but nothing changed
and there are so many paid solution and whoever is using this cracked version i am quite sure most of them have got atleast one paid solution for them so it can't effect much the market
br
As a matter of facts it does affect market, because if softwares r free every unlocker have them, and because they pay "nothing" they unlock for nothing, and if in a town r many unlockers they lower the price
BR, xyz
@ics_igrec_zet
Thanks mate!
Regards,
imran_qasim
07-25-2005, 11:49
when i bought new UNIBOXi my reseller told me that GX30 cable can be used to unlock NEC i've tried it with many other software which used USB cable to unlock but i was not able to unlock a single set then i've heard about NEXUS free version (Cracked) i download it and it successfully unlocked two NEC e616 & e616v and without Language change dat is amazing because when i unlock it using USB cable the software totally change langauge into Chinese , i always need to convert it to English before giving to Client but NEXUS solved my problem now no need to channge the langauge because NEXUS didnt change the Lanaguage and Unlock NEC fine
thnxxx to whoever cracked this software and also who posted it here :)
take care
Amir-SkillZ
07-26-2005, 08:50
Happy to See U Happy
mtony969
07-28-2005, 01:50
when i bought new UNIBOXi my reseller told me that GX30 cable can be used to unlock NEC i've tried it with many other software which used USB cable to unlock but i was not able to unlock a single set then i've heard about NEXUS free version (Cracked) i download it and it successfully unlocked two NEC e616 & e616v and without Language change dat is amazing because when i unlock it using USB cable the software totally change langauge into Chinese , i always need to convert it to English before giving to Client but NEXUS solved my problem now no need to channge the langauge because NEXUS didnt change the Lanaguage and Unlock NEC fine
thnxxx to whoever cracked this software and also who posted it here :)
take care
And i suppose you did this for your customer for free.
You people pay for **** all how you bring yourselves to the shop to buy food
beats me i expect you have a hard job reaching in the pockets i bet that hurts removing stitches round the purse :D :D parasites
imran_qasim
07-28-2005, 06:42
And i suppose you did this for your customer for free.
You people pay for **** all how you bring yourselves to the shop to buy food
beats me i expect you have a hard job reaching in the pockets i bet that hurts removing stitches round the purse :D :D parasites
You can think this but not most of the people thinks like that , if u have crack software and ur doing unlocking then i dont think so its mean FREE :)
Take Care
to unlock nec 3g, fisrt modify cable gx30. connect pin 4 and5 together and pin 8,9,10 together. u don't need to solder them, tied it up with a small soldering wire. it can do the jod. now when u connect phone to cable, it will be in some sort of test mode and u can use crassy to unlock phone.